Something in the world of floating have you stumped?
Show Highlights
Graham and Ashkahn share their expertise on the nuances of filling a float tank; how much salt to use, how long it takes, and what to expect during this process with your equipment. After all, who hasn’t wondered whether their mechanical drive filtration pump can handle epsom salt filled water?
Show Resources
FTS Blog – How to Drain and Fill a Float Tank
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, so today is another one of those relatively basic questions: How long does it take to fill a float tank for the first time and have it ready for people to float?
Ashkahn: Okay. Well, it depends on the float tank a little bit.
Graham: Absolutely, and the process that you’re going through, and your grit and determination as well.
Ashkahn: Yeah, your sheer willpower. So probably the biggest thing that makes a difference on time is whether or not your float tank has an in line heater, also called circulation heaters. For those of you who don’t know, float tanks are heated through a few different methods, whether they have a heating pad or some sort of heating system under the tub or around the sides of the tub or in the walls or something that’s heating the water and the air. The other method is where you actually have a part of your filtration system and there’s a chunk of pipe that is the heater. It’s a metal tube that has a heating coil inside of it that gets really hot and, as the water passes by, it heats it up.
Graham: And heats it up really fast.
Ashkahn: Real fast. I mean, it makes sense. It is way more efficient, right? You literally have a heating coil directly in the water you’re trying to heat versus trying to have a heating pad heat through fiberglass, which is a natural insulator, and it eventually gets its way into the water.
Graham: Yep, or even through a liner too. It would still take quite a while to heat up. So let’s do the slower process first. Let’s say that they’re filling up a tank and all it has is under tank heaters. There’s no special process for heating up the water, other than whatever is coming out of their water heater.
Ashkahn: Right. That’s where it starts. You really want to be using water that’s as hot as possible, and that’s just because the process of the salts dissolving sucks heat out of the water. It’s an endothermic reaction and actually makes the water colder. It’s kind of crazy, you can take a clump of salt and pour hot water into it and by the time it hits your hand, going through all the salt it would be cold. Or if you have salt in the tank and you’re stirring it with your hand, you just feel pockets of cold water around your hand as you’re stirring it.
Graham: It’s always the thing that I say whenever people ask if we dump the float water in between every single person. I mean it would take, in this case, probably a good eighteen hours to fill the tank?
Ashkahn: Eight to twelve, usually. If you’re diligent and you do it in this hardcore way. For us, that means we will fill it with as much hot water from our hot water heater as we can. It actually pays off to wait for your water heater to heat more hot water up — faster putting cold water into the float tank. It just makes the process of dissolving the salt more difficult too.
At a certain point the saturation point of the salt differs based off the temperature. The colder the water is, the less salt you’re going to be able to dissolve in it. Unless you’re at that ninety-three, ninety-four degree float tank water, you’re not even gonna be able to dissolve the full amount of salt you need to in there. If you’re trying to mix salt in the cold water, it’s just not gonna work. You won’t even, at a certain point, be able to mix it in and certainly will mix in less easily. It’s kind of like trying to mix sugar into iced tea versus hot tea.
Graham: Yep, and so there’s also this process when you’re filling it up of kind of doing it — we do it directly into the float tanks. Some people will pre-mix water into buckets and mix it up that way.
Ashkahn: Yeah, it’s pretty intense though.
Graham: It’s a little bit of an intense process. Again, to each their own. Manufacturers will also have different recommendations for your specific float tank. Be sure to check with them. Some don’t seem to care if salt gets sucked into their pump and they’re running the pump the entire time, even when salt is dissolving. Other manufacturers want you to have the salt all mixed up in the water before you’re running the pump system.
Ashkahn: Yeah, and I don’t think any pump manufacturer is gonna tell you that’s great for the pump, to have salt crystals shooting through it. To me, it’s worth it … We’ve had pumps for a while … I mean, magnetically driven pumps that … I don’t really notice a lot of salt damage on them. If this pump was gonna last us ten years and, because we’re constantly using it to mix salt it lasts us nine years, to me that’s a fine pay off. I’m happy to have a pump that lasts one less year if that means I get to kick it on and help me mix the salt and water around much more vigorously than I can do by myself.
Graham: Yeah, and that being said, definitely be careful with it. Especially if you have a mechanical pump and not a magnetic pump. I would be a little cautious, or at least follow your manufacturer’s’ recommendations.
Ashkahn: In this method — putting in hot water, adding salt, mixing it up, adding more hot water, adding more salt, and just going back and forth like that as you fill it up — it usually takes us two, three, or maybe four hours to actually mix everything in. The other eight to twelve hours is just spent waiting for the water to get back up to temperature.
Graham: Yeah, and it totally depends on the heaters too, whether you have fiberglass layers between there or you’re going straight through a liner. The entire process can take varying degrees of time, increasing anywhere from one degree an hour to a couple degrees an hour. The pace can be as low as half a degree an hour, depending on the type of heating inside your tank.
Ashkahn: However, if you have one of those inline heaters it tends to go a lot faster. With those, you’re heating the water up way faster. It dissolves the salt faster, gets up to temperature faster — the whole process is decently improved by having an inline heater.
Graham: Yep. So again, it’s that same three or four hours to actually get everything in there, mix it together, make sure that your water level is actually up to the point where the pumps can suck it in, things like that. And then probably another couple hours, I would say, running the pumps.
Ashkahn: Maybe even slightly less. They’re pretty efficient and powerful.
Graham: Yeah, so maybe in the five hour range?
Ashkahn: Yeah, that sounds right, I guess. Four.
Graham: This is something that manufacturers are aware of, too. A lot of manufacturers are making their tanks with the intention of trying to make it easier and quicker to fill them up and get them up to temperature.
Ashkahn: Yeah, these are getting better, for sure.
Graham: You’re actually seeing this combination of, almost for this specific reason, inline heaters and under tank heaters. Once you have the water all filled up, the inline heaters are good in case there is an emergency and you need to bring things up to temp real quick.
Ashkahn: They’ll save you some energy, and they help in between floats to take a little of the work off the under the tank heaters — this is certainly one of their super powers.
Graham: Which is really nice. So there you have it, kind of fumbling through that one. If it’s your first time filling this up, it will definitely take you a little longer so I definitely recommend planning on an entire day to actually set aside to get the hang of this and learn the ropes.
Ashkahn: It’s really much less of an exact science than you’d think. You might think it’s like, “Add 327 pounds of salt. Step one.” And then, “Put in 62 gallons of water.”
Graham: Like a baking recipe.
Ashkahn: Yeah, it’s really not. You just kind of dump it all in there and slowly hone in on the right specific gravity and you can be way more haphazard with it and it’s fine. It’ll get you there and there’s really not much of an actual science to it.
Graham: One thing to watch out for when you’re doing this, as well, is salt collecting on the bottom of your tank and you not mixing that in appropriately and letting it sit there (if you have under tank heaters). What will happen is that salt will gather right over the heaters. Salt is basically a big heat sink and all the heat that wants to go into your water is instead going straight into your salt. It’s crazy, it’ll actually harden on the bottom of your float tanks and turn into, basically, big crystalline sheets. You can feel your water and it’s still just icy cold and you feel the bottom where there’s these salt sheets and it’s incredibly hot because it’s sucking up all of the heat.
Especially in something like a linered tank system, these things get really sharp and I get scared about ripping liners. You can burn out your heaters in a case like that because the heaters don’t want to be tossing all of their heat into this already hot body. It can cause a lot of problems. One thing to be really adamant about, or diligent about, during those first few hours when you’re mixing everything together, is making sure that stuff isn’t collecting on the bottom that’s really getting mixed around, that you’re doing your part to help that salt dissolve and mix up.
Ashkahn: Excellent. Hopefully that’ll help you out.
Graham: Yeah, good luck with filling your tank. We also have a great Float Tank Solutions blog post that kind of walks you step by step through the process that we use.
Ashkahn: Start by adding 327 pounds of salt.
Graham: Until then.
Recent Podcast Episodes
How to Build your Mailing List – DSP 325
Graham and Ashkahn consistently emphasize the importance of mailing lists, but today they dive in deep to talk about how to build a mailing list, giving their best tips and tricks to collecting emails and how to make sure you’re getting the right people signed up.
How to Deal with Employee Conflict – DSP 324
Graham and Ashkahn address the unenviable task of dealing with disagreements between staff members as a small business. This is an area that Float On has needed a lot of help with in the past. The best practices of Human Resources aren’t very intuitive in interpersonal relationships, so hiring a professional is almost always a good idea.
Float Tanks in the Military – DSP 323
The military is famously tight lipped about the research it does in general. No less so than when researching seemingly benign practices like float tanks.
Graham and Ashkahn give their scoop on what they know about the military’s use of float tanks in their research and training programs.
Best Cleaning Practices without Burning Out Employees – DSP 322
Every float center has to compromise somewhere on how much cleaning to do between transitions. Where do you draw the line and how do you make sure that you’re keeping your employees happy without sacrificing sanitation?
Graham and Ashkahn remind everyone that “perfect” sanitation doesn’t exist and that making solutions collaborative in a work environment can do wonders for morale and problem solving in situations like this one.
Good Website Copy for Float Centers – DSP 321
Most websites you visit are filled with words. And that may seem simple, but if you build a website, you’re going to have to be the one to come up with those words. How do you decide what to put up there and how much is too much? What should you focus on?
Graham and Ashkahn tackle the elusive web copy problem for float centers and provide some helpful tips for anyone who’s feeling a little overwhelmed at the concept.
Latest Blog Posts
Timeline for Opening Up a Float Center
Opening up a float center is a lot like climbing a mountain. Even if you can see the peak, it’s a lot further away than you think, and when you finally get there, the journey and the destination usually end up being different than previously assumed.
In this post we’ll lay out a general process and timeline of what you may encounter on your path, from initial idea to actually operating a center.
Can you have volunteers at your center?
So you’re thinking about using volunteers in your float center?
Before we clarify what a “volunteer” actually means, we’ll first explore why a float center might be considering them in the first place. While it can be a way to provide floats to people who are otherwise unable to pay, the impulse to bring in volunteers can also stem from a desire to get some sort of free labor (later in this post we’ll dive into why you can’t actually do this, but it’s important to recognize that the instinct is understandable, especially when you have someone lined up and willing to work for free).
In addition to a desired boost in overall productivity, it’s also a way to invite more people into your center to experience what you do. Some customers actually want to help out and see what happens behind the scenes at a center.
Floating and Athletics, a Strong Relationship
One of the beautiful things about the float tank is that it serves to rejuvenate the whole person. — the body, mind, heart.
Broadly speaking, it’s a tool for homeostasis, an ideal environment that supports balance, health, and growth. This piece will look specifically at floating and athletics. For anyone who defines themselves as an athlete, or as a general pursuant of athletic endeavors, the float tank can be a powerful asset.
In this post, I’ll discuss individual athletes who float and how to look at this from a marketing perspective. I’ll also discuss past and present research, and share some thoughts on how the relationship between the athletic and floating communities might continue to unfold.
A Skeptic’s Guide to Floating
I think it’s time we addressed the giant metaphorical elephant in the salty metaphorical room — there are lots of exaggerated and untrue claims about the benefits of floating being spread around the industry.
Some are anecdotal, some are only half true, and some are just patently false. Floating has historically had a strong oral tradition tied to it — the practice has survived through word-of-mouth, one passionate floater teaching another everything they know. The unfortunate thing about this is that the information disseminated can’t be reliably tested or shared with others on a broader scale. You can’t use “my buddy Chris” as a source for a health benefit of float tanks in a newspaper article, much less for a research paper.
Now that we’re becoming a bit more mainstream, we thought it would be nice to add some clarity to what we should and shouldn’t be telling people about these difficult-to-understand, saliferous containers.
