Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
When it’s Time to Fire Your Customers – DSP 120
This is one of those situations that’s never fun to be in, but it’s something that’s gotta be dealt with. A customer is rude, unpleasant, or makes the staff or other customers uncomfortable. It can start small and turn into a repeated and difficult problem. As the business owner, oftentimes, the buck stops with you and you have to figure out how to handle that situation.
Graham and Ashkahn share their experiences at Float On with their problematic customers and how they handled it while offering tidbits of advice.
Funding your center through Kickstarter – DSP 119
Crowdfunding has made so many projects possible that would otherwise not exist. It seems perfect for niche ideas, concepts that would otherwise never see the light of day, and passion projects that just need to happen. This sounds perfect for float centers, but there are some caveats.
Crowdfunding is time intensive and there’s not guarantee of success. Aside from that, there are some issues with it that complicate things for float centers that other crowdfunded projects likely won’t face. Graham and Ashkahn talk about the successes of float center crowdfunding and the not-so-successes as well.
Don’t Build Your Own Float Tank! – DSP 118
For anyone considering a DIY float tank, give this episode a listen first. This isn’t a discussion on the merits of doing things one way versus another or expressing an opinion on one side and playing devil’s advocate for the other. Graham and Ashkahn know painfully well from personal experience the pitfalls of falling into the hubris trap of thinking you can build your own float tanks. They built two large open tanks in Float On and even years later they still cause headaches.
What’s more, they’ve spoken with dozens of people who’ve also gone through this themselves and heard their horror stories after they didn’t listen to the advice of not doing it.
The perception that it can be a cost-cutting measure or a more reliable way to get an operating float tank in your center by going DIY is generally pretty flawed. There’s so much to it that you just can’t consider before the fact.
Should Your Float Center have a Blog? – DSP 117
This seems like a good idea on paper. It helps with SEO stuff for Google. It gives you an outlet to write about floating and share information about the industry. And it seems to fall in line with something that other businesses do, right?
So what are the downsides? How much time and effort does a blog really take? What sort of impact does it have for a float center? Graham and Ashkahn lay out the pros and cons as well as things you may not initially consider about the responsibility of having a blog.
Thoughts on Buying Yelp Ads – DSP 116
There are lots of businesses that experience the dogged persistence of Yelp sales people calling them. Float On has done both buying Yelp ad space and living without it and Graham and Ashkahn break down exactly what that experience was like.
They also go into exactly what Yelp ads mean and how it impacts your float center (or doesn’t, as the case may be) as well as how well Yelp stacks up in comparison to other ad sources.
Latest Blog Posts
Much Ado About Nothing
Today, I’d like to talk to you about nothing. But first I suppose I should introduce myself. My name is Ashkahn, and I’m one of the co-founders of Float On. I’ve spent the last 2 years of my life entirely devoted to these magical boxes we’ve all discovered, and...
Past & Present of Oasis & Future of Floating
My focus here/now will be on the past [portion of this 'assignment'] that set me up to be involved in floatation work... It was probably inevitable that I would end up involved with float tanks .... When your last name is Wasserman, which means 'waterman' in german*,...
Past, Present, Future
My life is focused around balance. This is the key to everything I do; A balance between cosmic vows of spirituality, family, and the business with the scales constantly being tipped back and forth on the scale.To understand why I am involved in the Flotation Industry...
The Art of Managing Expectations
When considering opening a floatation center, I came across the following story that helped me understand the process that I was going to be going through as the owner of Float Matrix. There once was a plumber who was excellent at what he did. He knew everything...
