Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
Thoughts on franchises vs. mom and pop float centers – DSP 135
As franchises become more common in the float industry, it’s natural for people to start wondering what the benefits and drawbacks are to opening one of them as opposed to simply starting your own center.
Graham and Ashkahn delve into the nuanced differences between each approach, which both have very tangible benefits and drawbacks and whether or not it’s a good idea definitely depends on what kind of business a person wants to run.
How to handle floaters getting out early – DSP 134
Sometimes… floaters get out early. That’s just what they do. But how often should that be happening? And how early? Well… it certainly depends on the length of your floats. If it is happening a lot and you run hour long floats, maybe there’s a common issue that people aren’t telling you. This is where those soft skills come in really handy. It doesn’t hurt to ask, but it also might not be anything to worry about.
Graham and Ashkahn share their experiences with this and what they see as regular floater behavior and what might be a little suspicious, along with some tips to suss out exactly what’s going on if you think it’s happening too frequently.
Thinking about safety and security for offering overnight floats – DSP 133
Being open constantly does come with its challenges, even for float centers. What do you do when the rest of the world goes to sleep but you’re still operating? Doesn’t it get dangerous? What sort of precautions do you have to make to protect your business and your employees.
Graham and Ashkahn discuss security for Float On for the twilight hours when things can go wrong as well as some of the general challenges of running a 24 hour business.
Problems with using certain types of soap – DSP 132
When dealing with the carefully constructed micro-environment of a float tank, any tiny addition can really throw off the appearance or chemistry (just ask anyone who’s had to deal with their water turning orange or green!). The types of soaps you use in your float rooms, along with shampoos, conditioners, and lotions can and will enter your tanks, so it’s important to consider what impact they’re going to have.
Graham and Ashkahn walk through troubleshooting water chemistry problems for this question, to help solve a particular issue.
Methods for filling weekday float sessions – DSP 131
This is a challenging issue for any service based industry. The world still operates on a 9-to-5 schedule, often Mondays through Fridays, finding people with the availability to zen out in those hours can be a challenge, but Graham and Ashkahn have been there and have some insights to the experience. They share what they do at Float On to counter this and when to accept the margins where you’re just not getting people in to float.
Latest Blog Posts
March’s Topic: ‘Start Small or Launch Big?’
This month we'll be talking about something that is especially relevant to everyone just getting started in the floatation industry. Should you start a float center decked out with a full armada of tanks, a 30 ft salt water aquarium, and filter changing robots? Or...
Your Float Center Should Feel Like Home
At True REST we are in our second float center build out and really put a lot of emphasis and thought on the post float interaction and environment.The flow of our Spa is very tranquil and psychologically brings you down each step further into the Spa you get. We...
Relating to the Float Experience
There is no doubt that the short period following the float is crucial for achieving a complete floatation experience. It is during this stage that the first-timer will be setting into place the thoughts that will become how they relate to their float. They have just...
Sales In a Float Tank Center
When we first started Float On, already being regular floaters ourselves and being very familiar with the warm embrace of the post-flow afterglow, we figured that selling things to our float customers after they got out would be the easiest thing in the world. We were...
