Something in the world of floating have you stumped?
Show Highlights
How much does a float tank cost?
Short answer — roughly $18 – 43K.
The slightly longer answer — listen to today’s episode.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, welcome, everybody. Our question today from one of our listeners is: “How much is a sensory deprivation tank?”
Ashkahn: Okay. How much does a float tank coast, huh? It’s a big range, right? I think the full scope of the range, I would say, is probably $10 000 at the lowest to $80 000 at the highest, for a commercial tank. There’s a tank, there’s the Zen Tent, which is $1,900 something. But that’s not really made for commercial use.
Graham: Right. So I guess just to clarify; I assume, since this is a show for commercial float center owners, that this is more on the commercial side. On the commercial side, about $10,000 to $80,000, from the very lowest to the very highest.
And so then the more median range in there, the average range of tanks that people are investing in, what do you think those are?
Ashkahn: There’s only a handful around the $10,000 range, and there’s I think an even smaller handful in that higher $70-$80,000 range. So, really, the bulk of them are somewhere between 20 and 40. Maybe slightly under 20k and 40k, and slightly over 40k, like 17-43k or something is gonna be the large majority of commercial float tanks out there.
Graham: Yeah, I think $17,000 to $43,000 was actually weirdly the numbers that I had in my head. And that’s also for getting commercial set up for the filtration side of things, too.
There are some of these tanks that you can get that have the lower priced models and the higher priced ones, or ones that are meant for home use and ones that are more for commercial settings. So that price range also includes that backside, too; the filtration system and everything that you’d need to be able to put in.
Ashkahn: Yeah, there’s one or two manufacturers out there that will even just sell a tub and you can kind of build the rest of it, so we’re not exactly counting those into this list.
Graham: I’d even say that the shipping and installation is kind of worked into that, too, or if you work that in, maybe it goes just a tiny bit higher.
Ashkahn: Those are good things to consider. I mean, if you’re buying a float tank, those are the things that you might not be quite expecting right off the bat and can vary a lot from tank to tank. Like, if you’re buying a tank that’s being manufactured down the street from you versus being manufactured on a different continent. The shipping cost is probably gonna be different across those two models.
Some manufacturers require for you to pay for installers to come out, so two people will come out and be there and install the thing and teach you how to do it. Other ones will send you the equipment and you can install it yourself.
Graham: I should say that literally before doing this episode, we went and looked at our own tank comparison chart to get a sense for exactly where those numbers were. I totally recommend you go to Float Tank Solutions and download the tank comparison chart and actually get a good look at exactly what these tanks are, and kind of the full range there. You can actually view all the individual units in addition to just having this broad view of price.
Ashkahn: Outside of that, it’s really hard to break it down much further. You might think that cabins are more expensive than pod-style tanks, and I feel like that can be true. You definitely see more cabins in the higher end than you do in the lower end, but there are some cabins out there that are in that $17-18k range.
And there are some tank or pod models out there that are in the $30K-something range, so that’s not necessarily a completely true statement, either.
Graham: And I think that’s all there is to say about that.
Ashkahn: Yeah. Alright. Ship it.
Graham: Lick it and stick it.
Recent Podcast Episodes
Should I Wire my Float Tanks into the Wall? – DSP 265
Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.
On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them.
Can I Keep My Old Ceiling With My Buildout? – DSP 264
Hopefully everyone had a lovely time at the Friday Activities and the after-party.
Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!
Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling.
What to Expect When Expanding from 1 to 3 Tanks? – DSP 263
Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily.
Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags?
Fortunately, these guys know the score and are happy to share.
All About Floor Drains – DSP 262
As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast.
Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider.
How to Deal with Float Room Humidity – DSP 261
Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference.
Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand.
Latest Blog Posts
The Float Tour Blog – Issue #24
Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.
Don’t Mess With Alberta!
At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.
The Float Tour Blog – Issue #23
After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.
The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.
It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.
The Float Tour Blog – Issue #22
We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.
After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.
After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.
The Float Tour Blog – Issue #21
Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.
