Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

In this short, salty, and to the point episode, Graham and Ashkahn talk about installing float tanks on the second floor and how to work with contractors and engineers to determine if you need to reinforce your building to support the weight.

While you usually don’t need reinforcement, it’s always good to check. Listen in above or check out the transcript below and, as always, be sure to send us your questions. All questions welcome, from basic industry questions to well crafted stumpers. If Graham and Ashkahn don’t know the answer, they still relish the journey of discovery and educated guessing.

Show Resources

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Ashkahn: We’ve got a question today about being on the second floor of a building with your float center. So, if you’re thinking about putting a float center on the second floor, do you need to do any structural reinforcement to hold the weight of the float tank?

Graham: Let me just say definitively that, it totally depends.

Ashkahn: Yeah, that I think is a very concrete answer.

Graham: Of course, it’s going to depend on the building, how new your construction is, whether you’re in a big multi-story concrete kind of building or whether you’re in an old wooden Victorian house. There’s a lot that goes into it, but shockingly, the overall answer in almost all of those cases tends to be no. You don’t really need to do any extra reinforcement.

Ashkahn: Yeah, most times people bring in a structural engineer to take a look at things and examine it. Often landlords will even require you to do that.  

Graham: Which you totally should do, don’t just listen to us and be like, “Oh it’s totally fine,” and go forward with it — a structural engineer is a great thing to bring in.

Ashkahn: It usually ends up being that while the float tank is heavy and all the salt water is heavy and all that, it’s just got such a big footprint. The float tanks are so big that the actual amount of pounds per square foot that’s really being put on, is not really as much as one might think. So it tends to be that a lot of buildings can hold it, even the way they are. Especially newer construction, like newer condo type buildings with strong reinforced concrete and stuff like that, tend to not really be much of a concern.

Graham: Again, surprisingly even for older buildings. Often times those are also good to go. Another good reason to consult an expert before spending a lot of money on reinforcements you might not necessarily need.

Ashkahn: Yeah, it’s always weird and there’s always weird stuff out there. I mean, even The Float Shoppe across the river from us, they’re in an old Victorian house and they brought a structural engineer in to check things out before they started and they found they could put float tanks on the second floor but their first floor was not actually strong enough to put float tanks on. Which is really crazy.

Graham: Yeah, so again, consult the experts and if it doesn’t work out, then you always can reinforce anyway.

Ashkahn: Boom.

Graham: Shakalaka.

Recent Podcast Episodes

Surface Disinfectant for Tank Walls – DSP 335

Surface Disinfectant for Tank Walls – DSP 335

What’s the best way to clean the inside of a float tank? And what sort of product should you use? 

It turns out that this deceptively simple line of questioning has a major explanation involved. Ashkahn and Graham share what they’ve learned at the World Aquatic Health Conference about surface disinfectant and the best way to protect your float rooms. 

Surface Disinfectant for Tank Walls – DSP 335

Putting a Shower in A Separate Room – DSP 334

Most float centers run a tight schedule with narrow margins for the transitions between floats. Oftentimes relying on their customers to take reasonably timed showers to fit that schedule. If a single customer takes a shower that’s a bit too long, it can throw of the schedule for the rest of the day!

What if showers were in a separate room? Then customers could shower as long as they want! Ashkahn and Graham explain why this is an extremely bad idea. 

Surface Disinfectant for Tank Walls – DSP 335

Having Doors Open into the Hallway – DSP 333

Float centers, more so than some other brick and mortar businesses, tend to be desperate for maximizing the efficiency of their space. And float rooms would have so much extra space if they didn’t have to deal with a door swinging in and out all the time. Why don’t float centers do it this way instead?

Well… Graham and Ashkahn explain exactly why centers don’t do this already, along with the vast majority of other buildings being made currently. It’s likely a code violation and even if it weren’t, it’d probably be unnecessarily hazardous to travel through your center that way. 

Surface Disinfectant for Tank Walls – DSP 335

Using H2O2 Instead of Chlorine – DSP 332

Let’s say you buy a center and want to use H2O2  instead of the chlorine that was being used by the previous owner. Or maybe you want to switch over to H2O2  after using chlorine for a while. Let’s further assume that this is in compliance with your health department and your UV system is sized adequately. What else do you need to know to make this happen? Do you need to change the water? 

Ashkahn and Graham lay out all the things to consider and why someone may or may not want to replace the solution in their tank at the same time as replacing the water treatment method in a float tank. 

Surface Disinfectant for Tank Walls – DSP 335

How to Sell a Float Center – DSP 331

It’s not an easy decision to sell a float center. But when you do come up to that point, what do you do? Who do you talk to and how does it work? Should you hire on a broker? What sort of timeline should you expect?

Having never sold a business, Graham and Ashkahn aren’t exactly experts on the subject, but they offer informed advice on where to sell and how long it’ll probably take. 

Latest Blog Posts

The Relationship Between the MAHC and Float Tanks

The Relationship Between the MAHC and Float Tanks

The MAHC stands for the Model Aquatic Health Code. This is a document put out by the Centers for Disease Control that is a set of guidelines for recreational water sanitation and operations.

The MAHC is what is called a “model code,” which means it is not a regulation in and of itself. Instead, the CDC puts out the MAHC as a document which they consider to be a really nice set of code language for recreational water facilities (mostly pools and spas). The MAHC includes everything from the process of getting permits…

A New Year, a New Research List

A New Year, a New Research List

When we first released the floatation research list back in 2011, it was as close to a comprehensive list as we could create. It was put together in an effort to illustrate that sensory isolation was a thoroughly studied practice and there was scientific evidence for the health claims we were making.

Many float centers adopted this list for their own uses and put it on their sites, spreading the information and making it more available. 

In this post, you’ll learn about the updates made to our float research list.