Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
Our Top 10 Marketing Book Suggestions! – DSP 255
Alright, this is a dense episode. Ashkahn is busy planning the Float Conference still, so Derek and Graham nerd out on marketing books (and blogs, and podcasts) to give the industry some of their top recommendations for marketing books that might be helpful for the float industry (or anyone, really).
Check the resource in this episode for links to all their recommendations!
What About Instagram? – DSP 254
Facebook gets a lot of attention on this podcast when it comes to talking about marketing on social media, but what about Instagram? It seems to be getting more and more popular, are Instagram ads just as good as Facebook then? Why or why not?
Derek tackles this question with Graham in tow and explains the nuances of the different platforms and why you’d post on one and not the other, despite that they are both owned by the same company.
Should I Change the Name of the Float Center I Bought? – DSP 253
Is it a good idea to change the name of a float center after buying it from someone else? As the industry gets older, more and more people are going to have to answer this question.
Branding is definitely part of the equity of a business and you purchase everything that comes with it. But can you put a price on being happy with your business and making it feel like your own?
Derek and Graham tackle these questions while Ashkahn is away for the Conference.
What’s a Marketing Funnel? – DSP 252
Graham and Derek break down the ins and outs of what, exactly, a marketing funnel is and how to develop one when speaking to banks and investors.
If this is something you don’t understand, you’re not alone! Graham consistently explains how a marketing funnel works in the Apprenticeship every year to a bewildered class. Don’t be afraid to take notes and ask questions.
How to Make Great Videos for Social Media – DSP 251
Derek and Graham talk about video content, and how to use it effectively on social media. There’s a lot of wisdom in keeping videos short and to the point, but they also recommend keeping them low tech (unless you can go really high tech).
Derek also issues a challenge for every float center listening, by September, everyone should go out and film a testimonial video and post it on social media. If you do, let Derek know by sharing it with the Float Tank Solutions facebook page.
Latest Blog Posts
2016 Float Conference Program Introduction
It’s been my pleasure to write the introduction to the conference program for five years in a row, and each year I enjoy posting it up on this blog for everyone who didn’t make it out. I hope to see you all in 2017! – Graham
The Float Tour Blog – Issue #16
We finally took this trip international! Explaining Float Tour to the border guards was a little bit of a challenge (especially through the language barrier), but – after some creative hand gestures and finding synonyms for “sensory” and “deprivation” – we made it through.
The Float Tour Blog – Issue #15
New York is where it’s at, and it’s arguably the busiest place on the planet. People here live fast-paced lives and rarely – if ever – have time to slow the fuck down and enjoy themselves.
Just like Jersey, people here also see skepticism as a point of pride, and take it to an even greater extreme. All of this makes New York a sort of “proving grounds” for floating: if it can make it in New York, it can make it anywhere.
The Float Tour Blog – Issue #14
The Garden State houses probably the highest concentration of float tanks on the East Coast. Jersey is a gateway to the major metropolitan areas nearby: New York City, Philadelphia, and Washington D.C.
This convenience has made Jersey the suburban hub for every major industry on the East Coast for generations, giving it the highest population density of any state in the U.S. This is fantastic for the float industry; if there’s one statistic that correlates with successful float centers, it’s population density.
