Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
Floating with Intention – DSP 205
Not every float is going to be pure bliss. Sometimes the anxiety doesn’t go away. Sometimes that back pain is still there. Are there ways to float with intention to help control the outcome of a float?
Graham and Ashkahn share their thoughts on techniques intended on getting the most out of your float and things that may work, as well as the perils of trying to control how your float goes.
Different Reasons for Writing a Float Center Business Plan – DSP 204
Writing a business plan can often feel like you’re throwing hard work into the void. If you’re not getting a bank loan, who’s going to see it? What’s the point of it if all the numbers are going to be different?
Graham and Ashkahn break down their experiences of starting Float On without a business plan and how useful it was writing one later, as well as how they’ve used that business plan to help dozens of other centers get funding and open their doors.
Is there any Reason to Not Let Someone Float during Menstruation? – DSP 203
Some float centers include a restriction in their wavers stating that people can’t or shouldn’t float during their menstrual cycles. Is there a valid reason for this?
Graham and Ashkahn clear up the confusion around this situation and why float centers started doing this and what every center should know about policies like this.
How Many Times Should A Float Center E-mail about Deals? – DSP 202
Let’s say you’ve got a discount going on and you’re counting on your email mailing list to get some traction. How many times should you email? A lot? A little? Well, the answer depends on who you ask and your own business philosophy.
Ashkahn and Graham share Float On’s philosophy on reaching out to mailing lists and how they reached those conclusions.
Should my Float Center Have Dynamic Pricing? – DSP 201
Dynamic pricing AKA changing prices based on demand or availability, is a pretty common tactic in certain industries. Airlines do it with tickets. Restaurants and bars do it with “happy hour” to get people to come in during slow times.
Graham and Ashkahn weigh in on this practice as it pertains to the float industry and, if you are going to do it, how to do it right so you get the most bang for your buck without confusing your customers.
Latest Blog Posts
The Many Floaty Things We Are Looking Forward To…
Although we encourage people to live in the current moment, the team here at Float Tank Solutions is anxiously looking forward to what’s coming up at the 2015 Float Conference on August 13-17th. Admittedly, we’re a little spoiled being allowed behind the scenes access...
The 2015 State of the Float Industry Survey
Prior to the 2014 Float Conference we set out to get a snapshot of the floatation industry while we had the majority of the community in one place. From that survey we gathered the only statistics we have on floatation and publicly released those findings in our 2014...
Finding the Right Temperature for Your Floaters
What is the Perfect Float Temperature? I am sure we have all heard of the skin receptor neutral temperature that float centers preach. The sacred 93.5 degrees Fahrenheit. It seems to be the temperature that most centers set their tanks’ water to. We even do it at...
How to Properly Wake a Floater
aka What to Do when You’ve Got a “Sinker” There are multiple ways to let your floaters know that it is time to get out of the tank. According to float lore, the first centers to open back in the 70’s used to wake people up by popping open the hatch and giving the...
