Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
Staff Doing Tasks Differently – DSP 349
If you run a business, one of the benefits is that it’s run exactly the way you want it, right? If the “millennials” that you hire don’t do the job exactly the way you want, they’re wrong, right?
Well, maybe. It could just be that the people on the ground doing the day to day operations have their own ideas about what works best. Efficiency is a big deal when running a float center and if there’s something that takes 20 seconds longer per room, that could be the difference between a late float and an on time one.
Ashkahn and Graham share their perspective on how best to manage employees who have different ways of operating their shop and how the standards were formed at Float On.
Dealing with Entrepreneurial Dread – DSP 348
Opening a float center is stressful, and when you first get started, there’s a lot of uncertainty involved. Will people keep coming in to floating from one month to the next? Will it be enough to cover costs? What happens if surprise expenses rise up and throw your center underwater.
Graham and Ashkahn discuss the existential dread involve in being a small business owner and what they do to not worry so much about the future of Float On. And also self-immolation.
Leasing Float Tanks – DSP 347
Recently, the float community has been introduced to some companies willing to lease float tanks for businesses. These are usually different from manufacturers and come with a small fee associated with it.
Graham and Ashkahn discuss the issues to consider when looking at these companies and in what situations they might be a viable alternative to purchasing tanks outright.
Expected Capacity for a New Center – DSP 346
If you’re opening a new center and trying to anticipate your business, what’s a reasonable amount of paying customers to expect? What about total capacity including free floats?
Graham and Ashkahn dominate the mic to drop some knowledge on the float family regarding what to expect.
What’s the Most Time Consuming Thing? – DSP 345
Graham and Ashkahn share what they think is the most time consuming part of running a float center. And then next most time consuming things, as well. A great episode outlining the realistic challenges in taking on management of a business.
Latest Blog Posts
Why we’re Excited for the 2018 Float Conference!
It’s Float On’s final year hosting the Float Conference this year. The wails from all our floaty friends can be heard throughout the galaxy as we mourn the end of an era. But, please, dry your eyes, float industry, because this year is going to be amazing.
There’s absolutely no way we’re not going out with a bang, so buckle up and buy your tickets. We’re planning on making this the best Float Conference yet! We have fresh speakers, amazing activities, new podcasts, and a very full schedule. Everything is going to be bigger and better and the parties are going to be off the hook!
Here’s a little bit from some of us putting this event together about what we’re excited about this year.
The Daily Solutions Podcast – Our Top 5 Episodes from June
So, I know that I complain every month about how difficult it is to pick the top 5 each month, but this month it was easy. June was filled with excellent episodes, but there’s a handful of special ones that were just a bit more awesome than the rest (we also blatantly...
Take Part in the 2018 Float Industry Report
We’re gathering responses for our 2018 Industry Report through the end of June, and we once again need your help.
Please take a brief moment to answer a few questions about your float center (or future float center) – it may be the easiest thing you can do to contribute to the growth of floatation around the world.
The Daily Solutions Podcast – Our Top 5 Episodes from May
The seasons are changing now. It’s hard to believe it’s already June, but it certainly is welcome. The weather’s warm, birds are chirping, plants are pollinating, and we have another list of Top 5 episodes of the Daily Solutions Podcast. There really are some amazing...
