Something in the world of floating have you stumped?
Show Highlights
Today brings a curious question about a float center owner who’s trying to deal with salt dust everywhere, including in their tool room. While salt does get everywhere, it can’t evaporate like water can and doesn’t travel through the air very well.
Graham and Ashkahn try their best to answer it and try to figure out what might be causing it, having not experienced something like that themselves at Float On. If any float centers out there have experienced this phenomenon and have any insights, send it our way!
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “What about the phenomena of evaporation resulting in salt residue everywhere? Anyone else have this? Do you have to clean out the HVAC system? We found that some of the tools rust just from the salt in the air. Just from the salt in the air.”
Ashkahn: Just from the salt in the tools, like in their tool room?
Graham: Yeah, it seems like a long way for-
Ashkahn: This is-
Graham: … salt air to travel.
Ashkahn: So, like, this doesn’t really happen to us. Like, I don’t notice in our float rooms, like, salt building up on the ceilings or in the HVAC vents or-
Graham: No, except from people doing the Herbal Essences kind of hair flip when they get out of a float tank. We really don’t find salt just kind of coating things, as though it had been aerated or anything like that.
Ashkahn: Yeah, it’s not like a powder or salt or, yeah. Even on the ceilings of the float tanks, there’s not like a fine dusting of salt or anything.
Graham: Yeah.
Ashkahn: But I guess it is like, it can be very humid, too, in there.
Graham: Yeah, I mean. So I see, you know, when I’ve heard of people that experience rust problems or issues with HVAC vents and things like that, it almost always in talking to them and working through things, ends up being more related to the moisture in the air than actually having salts in the air that’s getting in there. And if the HVAC installers didn’t prepare for the sheer volume of humidity that your float tanks can crank out, then yeah, you can totally hit problems in those vents and in the system as a whole.
Ashkahn: That’s good. I would ask these people that question. Like, are you-
Graham: Are you sure it’s salt or could it be-
Ashkahn: Are you actually seeing salt. ‘Cause if it’s salt, you’d see salt building up on things.
Graham: They see the salt residue everywhere is a direct quote from the question.
Ashkahn: Salt residue everywhere, that’s so strange.
Graham: I mean, so, I can think of a couple things. And from our consulting, I’ve probably heard of things like this a couple times. But, I mean, much more I hear people who are surprised that they don’t see salt getting everywhere.
Ashkahn: Right.
Graham: You know, they expect it to be like the ocean.
Ashkahn: Right.
Graham: Where the ocean is so turbulent, and it’s just kicking up all of these waves and this water.
Ashkahn: Some mist, a sea mist.
Graham: If you drive a car anywhere near the ocean, you just know your car has to be coated or it’s going to rust out from the bottom, and every metal part is going … So, I think people picture that with a float tank center, and are surprised when they open to find that’s actually not the case, which again in Float On, for us, it certainly has not been. So, the couple things I can think of are, if you have something, even like a pinhole leak in your filtration system, there’s a chance that you can be kind of spraying a really fine salt spray around. It’s almost like installer error or something going wrong with the pump system.
Ashkahn: Yeah. Like, I feel like even without any noticeable leaks, I’ve never seen a filtration system that doesn’t just kind of end up getting kind of salty.
Graham: Sure. And most of the time it’s from leaks, but sometimes there is kind of like a fine …
Ashkahn: Like a fine, fine mist of-
Graham: And I guess the most I’ve seen for a fine dust, is a couple of our tanks have …
Ashkahn: Right.
Graham: There is something about their filtration system… but only around the pump area leave this kind of residue. So, I wonder what could go wrong that would just sort of do that same vaporization.
Ashkahn: Get it everywhere?
Graham: Or really spread that to your work. All the way to where your tools are?
Ashkahn: Well, it’s so … Here’s the thing though. I feel like we have had the rusting issue, like our door hinges have … we’ve had to replace those with stainless steel door hinges.
Graham: Right, and yeah. Yeah, yeah.
Ashkahn: So, that’s … but there was no coating of salt on those things like there was or is in our pump areas, and under the pump boxes. So, it leads me to believe what you were saying, that it’s a moisture thing, not a salt thing, right?
Graham: Or that some … whenever you’re in a float room, there’s a chance again, someone’s just shaking out like a dog and getting salt everywhere. They put their salty hands on the-
Ashkahn: Or this is the door hinges of our front door I’m talking about.
Graham: Oh, I see. I thought you meant of the float room doors.
Ashkahn: So, that’s beyond like Herbal Essence range. We’re talking like lobby, front door door hinges, we needed to replace those things, too.
Graham: I was trying to picture situations where people go and shake off specifically near door hinges. I think I’ll concede this point. I think you win this one, yeah.
Ashkahn: But it is, you know, at times unbelievably humid in our lobby.
Graham: Oh yeah, I mean, even with three different dehumidifiers in our lobby, it still gets up to 60%, 70% humidity during those transitions.
Ashkahn: And again, what I see when I saw those door hinges was not what I see when I lift up a pump cover and see like a fine coating of salt on some of the equipment.
Graham: Yeah, so we don’t know. We’re not sure what’s going on with your fine powder, but it is not a common phenomenon.
Ashkahn: No.
Graham: There may very well be other float centers out there. If you have this, definitely write in and let us know if you have theories about it or what tanks you’re using or what your setup is. But again, having talked to a lot of people that don’t have this problem, I would say it’s more the exception than something that you really need to be aware of going into this.
Ashkahn: Definitely.
Graham: So, thanks for the question, keeping us on our toes.
Ashkahn: Yeah.
Graham: And yeah, if you have more questions you want to try to stump us with, go to floattanksolutions.com/podcast
Recent Podcast Episodes
When is it Time to Open a Second Float Center? – DSP 115
Okay, so… Float On only has one location (not counting Float On Hong Kong) and there’s certainly a reason for that. Graham and Ashkahn have toyed with the idea of opening up another center multiple times throughout the years but something else always came up. As they’ve met more people in the industry, they’ve seen some of the pitfalls and successes from people opening additional locations, franchises and whatever else. They share their thoughts on when they think it’d be best to open and why they say to wait a little bit.
Choosing the Hours to Staff Your Float Center – DSP 114
How do you figure out how many people to hire? What’s the ideal hours for a float employee to work? Is there such a thing as too many hours? Too few?
Graham and Ashkahn share their insights with staffing Float On and what their staff looks like to cover all their shifts running a six tank, 24 hour float center.
Tips for Creating an Inviting Float Center Lobby – DSP 113
Not all of us are interior designers, but we all want to have a space that is welcoming to our customers.
Graham and Ashkahn definitely have an eye for this, especially after visiting so many float centers. They share some of their favorite designs they’ve seen, as well as common tactics to help make your center comfy and inviting without necessarily breaking the bank on furniture. They also share some of their pipe dreams for their ideal designs that never came to be.
The Weight of a Gallon of Saltwater – DSP 112
When Graham and Ashkahn get to definitively answer a question, it’s like Christmas. Birds sing and the guys bust out their “Answering a question definitively” dance, which has the added side effect of better crop yields during the coming harvest. It’s an exciting time.
There’s a very straightforward mathematical equation for measuring the weight of salt water based on specific gravity, which is excellent. And useful!
Also, whoever wrote this question needs to contact Graham and Ashkahn ASAP!
Tips on Structuring Your Service Menu – DSP 111
There’s a lot of nuance to how you structure your service menu that can have a significant impact on how your customers spend their money. The size of prices, how they’re ordered or arranged, what price you put first on the menu, etc. all make a difference. Given all these small details, it can seem daunting and make some business owners unsure of where to start or who’s advice to take.
Fortunately, Graham and Ashkahn have been at this for a long time and really dig marketing psychology, so they have lots of advice, tips and even some of the psychology behind why we do the things we do.
Latest Blog Posts
Slowing Down, Letting Go, and Stepping Up to iFloat
My intention for this first blog post is to give you some background into my life, and how and why I ended up running a float center, and teaching courses about metaprogramming in float centers. For as far back as I can remember, I have been fascinated with exploring...
We’ll All Float On
This is the introduction that I wrote for the Portland Float Conference program. I wanted to repost it here, so that all of my zany predictions for the future of floating could be recorded for all time. It also seemed like a good piece to kick off this month's topic...
The First Post (in which the nature of the project is revealed)
There is not enough content out there about float tanks. There is certainly not enough for those of us that are actively running, or trying to start, a center. Float Tank Solutions was launched in an attempt to crush this problem. We've already put up a good amount of...
