Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
Thoughts on floating with a pacemaker – DSP 130
Sometimes you have customers with very specific needs or concerns about their float. In the case of medical concerns in regards to floating, there’s a lot we don’t know. Always always always have your customers discuss any serious medical concerns with their doctor. If for no other reason, if something does go wrong, even if it’s completely unrelated to their float, you’re not on the hook and have to deal with it.
Levels of noise that can affect floats – DSP 129
Soundproofing is costly and difficult, especially for float centers. Most recording studios don’t have to worry about showers or a solution that eats up concrete. It makes sense that we might want to quantify the challenge of sound in a very straight forward way, but the reality is much different than that. Different types of sound can penetrate float rooms at different intensities and different floaters will care more than others.
Graham and Ashkahn share some of their own frustrations with creating their ideal soundproofing for Float On and some helpful tips for identifying noise as well as some advice on how to keep your sanity.
Thoughts on non-compete clauses for employees – DSP 128
Float centers require a lot of upfront capital to get started up, and because of that it can feel like float centers should operate like big business, or perhaps bigger businesses than they actually are. Some centers may consider, at some point, having their employees sign non-compete clauses to prevent them from sharing trade secrets with competitors. Graham and Ashkahn have been at this for a while and express their opinions as to why this probably isn’t the most practical approach for your float center.
How often do you float? – DSP 127
This episode takes the time to have Graham and Ashkahn share their experiences in the tank. They take the opportunity to explain their relationships to floating and how they differ, and in some ways, how they are very similar.
Thoughts on floating with tinnitus – DSP 126
About 15% of people have tinnitus, at least in the United States. It’s one of the most common medical conditions in the country, but most people don’t think about how to accommodate it. Many people who have it don’t even notice it unless they’re in total silence, which adds a particular challenge to float centers.
Graham and Ashkahn talk about their experiences in floating people with tinnitus and how to approach the situation when and if a float becomes problematic.
Latest Blog Posts
2013 Start-a-Center Giveaway Winners Announced!
Look, this wasn't easy. When we launched this, we didn't expect nearly as many submissions as we ended up getting, and certainly not as many that were so compelling. All in all, there were over 140 participants and after reading through all of them, floating on it,...
‘Post-Float Environment and Interaction’
I don't have a lot to offer on this subject, as it has been a long time since I have operated a float center.... But, 'back in the day', it was rather simple: it was really up to the customer/floater how they wanted to be treated, post-float. Some customers wanted...
Lightening the Load Through Meaningful “Post Float” Conversation
The post float environment is as important as the environment in the float room because people are still in slower brain wave states after a float, and they generally seek time to sit down, relax, and process what happened during their float. Probably the best way to...
February Topic: Post-Float Environment and Interaction
The second month of our industry blog has arrived. The topic for February is 'Post-Float Environment and Interaction.' We'll be putting up the first post tomorrow, and you'll hear my take on things a little way through the month. I wanted to take a moment, however, to...
