Something in the world of floating have you stumped?
Show Highlights
What the heck are double stud walls and why would I need them?
Graham and Ashkahn talk about this and how a high level of soundproofing and construction design can make the difference between a perfectly quiet float, and one where you can hear the person chanting and doing yoga in the room next to you and trucks rumbling by outside.
When it comes to float centers, what’s inside the walls is what makes the experiences outside them so special.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question, from one of our listeners is, What the heck are double-stud walls and why should I use them?
Ashkahn: Oh, okay. I was hoping we’d get away with that, talking about why they’re used at all, but they had to sneak that in there, huh?
Graham: Yeah, because the “what” is really the easy part of the question.
Ashkahn: Yeah, it’s two sets of studs in a wall.
Graham: I don’t know actually how to describe it much better than that, except you have actually two sets of base studs or the base plates, two top plates, and you have two rows of studs that make up your wall with an air gap in between them, which can usually be anything from an inch up to a foot or so.
Ashkahn: It’s basically like two walls, like you just have a wall right next to another wall, is what a double-stud wall is.
Graham: As opposed to a single set of studs with the walling material on both sides of that, which would be a single-stud wall.
Ashkahn: Why you use them almost feels like the better part to start with, because they sound really weird without knowing why you’d ever build something like that.
Graham: That takes twice as many materials, twice as much labor.
Ashkahn: Like, “I already have a wall. Why would I build another wall?”
Graham: The reason that you want them is that they help a lot with soundproofing. One of the core parts of soundproofing your float center, and any room that you want to soundproof really, is to have some kind of air gap built into the wall. You can accomplish that through a couple different means.
You can also have a clip and channel system, where you actually attach these clips to a single-stud wall and have some channels you run through there and then put your drywall material onto those channels, and that creates an air gap as well. I won’t go into that too much. You can look it up if you want to see diagrams. It should make a lot more sense than listening to my voice over the air.
For the double-stud wall, it’s actually much more understandable. Those two studs are not connected, and so once you have the sound waves hitting one side of the wall, the material on one side, they’re not just transmitted directly through the studs to the other side of the wall and then out. They hit that wall material and then they have to go through this air gap before they hit the material on the other side and then come out. It turns out that just that transition between solid, air, and back to solid again, is what accomplishes a huge amount of your soundproofing in your rooms.
Ashkahn: The more of an air gap you have in between there, the better it tends to do with soundproofing, so as the sound travels and hits that wall, it gets into that air space in between and it’s basically resonating through that air space. What happens is when you set those two walls further apart from each other, you’re making that air space larger, and as a result you’re making the frequency that it resonates at, which is the most likely or the easiest frequency of sound that can travel through that medium.
You’re making that go lower and lower. The lower you can get it, the better it tends to be for human ears. Our human ears have more trouble detecting it when it’s in those lower ranges than the higher ranges around the human voice and stuff like that. Having that larger sound gap tends to be better soundproofing.
Graham: Similarly with that, because that frequency is specific, we’ve also heard, although we haven’t played around with it much ourselves, that actually skewing the walls a little bit so they’re offset on an angle by a few inches so they’re not totally straight will further increase the cost of your construction, first of all, because not only are you building two sets of studs, now you have to do some crazy scribing on the ceilings because your walls aren’t actually parallel to each other.
Theoretically, that will actually even cut down on that resonant frequency that’s bouncing around in there, because you don’t have one flat plane in front of another, and cut down on the reverberation bouncing back and forth between them as well. That’s something else that can help with that effect. Another question that the listener didn’t ask but which I’d like to ask for them is if double studs are awesome, why not use triple studs or even a quadruple-stud setup?
It turns out in the case of having three sets of studs or sometimes more commonly two studs but you’ve covered both sides of one stud with wall material and both sides of the other stud with wall materials, now you have four times as many or twice as many sheets of walling up there.
There’s names for those. The amount of walls that you have up is called the leaves, is the actual sheets that you have. If, in a double-stud setup, only the outside of either of your studs is covered, that’s two leaves that you have there. If you were to cover, then, the inside as well, that makes it four leaves. Or if you had three sets of studs and only one side of each of them, that would be a triple-leaf system.
Ashkahn: These are actually generally regarded as worse soundproofing than what you could do with the same material were you to just have two leaves, so if you’re using the same amount of lumber and the same amount of drywall and all of that, it’s actually best to just have a solid chunk on the outsides and a big air gap in the middle.
That goes back to that resonant frequency of the air. As soon as you’re cutting that giant air gap into two small air gaps, because now you have a leaf in the middle or a wall in the middle, now you’re making two smaller bodies of air that can, again, resonate at those higher frequencies rather than the lower ones.
For the same cost, for the same amount of materials, and for the same space that it takes up, you generally are best off with as much material on the outsides as possible and as big of an air gap in the inside as possible.
Graham: Yep. To the point where you can use the exact same amount of material and just by switching two of the leaves to the inside of the wall as opposed to all of them being on the outside, you can cut the soundproofing in a quarter, so you’re now being a quarter as effective in your soundproofing just by rearranging the material instead of having that single big air gap.
Ashkahn: The last part of all this is that you want to reduce the amount of resonance once the sound is inside those walls as much as possible, too. That’s where this soundproofing insulation comes from.
While it seems like soundproofing insulation is something that’s going to stop sound from going through, it’s actually much more there to dampen sound on the inside of walls so when sound gets in, instead of bouncing back and forth wildly between your two sets of drywall, there’s sound like rockwool type of material specifically sound-absorbent insulation in there that is meant to dampen it and catch it so that you don’t create this kind of drum-like resonant body inside of your walls. Or as I like to say, guitar-like resonant frequency inside the walls.
Graham: That’s why people use double-stud walls.
Ashkahn: Yeah, good. Solid.
Graham: You think?
Ashkahn: Double solid.
Graham: Thanks for tuning in. We’ll see you tomorrow.
Recent Podcast Episodes
How Marketing Strategies Evolve – DSP 230
Graham and Ashkahn wax nostalgic in this episode tracing back the history of Float On to its origins. They were younger, bright eyed and the world felt full of possibility. How they advertised floating was a whole different beast back then, too. Part of it was how different the industry was, part of it was how different awareness in Portland was, and parts of it were just about Float On still being a young business.
The guys share their successes, lessons, and bold faced mistakes they made along the way in learning how to deal with the idea of filling tanks, as well as some of the constants that have remained throughout the years.
Future Proofing Float Tanks – DSP 229
Float Tanks are expensive. Purchasing tanks can easily end up being half of your opening costs when starting out, so it makes sense to want to purchase tanks that have a long lifespan.
Thinking about which float tank manufacturers might last the longest, though, is probably not the way to think about this issue. For one, it’s impossible to tell what manufacturer is going to be around the longest. What’s more, if anything does break, the vast majority of the time you don’t need to go to the manufacturer to get it fixed in the first place.
Ashkahn and Graham share their thoughts on proper float tank care and the steps any float center owner should take when considering a tank.
How to Run Experiments with Floaters – DSP 228
It’s important to acknowledge that float center owners without a scientific background probably shouldn’t be running experiments on floaters willy nilly. It should also be noted that Graham and Ashkahn aren’t scientists, despite being huge fans of self-experimentation.
There has been a lot of talk recently, however, of float centers collaborating with student researchers to help run experiments, though. Graham and Ashkahn discuss (with a fair amount of levity) what it might take to properly run experiments in a float tank, which they understand is no easy task.
What are Good Plants to Have in a Float Center? – DSP 227
Plants give life, both aesthetically and literally, to any room they’re placed in. The environment inside a float center, however, can be the absolute worst place for certain plants, even ones that would normally be considered fine for your local area.
Graham and Ashkahn pull in Jordan to talk about different plants that thrive in a humid float center environment and some tips on how to take care of them.
Getting Salty With Speakers: Roy Vore – DSP 226
With the Float Conference coming up, Graham and Ashkahn are talking with lots of really smart people who will be presenting this year. It’s not every day that they get to ask molecular biologists questions about float tank sanitation, so they decided to take the opportunity to ask the experts the questions that the industry needs answers to.
Today Roy Vore is taking time to share some of his knowledge about microbiology and water sanitation, along with his work in the pool and spa industry.
Latest Blog Posts
Choosing a Water Heater for Your Center
You may not be surprised to hear that a Float Center is a business which has a hefty water requirement. You may, however, be surprised to hear that the majority of the water demand you’ll be facing day-to-day is going to be in the form of showers and (if you’re doing any laundry on-site) a washing machine.
The factors of energy usage and cost over time should also be taken into consideration when deciding upon your water heater…
Float Fund – NSF Magnesium Sulfate Test Results
I’m happy to announce to first results from the Float Fund testing. This experiment, run through the NSF, was to see how salt water, with no other form of disinfection, actually effected harmful organisms. We ran tests with two different microorganisms, and in this post we’ll talk about how one (Pseudomonas) got its ass kicked by salt-water and how the other one (Enterococcus) didn’t seem phased in the slightest.
If you want to skip straight to the test results, you can download them in their entirety. Since they have a lot of fancy laboratory lingo, we’ll spend the rest of this post breaking down the different aspects of the testing.
Float Memberships and Packages
Customers are great, but getting those customers to commit to returning on a regular basis is even better. There are a few different schools of thought in regards to encouraging return customers, but they’ll generally fall into two main categories, Memberships and Packages.
We’re going to provide a little insight into how to utilize each of them at your center.
Marketing is all About Relationships
Marketing is one of those words that has a lot of different meanings from one person to the next. Personally, I’ve studied marketing in one way or another for the past 20 years. I suppose you can say I’m a marketing nerd (I’ll wear that badge proudly). I even annually budget myself a different marketing conference to go to… for fun.