Something in the world of floating have you stumped?
Show Highlights
In this short, salty, and to the point episode, Graham and Ashkahn talk about installing float tanks on the second floor and how to work with contractors and engineers to determine if you need to reinforce your building to support the weight.
While you usually don’t need reinforcement, it’s always good to check. Listen in above or check out the transcript below and, as always, be sure to send us your questions. All questions welcome, from basic industry questions to well crafted stumpers. If Graham and Ashkahn don’t know the answer, they still relish the journey of discovery and educated guessing.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Ashkahn: We’ve got a question today about being on the second floor of a building with your float center. So, if you’re thinking about putting a float center on the second floor, do you need to do any structural reinforcement to hold the weight of the float tank?
Graham: Let me just say definitively that, it totally depends.
Ashkahn: Yeah, that I think is a very concrete answer.
Graham: Of course, it’s going to depend on the building, how new your construction is, whether you’re in a big multi-story concrete kind of building or whether you’re in an old wooden Victorian house. There’s a lot that goes into it, but shockingly, the overall answer in almost all of those cases tends to be no. You don’t really need to do any extra reinforcement.
Ashkahn: Yeah, most times people bring in a structural engineer to take a look at things and examine it. Often landlords will even require you to do that.
Graham: Which you totally should do, don’t just listen to us and be like, “Oh it’s totally fine,” and go forward with it — a structural engineer is a great thing to bring in.
Ashkahn: It usually ends up being that while the float tank is heavy and all the salt water is heavy and all that, it’s just got such a big footprint. The float tanks are so big that the actual amount of pounds per square foot that’s really being put on, is not really as much as one might think. So it tends to be that a lot of buildings can hold it, even the way they are. Especially newer construction, like newer condo type buildings with strong reinforced concrete and stuff like that, tend to not really be much of a concern.
Graham: Again, surprisingly even for older buildings. Often times those are also good to go. Another good reason to consult an expert before spending a lot of money on reinforcements you might not necessarily need.
Ashkahn: Yeah, it’s always weird and there’s always weird stuff out there. I mean, even The Float Shoppe across the river from us, they’re in an old Victorian house and they brought a structural engineer in to check things out before they started and they found they could put float tanks on the second floor but their first floor was not actually strong enough to put float tanks on. Which is really crazy.
Graham: Yeah, so again, consult the experts and if it doesn’t work out, then you always can reinforce anyway.
Ashkahn: Boom.
Graham: Shakalaka.
Recent Podcast Episodes
How do you Start Opening a Float Center? – DSP 285
For people just starting out, it can seem really daunting to start a float center. They may not even know where to begin.
Graham and Ashkahn tackle this idea head on. The most important thing is to do a lot of research (definitely check the resources) and to make sure you have people that you can call and refer to for support when you need it.
What to do When Floaters Interrupt Intros? – DSP 284
Ashkahn’s back and on form. He and Graham take on the question of how to handle first time floaters interrupt the pre-float intros explaining the process.
There’s a lot of information that first time floaters need, and if they aren’t paying attention, it can cause messy floats or unnecessary difficulty or confusion. The reunited duo provides some great tips while going over different customer scenarios.
When is the Best Time to Open a Float Center? – DSP 283
Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.
Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.
Tips for Choosing Contractors – DSP 282
Graham the Lone Podcaster takes the reigns on answering how to pick a contractor for float center build out.
It’s the kind of big decision that every float center owner hopes to only make once, so getting as much information ahead of time is extremely useful. Graham breaks down some useful tips and explains how to ask for a bid, specific skill sets to look for, and general advice on knowing when to walk away.
Starting your Pumps Early – DSP 281
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Latest Blog Posts
4,937 Things to Know About Buying a Used Float Tank
You’re thinking about buying a used float tank. Whether this is for a new center, an addition to an existing operation, or a purchase for your home, this is a big decision.
We’ve compiled together some of the major questions and considerations to entertain before making a purchase. While you do have the opportunity to save some money and snag a good deal, there can be hidden costs and unknowns to weigh against those savings.
Offering Overnight Floats
Almost three years ago, we discussed the merits of running overnight floats from an employee’s perspective, focusing on the opportunities of this unique experience as well as its challenges. We’d like to take a deeper dive into this issue because, while the majority of floaters come through our tanks during “normal” business hours, overnight floats form an important part of not only Float On’s identity, but also its business structure and broader culture.
How to Talk About Floating
You step into the elevator and shuffle to the side to make room for the kind-eyed, old woman with the miniature poodle.
“Good morning,” you say with a smile.
“Good morning,” she beams back, her gaze resting briefly on your water bottle with the logo from your float center’s annual party.
After a brief pause, she asks, “What is Float-a-Palooza?”
You take a breath, smile, and launch into your literal elevator pitch.
So, what do you say?
Employee Handbook Template
Whether you are a small or large float center, you most likely have other employees working for you. Regardless of the size of your staff, for reasons of efficiency and legality, it’s essential that your organization has clear and straightforward policies and guidelines. No matter how good employee communication is, it’s always safest and cleanest to have clear parameters and expectations written down.
This is why Float Tank Solutions has created a customizable Employee Handbook Template. Free for anyone to download, it contains federally compliant language (current as of October 2016) and contains a multitude of sections, from employee benefits and compensation descriptions to job guidelines and discrimination policies.
