Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.

Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”

Ashkahn: Just from the salt in the tools, like in their tool room?

Graham: Yeah, it seems like a long way for-

Ashkahn: This is-

Graham: … salt air to travel.

Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-

Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.

Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.

Graham: Yeah.

Ashkahn: But I guess it is like, it can be very humid, too, in there.

Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.

Ashkahn: That’s good. I would ask these people that question. Like, are you-

Graham: Are you sure it’s salt or could it be-

Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.

Graham: They see the salt residue everywhere is a direct quote from the question.

Ashkahn: Salt residue everywhere, that’s so strange.

Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.

Ashkahn: Right.

Graham: You know, they expect it to be like the ocean.

Ashkahn: Right.

Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.

Ashkahn: Some mist, a sea mist.

Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.

Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.

Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …

Ashkahn: Like a fine, fine mist of-

Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …

Ashkahn: Right.

Graham: There is something about their filtration system… but only around the pump area leave this kind of residue.  So, I wonder what could go wrong that would just sort of do that same vaporization.

Ashkahn: Get it everywhere?

Graham: Or really spread that to your work. All the way to where your tools are?

Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.

Graham: Right, and yeah. Yeah, yeah.

Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?

Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-

Ashkahn: Or this is the door hinges of our front door I’m talking about.

Graham: Oh, I see. I thought you meant of the float room doors.

Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.

Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.

Ashkahn: But it is, you know, at times unbelievably humid in our lobby.

Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.

Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.

Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.

Ashkahn: No.

Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.

Ashkahn: Definitely.

Graham: So, thanks for the question, keeping us on our toes.

Ashkahn: Yeah.

Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast

Recent Podcast Episodes

Using Ozone in Float Tanks – DSP 340

Ashkahn and Graham talk about Ozone in this episode. Everything from different types of ozonators to the efficacy of it as a water treatment system compared to other systems. 

Ozone is very effective, but there are concerns about its use that aren’t present in other types of water treatment, and fortunately the guys give us a lot of information on what to consider when putting together our own systems.

Credit Card Processing – DSP 339

Graham and Ashkahn delve into the wild world of credit card processing. There’s a massive industry of businesses that exist between when your customer swipes their credit card and when it goes into your bank account. The industry seems to be designed to be confusing and some companies only perform certain tasks, making it very difficult to compare services. 

The guys give their advice on how to handle finding the right credit card processor for float centers and what to look out for when you’re on the hunt.

Floating While Pregnant – DSP 338

There are tons of anecdotal stories about pregnant people having great experiences with floating, but what are some of the things you should consider if you’re going to encourage floating while pregnant.

Graham and Ashkahn share what they’ve heard about it and how to frame the conversation with an expecting parent while still covering your bases from a liability standpoint. 

Giving Shares of Your Company – DSP 337

A lot of small businesses have a romanticized idea of what “shares” in a business actually mean. Float On did, once upon a time. What does it mean to give shares of your company to someone? Is it a good way to reward a valuable and dedicated employee? Are there other, more appropriate rewards that you can offer instead? 

Graham and Ashkahn review this question in detail, sharing many questions that any float center owner should consider before offering an employee ownership of your company.

Latest Blog Posts

Beginner’s Guides from Everywhere!

Beginner’s Guides from Everywhere!

If you’re not familiar with the Beginner’s Guide, it’s basically our intro brochure at Float On. About 5 years ago now we made the creation files easily available so folks could edit it as they pleased and sent it out to everyone with an open invitation to do with it as they pleased for their own centers. We know most centers don’t have graphic designers on staff so it seemed like a nice way to help others have reliable, easy to access information for their clients and also serve as a way to save them time and money from having to create their own.

The result of this is that years later, dozens and dozens of centers have a version of these brochures, some of them not even realizing where they originated from. Naturally, we’ve taken a copy from all the centers we’ve visited and we thought we’d share some of them with the rest of you.

Float Success Story – Float Los Alamos

Float Success Story – Float Los Alamos

At the Float Conference every year we hear inspirational stories from float center owners who have carved a piece of the industry out in their salty image. Everyone defines "success" in their own way, and we thought it would be cool to share what that meant to some of...