Something in the world of floating have you stumped?
Show Highlights
When you’re in the business of slinging nothingness, it takes a lot of work to create the ideal float environment.
The hardest factor to get right in the float tank is usually water temperature — preferences are bound to vary across your floaters due to a natural variance in each individual’s skin temperature. Perfection is super subjective from person to person, and it’s hard to adjust for that.
While you can’t always deliver a float in which the air and water temperature are perfect, you can adjust based on individual customer feedback while avoiding extreme temperature variation by closely monitoring your tank’s temperatures.
In today’s episode of the Daily Solutions Podcast, join Graham and Ashkahn on their search for the holy grail of floating — the perfect temperature.
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Okay, welcome. We have a good question today, which is, “How do you set the temperature in your float tank, so that it’s comfortable for all of your floaters?”
Ashkahn: This is probably the most frustrating thing about running a float tank center, as far as I’m concerned, is getting the temperature right. It’s not like light and sound, right? With light, there is complete darkness, and it just is dark. There is a maximum darkness you can achieve. With sound, there is a maximum quiet you can achieve.
Graham: That’s true too. Sound is also a very challenging one to get, too.
Ashkahn: It’s challenging.
Graham: I don’t think any float center gets to absolute quiet.
Ashkahn: Sure, but at least the goal is the same. You’re trying to hit an endpoint that’s ubiquitous for everybody.
With temperature, it’s not like that. If you have the perfect temperature for one person, it’s not going to be the perfect temperature for the next person and that’s the part to me that’s really frustrating about it. Unlike everything else we’re trying to control, where you can just move closer and closer to some sort of abstract perfection that’s out there somewhere. With temperature, it just doesn’t work like that. There is not a human temperature that every single person is going to find perfect.
Graham: Even the accepted average human body temperature, or what we put into a lot of our float tank literature, ends up being 93.5 degrees. I know float centers that keep their float tanks more at 94 degrees, for example, or 94.2, or more in the 93.4 range. It kind of varies a little bit across the board and honestly, as far as I can tell, the temperature of 93.5 degrees just comes straight from John Lilly, and probably isn’t necessarily our external average body temperature, but is in my opinion more likely to be John Lilly’s experimental body temperature that was just what he was comfortable in.
Ashkahn: You know, there’s like a million variables too. There’s not only the temperature of the water, but there’s how are you measuring the temperature of the water? Is it the built-in thermometer in your float tank? Are you using a reference thermometer?
Where are you measuring it from? The whole body of water is probably not one single temperature so where you’re taking the measurement from differs, and then there’s air temperature. That to me is a huge part of it that makes it very difficult to just say one number.
You could have 93.5 degrees and no humidity in the air and it would feel exceptionally colder than 93.5 degrees with an extremely humid environment, like we find on float tanks. That level of humidity that’s changing, and the temperature of the air that’s changing, all that factors into what it feels like temperature-wise to be in a float tank.
There’s all those things going in and then someone just comes out and says, “I’m cold.” You’re like, “Okay, do I need to change the water temperature? Or the air temperature? Or the humidity level? Or where I’m measuring my temperature from with my thermometer?”
It’s just crazy.
It’s total madness.
Graham: Now that we’ve established that once again almost any question you ask us is going to be met with a huge, nebulous form of answer. Because we don’t actually really have concrete answers to a lot of these, let’s go in and break it down a little more diligently here, I guess.
Backing up, because what you said made a lot of sense to me, even just how you’re measuring the temperature has a huge impact on it. Let’s start there.
We have in our tanks built-in thermometers that give us readings, usually on the controller or sometimes out in the lobby, for our float tanks. There’s a lot of options out there. Specifically we use ThermoWorks, is the brand that we use for our thermometer. It’s a good lesson that any technology that you bring into your float center, even things that are made for a wet environments, kind of have a life that’s maybe not long for this world.
We actually check the temperature with those reference thermometers three times a day, I think is what our generator does. That allows us to have this comparison point for making sure A, that our temperatures are actually accurate again, down to that .08 degrees, but also just that our readings coming out of the float tanks themselves aren’t going haywire and freaking out.
Ashkahn: Even that is still not enough, definitely the most frequent complaint we get, if we are to get complaints from customers is that they felt too cold or that they felt too hot.
As far as I’m concerned, we just don’t have the technology yet to have every person have a very comfortable float. In addition to the humidity and all the other stuff I said, just people run differently right?
People run warmer or colder than other people. People run different temperatures than themselves. If someone comes in, in the morning, or if they come in at night, or if they just worked out, or if they just ate food.
Graham: That’s so true.
Ashkahn: All these things change your perception. We’ve even found that people taking warmer or colder showers before they hop into the float tank will change their perception of how hot or warm, hot or cold it was in there. At the end of the day, it feels much more like we have a handful of heuristics to try to deal with this, rather than any technological or systematic approach.
Graham: Yeah, and even it gets down to being as subjective as what you ate for breakfast this morning or how active you were before coming in to float. I know that if I go for a jog and go into float, everything is just way too hot, and I have to have the door wide open, take a really cold shower before I get inside and it still feels just really warm and way too muggy when I get inside there. Versus normally I actually need to turn down the temperature on the tanks anyway a little bit. I don’t nearly get as overwhelmed with that.
I remember we had a bricklayer who was coming in to float with us and he’d just get off his crazy eight, nine hour days of laying bricks and would come in. He would have to have the temperature way turned up because his body was running so warm from all the physical exertion that if it was at the regular temperature, he felt like it was almost ice cold or something, just because his own core was so hot, which is interesting.
Ashkahn: Yeah, so what do we do in practice to deal with this?
Graham: I still like our idea of the stickers that we put on the wall that don’t actually do anything, so that when people push them, they think that they’re raising and lowering the temperatures themselves, but they’re actually just pushing stickers.
Ashkahn: Yeah, there’s definitely a lot of it that’s just control. Feeling cold in there and not being able to do anything about it, I think is just an uncomfortable experience. Even the perception of doing something to get your tank warmer. One thing we do is we put notes on people’s accounts. They’ll come in. They’ll say that they’re a little bit cold.
Graham: That’s the real answer, although the sticker I think is the future solution for it.
Ashkahn: I mean, even with putting notes on people’s accounts, all the people come back in and I’ll forget to do it. I won’t turn the tank up. I won’t see the not until after they float or something like that. They’ll come out after they’ll float and they’ll be like, “Thank you. That was perfect that time. Thanks so much for turning it up.” I’m just like, “Yeah, you know, no problem.”
That’s part of it right, trying to turn it up. When we’re talking about turning it up or turning it down, we’re talking about fractions of a degree here, so nothing crazy. Usually if someone says they want to turn it up the first time, I’ll turn it up like three tenths of a degree or something like that, maybe four tenths of a degree.
Graham: Yeah, and it’s really rare actually that we even get to the point where we need to raise it a full degree for people. That’s how slim that margin of error is. If you get it off by half a degree, or it’s just half a degree going the wrong direction for someone, all of a sudden it’s just way too warm for them, or it’s way too cold. Yeah, I guess just to summarize and drive the point home that we’ve been saying this whole time; there is not perfect setting for the float tanks.
No matter how good you get it, no matter how much you’re measuring with reference thermometers, ultimately it’s just going to come down to; it’s going to be one of the complaints that you get the most. Having a good system, like notes on people’s accounts and making sure that your staff are trained up to actually go in and really make those adjustments every single time, ends up being really important and can be the difference between having a regular customer who loves floating and having someone who thinks all float tanks everywhere are slightly too cold for them and there’s no way they’d go back in there.
Ashkahn: I feel like when it really comes down to it, there’s three main things that we do is;
One is keeping the notes on people’s account and adjusting it a little bit person to person.
The second one is listening to feedback. If we get a bunch of complaints about people being cold or a bunch about people being hot, that’s how we know to slightly adjust things.
The third is seasonality. I just think that your tanks need to be a little bit warmer in the winter and a little bit cooler in the summer for probably a combination of reasons, like just the fact that everything is warmer and colder and your building is kind of warmer and colder in those months, as well as I think people tend to run warmer or colder. As winter descends, I think our bodies adapt to it a little bit and as the summer comes out our bodies do too. It’s just like we’re in slightly different places in those seasons.
Graham: Is that just your feeling or is that based on science or something you read?
Ashkahn: I read something. I feel like I’ve read … All right, I’ll have to look this up more, but I was reading something on the internet not too long ago.
Graham: People listen to us like we know what we’re talking about.
Ashkahn: This is what I’m saying. There was something about the perception of heat and cold with the seasons. Our skins actually will adapt over the course of multiple days to different weather, which is why the same temperature in the beginning of winter feels much colder than it does at the end of winter for us. Your skin actually, over the course of a short period of time will adapt to warmer, cooler weather. This is something I briefly skimmed on the internet.
Graham: It sounds very ‘sciency,’ I believe you.
Ashkahn: That’s what I’m saying. Yeah, I believe me too. That’s pretty much, that’s good enough for me I think.
Graham: All right, thanks so much for listening to today’s episode. Now you know, there is no actual perfect temperature in the float tanks.
Recent Podcast Episodes
When DON’T you Feel Like Floating? – DSP 275
Graham has Juliet on the podcast today since Ashkahn is doing some post-Conference traveling.
The duo talks about times when floating just doesn’t feel like a good idea, which is something they have a bit of disagreement about. Juliet shares her experiences being cautious of her experiences in the tank and how she tends to have to be more mindful of when she floats.
How do you Handle Changing Memberships? – DSP 274
This year at the Float Conference, Derek hosted a marketing forum and took questions that he wanted to share with everyone here.
This episode focuses on how Float On handles memberships, including tiered memberships and how to gracefully transition from one type of membership to another.
Are Vapor Barriers a Good Idea for Float Centers? – DSP 273
You can tell when Graham starts to miss Ashkahn when he makes a soundboard made up of sound clips from previous episodes just to have Ashkahn do another intro.
Jake and Graham break down barriers in this episode. Vapor barriers, that is. These tools are a little confusing in the construction world and their efficacy is hotly debated in just regular construction, never mind the demands that a float center has, especially in regards to moisture protection. Fortunately, Graham and Jake know a thing or two about a thing or two and explain what vapor barriers are, how they work, and what the source of contention is.
What to Consider with Plumbing in a New Float Center – DSP 272
Graham and Jake talk about the confusing world of plumbing for your float center. There are any number of unpleasant surprises that can come about when planning the water lines to showers, getting floor drains in place, and making sure everything lines up how it’s supposed to. If the sewer main is too deep or not where you think it is, it can add a significant amount of cost to your build out just to get floor drains installed. Fortunately, the guys have some useful tricks to help mitigate costs and plan accordingly.
Should I use Spray-in Insulation for my Float Center? – DSP 271
Graham and Jake are still in a sans Ashkahn world at Daily Solutions, but they’re not letting it harsh their mellow.
The guys are talking about the different types of spray-in insulation today. It’s a pretty common material in construction and it can be a fantastic insulator for float centers, if you get the right type.
Jake and Graham go over the differences between open cell and closed cell insulation and why, specifically, float centers should avoid open cell insulation. They also provide some excellent pointers on the materials themselves and good conversations to have with a contractor regarding insulation.
Latest Blog Posts
Oh, the Questions You’ll Hear!
When you run a float tank center, you’re going to get asked a lot of questions. Do I float naked? Can I drown? Is this sanitary? Many of these are easy to answer: It’s recommended. Not without a conscious, and determined effort. Yes! There are some questions, however,...
Happy TANKSgiving (Giving Gifts to Monthly Members)
Monthly memberships are an important way to ensure that your float tank center has a consistent, if not dependable, amount of business.
While pricing structures for memberships vary widely across the industry, we’re focusing less on the strategy of what to charge and looking more at the benefits we’re actually offering. Once we’ve established a solid offering, then we can revisit pricing.
Running a successful monthly membership program takes more than just charging customers and making sure they use their credits. With a little creativity, we can find ways to increase engagement.
Your Flow Meter May Be Inaccurate (and what to do about it)
Float tanks tend to use a lot of parts borrowed from the pool and spa industry and, whenever that happens, it’s always important to question whether that pool part works accurately with our salt water solution. We’ve recently gained some insight into that question on...
The Float Tour Blog Roundup!
The following is our collection of links to the all of the Float Tour blogs. My chronicling of our adventure, highlighting all of you out there.
Thank you for the memories.
