Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
How to Help Float Research – DSP 300
With the push from Justin Feinstein at LIBR to get more float centers involved in research, many float center owners are chomping at the bit to push studies forward on the benefits of floating. But where do you start and how do you make it happen?
Graham and Ashkahn discuss this idea and how to do research right, as well as some of the things that might be helpful OR harmful to the world of floating in the eyes of the scientific community. There’s a lot of nuanced things to know about proper research and if you go in overzealous without considering how established science is done, it can harm the reputation of the practice.
Tips on Running Power to Float Rooms – DSP 299
Graham and Ashkahn offer some helpful tips to keep in mind when planning out the electrical framework for your float rooms. How many circuits you should plan for, where to place outlets, GFCI compliance, just to name a few.
Definitely an essential episode for anyone to listen to before going into their build-out phase.
Floating in National Media – DSP 298
Seeing float tanks in the national news and culture has increased in regularity within the last few years. Graham and Ashkahn discuss how these things get on such a large platform. The guys briefly go over some of the major stories that have been all over the media and how those stories happened. Mostly it comes down to luck, but there are a few things that can increases the chances of your float center getting on national TV.
The Real Tips on Building Your Own Float Tank – DSP 297
Someone wrote in and asked, again, despite the repeated warnings of the previous episode covering this topic, how to build a float tank properly.
Graham and Ashkahn try their best to restrain themselves and offer some practical advice about how to build your own tanks while also repeatedly warning about things to look out for when going forward with the process.
How to Handle Other Float Centers Spying on You – DSP 296
Graham and Ashkahn talk about how they deal with other float centers spying on Float On.
Basically… they don’t. The float industry is a really open community and a lot of information is generally freely available. If someone is spying on a float center, that could be a result of poor communication skills or a lack of awareness of what information is actually out there. The guys share their advice on how to talk to someone who might be in that situation and how to move forward, hopefully as friends instead of rivals.
Latest Blog Posts
Reflections from the Rise Float Gathering
Over this past weekend, a good chunk of the Float Tank Solutions and Float Conference crew ventured to St. Louis, MO for the first ever Rise Community Float Gathering. Beyond our excitement to see old friends and meet new ones, we were thrilled to be able to attend a float event that we didn’t have to plan.
When it comes to float tanks, we often deal with a lot of the “what” and the “how” of things – what do I need to do to open a float center and how to I make everything work? We write blogs and put out content. We spend our days thinking about conference flowcharts, water chemistry, detailed business plans, soundproof insulation, etc.
Rise, on the other hand, focused on the “why?”
The Story Behind the Float Marketing Forum
Over the past few years, primarily through feedback received from conference attendees and through industry survey responses, float center owners struggled with and wanted a solution to one thing… marketing. It makes sense – if there’s one thing every center needs (besides salt), it’s a solid flow of customers in tanks.
After some brainstorming with Ashkahn, we’ve decided the best solution for this year was to host a series panels covering key marketing topics that will provide the biggest impact in growing your float center business.
Introducing: The Float Conference Marketing Forum.
Announcing the 2nd Ever Start-a-Center Giveaway WINNER!
In what was one of the most difficult decisions that we had to make as a team… and after sorting through nearly 200 entries… we’ve decided upon a winner in our second ever Start-a-Center Giveaway.
Read more to learn who we’ll be guiding through the process in starting a float tank center in their community.
Gut your space before construction!
One line we don’t think you should cross is this: as much as possible, when building out your float center, gut it completely. Start from scratch.
At least then the mistakes you make are your own and your building will hold fewer surprises down the line. There are many benefits that you may not think of immediately. In this post, we’ll guide you through some of them.
