Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
What’s Floating Like Around the World? – DSP 290
Ashkahn and Graham break down the wild world of floating, well… worldwide. They share what they know about the industry in different countries, continent by continent, and gauging which ones are the most float centric vs. those that are the least (hint, it’s definitely Antarctica).
Replacing Filtration Parts for your Float Tank – DSP 289
When it comes to replacing a filtration system for a float tank, there’s sadly no easy answer. There isn’t a one-stop shop place to get replacement parts for float tanks (yet). Most systems are piecemealed together by manufacturers to work specifically for their systems.
In addition to all that, they also often use internal customized materials to accommodate the specific needs of float tank solution. So without some serious internal knowledge of how those systems work, it’s nearly impossible to safely and accurately just swap out one piece for another.
How to Handle Customers Wanking in Tanks? – DSP 288
Graham and Ashkahn tackle the uncomfortable issue of handling customers that may be using the float tank to do things in the tank wasn’t designed for.
They discuss the social aspects along with the sanitary aspects of dealing with ejaculate in the tanks.
Basics of Opening a Business – DSP 287
Graham and Ashkahn take creative license in this episode to talk about the basics of what everyone should know before starting a brick and mortar business.
They want to help others not make the same mistakes they did. This includes everything from getting a legal entity and hiring bookkeepers to making sure you have the correct labor law posters displayed and follow proper hiring practices.
Should People with Ear Tubes Float? – DSP 286
The format for this episode is a little different this time.
Graham and Ashkahn received an anecdote about someone who floated with ear tubes in. The float ends with extreme discomfort and pain when the floater gets epsom salt water in their ears.
The guys highlight this issue as a warning to the industry that this is something that can happen with floating.
Latest Blog Posts
Location Checklist – The Search for Your Float Center’s Home
In honor of our newly minted, fresh off the press, prize winning Construction Packet, we are releasing one of its more succinct components, the Location Checklist, as a free resource. Don’t let the fact that it’s only one page fool you – this set of questions breaks down the major site and location considerations for your center.
Financing Your Center With Bank Loans
If you are looking to open a center, at some point, you have to face the reality that you’re going to need to spend, and thus track down, a good chunk of money. There are many ways to fund a float center – personal capital, family and friends, sending travel funds to the exiled Liberian prince that you met on the internet and using the forthcoming reward money, etc. This post, however, will focus on financing using bank loans.
A Peek Into Our Construction Packet: Planning Your Space – Square Footage and Number of Float Rooms
For anyone opening a float center, one of the earliest questions they’ll have to tackle is, “How big should my space be?” This can be one of the most difficult queries to answer, because it hinges on many variables.
Will you be offering other services? What types of tanks are you getting? What other rooms will your space need? If you’re planning on installing a float tank water slide, that’ll take up extra space, too. I know it’s unreasonable, but Jake really wants someone to do it.
All of these questions aren’t even factoring in thinking about profit margins. It quickly becomes a daunting task that can feel overwhelming.
How to Launch a Successful Kickstarter Campaign
At Float Tank Solutions, our main goal is simple.
We want to provide access to floating for as many people as possible. That’s why, this week, we are opening up our blog to our friend, Shane Stott. Shane, an avid float ambassador, life coach, and founder of Zen Float Co., will walk us through the essentials of running a Kickstarter campaign, with a highlight on his current efforts to raise money through Kickstarter for a documentary on floating.
