Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.

Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”

Ashkahn: Just from the salt in the tools, like in their tool room?

Graham: Yeah, it seems like a long way for-

Ashkahn: This is-

Graham: … salt air to travel.

Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-

Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.

Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.

Graham: Yeah.

Ashkahn: But I guess it is like, it can be very humid, too, in there.

Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.

Ashkahn: That’s good. I would ask these people that question. Like, are you-

Graham: Are you sure it’s salt or could it be-

Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.

Graham: They see the salt residue everywhere is a direct quote from the question.

Ashkahn: Salt residue everywhere, that’s so strange.

Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.

Ashkahn: Right.

Graham: You know, they expect it to be like the ocean.

Ashkahn: Right.

Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.

Ashkahn: Some mist, a sea mist.

Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.

Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.

Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …

Ashkahn: Like a fine, fine mist of-

Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …

Ashkahn: Right.

Graham: There is something about their filtration system… but only around the pump area leave this kind of residue.  So, I wonder what could go wrong that would just sort of do that same vaporization.

Ashkahn: Get it everywhere?

Graham: Or really spread that to your work. All the way to where your tools are?

Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.

Graham: Right, and yeah. Yeah, yeah.

Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?

Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-

Ashkahn: Or this is the door hinges of our front door I’m talking about.

Graham: Oh, I see. I thought you meant of the float room doors.

Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.

Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.

Ashkahn: But it is, you know, at times unbelievably humid in our lobby.

Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.

Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.

Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.

Ashkahn: No.

Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.

Ashkahn: Definitely.

Graham: So, thanks for the question, keeping us on our toes.

Ashkahn: Yeah.

Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast

Recent Podcast Episodes

How to Build your Mailing List – DSP 325

Graham and Ashkahn consistently emphasize the importance of mailing lists, but today they dive in deep to talk about how to build a mailing list, giving their best tips and tricks to collecting emails and how to make sure you’re getting the right people signed up. 

How to Deal with Employee Conflict – DSP 324

Graham and Ashkahn address the unenviable task of dealing with disagreements between staff members as a small business. This is an area that Float On has needed a lot of help with in the past. The best practices of Human Resources aren’t very intuitive in interpersonal relationships, so hiring a professional is almost always a good idea.

Float Tanks in the Military – DSP 323

The military is famously tight lipped about the research it does in general. No less so than when researching seemingly benign practices like float tanks. 
Graham and Ashkahn give their scoop on what they know about the military’s use of float tanks in their research and training programs. 

Best Cleaning Practices without Burning Out Employees – DSP 322

Every float center has to compromise somewhere on how much cleaning to do between transitions. Where do you draw the line and how do you make sure that you’re keeping your employees happy without sacrificing sanitation?

Graham and Ashkahn remind everyone that “perfect” sanitation doesn’t exist and that making solutions collaborative in a work environment can do wonders for morale and problem solving in situations like this one.

Good Website Copy for Float Centers – DSP 321

Most websites you visit are filled with words. And that may seem simple, but if you build a website, you’re going to have to be the one to come up with those words. How do you decide what to put up there and how much is too much? What should you focus on? 

Graham and Ashkahn tackle the elusive web copy problem for float centers and provide some helpful tips for anyone who’s feeling a little overwhelmed at the concept.

Latest Blog Posts

Timeline for Opening Up a Float Center

Timeline for Opening Up a Float Center

Opening up a float center is a lot like climbing a mountain. Even if you can see the peak, it’s a lot further away than you think, and when you finally get there, the journey and the destination usually end up being different than previously assumed.

In this post we’ll lay out a general process and timeline of what you may encounter on your path, from initial idea to actually operating a center.

Can you have volunteers at your center?

Can you have volunteers at your center?

So you’re thinking about using volunteers in your float center?

Before we clarify what a “volunteer” actually means, we’ll first explore why a float center might be considering them in the first place. While it can be a way to provide floats to people who are otherwise unable to pay, the impulse to bring in volunteers can also stem from a desire to get some sort of free labor (later in this post we’ll dive into why you can’t actually do this, but it’s important to recognize that the instinct is understandable, especially when you have someone lined up and willing to work for free).

In addition to a desired boost in overall productivity, it’s also a way to invite more people into your center to experience what you do. Some customers actually want to help out and see what happens behind the scenes at a center.

Floating and Athletics, a Strong Relationship

Floating and Athletics, a Strong Relationship

One of the beautiful things about the float tank is that it serves to rejuvenate the whole person. — the body, mind, heart.

Broadly speaking, it’s a tool for homeostasis, an ideal environment that supports balance, health, and growth. This piece will look specifically at floating and athletics. For anyone who defines themselves as an athlete, or as a general pursuant of athletic endeavors, the float tank can be a powerful asset.

In this post, I’ll discuss individual athletes who float and how to look at this from a marketing perspective. I’ll also discuss past and present research, and share some thoughts on how the relationship between the athletic and floating communities might continue to unfold.

A Skeptic’s Guide to Floating

A Skeptic’s Guide to Floating

I think it’s time we addressed the giant metaphorical elephant in the salty metaphorical room — there are lots of exaggerated and untrue claims about the benefits of floating being spread around the industry.

Some are anecdotal, some are only half true, and some are just patently false. Floating has historically had a strong oral tradition tied to it — the practice has survived through word-of-mouth, one passionate floater teaching another everything they know. The unfortunate thing about this is that the information disseminated can’t be reliably tested or shared with others on a broader scale. You can’t use “my buddy Chris” as a source for a health benefit of float tanks in a newspaper article, much less for a research paper.

Now that we’re becoming a bit more mainstream, we thought it would be nice to add some clarity to what we should and shouldn’t be telling people about these difficult-to-understand, saliferous containers.