Something in the world of floating have you stumped?
Show Highlights
Graham and Ashkahn share their expertise on the nuances of filling a float tank; how much salt to use, how long it takes, and what to expect during this process with your equipment. After all, who hasn’t wondered whether their mechanical drive filtration pump can handle epsom salt filled water?
Show Resources
FTS Blog – How to Drain and Fill a Float Tank
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Alright, so today is another one of those relatively basic questions: How long does it take to fill a float tank for the first time and have it ready for people to float?
Ashkahn: Okay. Well, it depends on the float tank a little bit.
Graham: Absolutely, and the process that you’re going through, and your grit and determination as well.
Ashkahn: Yeah, your sheer willpower. So probably the biggest thing that makes a difference on time is whether or not your float tank has an in line heater, also called circulation heaters. For those of you who don’t know, float tanks are heated through a few different methods, whether they have a heating pad or some sort of heating system under the tub or around the sides of the tub or in the walls or something that’s heating the water and the air. The other method is where you actually have a part of your filtration system and there’s a chunk of pipe that is the heater. It’s a metal tube that has a heating coil inside of it that gets really hot and, as the water passes by, it heats it up.
Graham: And heats it up really fast.
Ashkahn: Real fast. I mean, it makes sense. It is way more efficient, right? You literally have a heating coil directly in the water you’re trying to heat versus trying to have a heating pad heat through fiberglass, which is a natural insulator, and it eventually gets its way into the water.
Graham: Yep, or even through a liner too. It would still take quite a while to heat up. So let’s do the slower process first. Let’s say that they’re filling up a tank and all it has is under tank heaters. There’s no special process for heating up the water, other than whatever is coming out of their water heater.
Ashkahn: Right. That’s where it starts. You really want to be using water that’s as hot as possible, and that’s just because the process of the salts dissolving sucks heat out of the water. It’s an endothermic reaction and actually makes the water colder. It’s kind of crazy, you can take a clump of salt and pour hot water into it and by the time it hits your hand, going through all the salt it would be cold. Or if you have salt in the tank and you’re stirring it with your hand, you just feel pockets of cold water around your hand as you’re stirring it.
Graham: It’s always the thing that I say whenever people ask if we dump the float water in between every single person. I mean it would take, in this case, probably a good eighteen hours to fill the tank?
Ashkahn: Eight to twelve, usually. If you’re diligent and you do it in this hardcore way. For us, that means we will fill it with as much hot water from our hot water heater as we can. It actually pays off to wait for your water heater to heat more hot water up — faster putting cold water into the float tank. It just makes the process of dissolving the salt more difficult too.
At a certain point the saturation point of the salt differs based off the temperature. The colder the water is, the less salt you’re going to be able to dissolve in it. Unless you’re at that ninety-three, ninety-four degree float tank water, you’re not even gonna be able to dissolve the full amount of salt you need to in there. If you’re trying to mix salt in the cold water, it’s just not gonna work. You won’t even, at a certain point, be able to mix it in and certainly will mix in less easily. It’s kind of like trying to mix sugar into iced tea versus hot tea.
Graham: Yep, and so there’s also this process when you’re filling it up of kind of doing it — we do it directly into the float tanks. Some people will pre-mix water into buckets and mix it up that way.
Ashkahn: Yeah, it’s pretty intense though.
Graham: It’s a little bit of an intense process. Again, to each their own. Manufacturers will also have different recommendations for your specific float tank. Be sure to check with them. Some don’t seem to care if salt gets sucked into their pump and they’re running the pump the entire time, even when salt is dissolving. Other manufacturers want you to have the salt all mixed up in the water before you’re running the pump system.
Ashkahn: Yeah, and I don’t think any pump manufacturer is gonna tell you that’s great for the pump, to have salt crystals shooting through it. To me, it’s worth it … We’ve had pumps for a while … I mean, magnetically driven pumps that … I don’t really notice a lot of salt damage on them. If this pump was gonna last us ten years and, because we’re constantly using it to mix salt it lasts us nine years, to me that’s a fine pay off. I’m happy to have a pump that lasts one less year if that means I get to kick it on and help me mix the salt and water around much more vigorously than I can do by myself.
Graham: Yeah, and that being said, definitely be careful with it. Especially if you have a mechanical pump and not a magnetic pump. I would be a little cautious, or at least follow your manufacturer’s’ recommendations.
Ashkahn: In this method — putting in hot water, adding salt, mixing it up, adding more hot water, adding more salt, and just going back and forth like that as you fill it up — it usually takes us two, three, or maybe four hours to actually mix everything in. The other eight to twelve hours is just spent waiting for the water to get back up to temperature.
Graham: Yeah, and it totally depends on the heaters too, whether you have fiberglass layers between there or you’re going straight through a liner. The entire process can take varying degrees of time, increasing anywhere from one degree an hour to a couple degrees an hour. The pace can be as low as half a degree an hour, depending on the type of heating inside your tank.
Ashkahn: However, if you have one of those inline heaters it tends to go a lot faster. With those, you’re heating the water up way faster. It dissolves the salt faster, gets up to temperature faster — the whole process is decently improved by having an inline heater.
Graham: Yep. So again, it’s that same three or four hours to actually get everything in there, mix it together, make sure that your water level is actually up to the point where the pumps can suck it in, things like that. And then probably another couple hours, I would say, running the pumps.
Ashkahn: Maybe even slightly less. They’re pretty efficient and powerful.
Graham: Yeah, so maybe in the five hour range?
Ashkahn: Yeah, that sounds right, I guess. Four.
Graham: This is something that manufacturers are aware of, too. A lot of manufacturers are making their tanks with the intention of trying to make it easier and quicker to fill them up and get them up to temperature.
Ashkahn: Yeah, these are getting better, for sure.
Graham: You’re actually seeing this combination of, almost for this specific reason, inline heaters and under tank heaters. Once you have the water all filled up, the inline heaters are good in case there is an emergency and you need to bring things up to temp real quick.
Ashkahn: They’ll save you some energy, and they help in between floats to take a little of the work off the under the tank heaters — this is certainly one of their super powers.
Graham: Which is really nice. So there you have it, kind of fumbling through that one. If it’s your first time filling this up, it will definitely take you a little longer so I definitely recommend planning on an entire day to actually set aside to get the hang of this and learn the ropes.
Ashkahn: It’s really much less of an exact science than you’d think. You might think it’s like, “Add 327 pounds of salt. Step one.” And then, “Put in 62 gallons of water.”
Graham: Like a baking recipe.
Ashkahn: Yeah, it’s really not. You just kind of dump it all in there and slowly hone in on the right specific gravity and you can be way more haphazard with it and it’s fine. It’ll get you there and there’s really not much of an actual science to it.
Graham: One thing to watch out for when you’re doing this, as well, is salt collecting on the bottom of your tank and you not mixing that in appropriately and letting it sit there (if you have under tank heaters). What will happen is that salt will gather right over the heaters. Salt is basically a big heat sink and all the heat that wants to go into your water is instead going straight into your salt. It’s crazy, it’ll actually harden on the bottom of your float tanks and turn into, basically, big crystalline sheets. You can feel your water and it’s still just icy cold and you feel the bottom where there’s these salt sheets and it’s incredibly hot because it’s sucking up all of the heat.
Especially in something like a linered tank system, these things get really sharp and I get scared about ripping liners. You can burn out your heaters in a case like that because the heaters don’t want to be tossing all of their heat into this already hot body. It can cause a lot of problems. One thing to be really adamant about, or diligent about, during those first few hours when you’re mixing everything together, is making sure that stuff isn’t collecting on the bottom that’s really getting mixed around, that you’re doing your part to help that salt dissolve and mix up.
Ashkahn: Excellent. Hopefully that’ll help you out.
Graham: Yeah, good luck with filling your tank. We also have a great Float Tank Solutions blog post that kind of walks you step by step through the process that we use.
Ashkahn: Start by adding 327 pounds of salt.
Graham: Until then.
Recent Podcast Episodes
Benefits of a Free Float Giveaway – DSP 315
Float On has been known throughout the years for pulling off outlandish marketing stunts with mixed success. For example, we ran a giveaway on social media back in 2014 for a full year of free floats to our lucky winner.
Derek and Ashkahn provide a follow up on the success of that campaign and talk about the primary, secondary, and tertiary benefits that came from doing such a major giveaway.
The Importance of Social Media – DSP 314
Social media seems to be the only marketing platform that anyone talks about anymore. How to do facebook ads, when to post on Instagram, how to improve Google SEO… it’s a broad topic that seems to dominate the conversation in marketing.
Ashkahn and Derek explain not only why it seems this way, but the misconception of relying too heavily on social media in marketing strategies, as well as a defense of social media as a platform.
How to not be salesy selling memberships – DSP 313
Derek and Ashkahn give the low down on pitching memberships to customers. A lot of float center owners don’t want to come off as pushy sales people after people get out of their floats.
Ashkahn sympathizes with this a lot, since that’s exactly how he felt when he first started selling memberships for Float On. He and Derek suggest a perspective shift on the idea of memberships, as lots of customers end up being appreciative of the opportunity, and don’t feel like they’re being overly pitched to.
Why is Water Treatment Important? – DSP 312
If float tank water is safe, in part because of all the salt, then why is there such a huge emphasis in the industry for water treatment? After all, there haven’t been any reports of anyone getting sick because of floating.
Ashkahn and Graham tackle this question and challenge the idea on its face, because, well, just because something hasn’t been reported doesn’t mean it doesn’t happen, and given how little is known about water treatment in float tanks, it’s a good idea, as an industry, to minimize the risk of infections and illness as much as possible. Really, there’s a lot of reasons, from peace of mind, complying with health regulation standards, and even marketing, to maintain your float tank solution to as high a standard that you can.
Soundproofing Windows of Your Float Center – DSP 311
Graham and Ashkahn discuss soundproofing windows of a float center, but first they talk about which situations may even warrant soundproofing in the first place. It may be that soundproofing is better prioritized elsewhere.
If you do decide to soundproof your window, the guys give you some tips on how best to do it and what to look for when picking out which type of glaze you may want along with a few other options.
Latest Blog Posts
What? Another Product Announcement? The New and Improved About Float Tanks Guide!
We’ve learned a lot since then, so has the industry and the rest of the world. Floating is no longer considered some obscure practice. The industry has become very well established the world over and is continuing to grow. As such, the About Float Tanks Guide in particular desperately needed updating.
There has been new research, new standards in manufacturing, and as an industry, we have a much better understanding of all things float tank.
Download the latest version today!
Announcing: The 2017 Float Tank Industry Report
In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We've released one every year since, and this year we (once again) have the most contributions that we've ever had. In total, 193 existing...
Working with a Landlord
If you’re planning on opening up a float center, it’s likely that you’ll end up renting and, therefore, working closely with a landlord. Like any business relationship, it takes communication, discernment, and openness to make a renter-landlord relationship feel truly comfortable.
Everyone involved is taking a risk and the reality is that, when it comes to floating, it’s probably more risk than your average small business – craft shop, bar, hair salon, law office, what-have-you.
This piece also includes a free download – a compilation of support letters from float center landlords!
Employees vs. Independent Contractors. Which is better when offering additional services?
Part of what makes all of this so confusing is there isn’t a one-size-fits-all set of actions that differentiates a standard employee from an independent contractor. Your State regulators, the federal Department of Labor, and the IRS all have their own criteria for what constitutes an “independent contractor”. Here, we’ll just be using the IRS definitions as a sort of jumping off point to the issue. If the status of employees is ever challenged, the IRS determines the status on a case-by-case basis over several criteria by a panel of judges, very similar to American Idol.
Basically it comes down to who is in control of the work. How much control does the company have over the type of job being done vs. how much control does the person providing the service. This manifests in different ways, but to fit the definition of an independent contractor, a service provider really does have to be independent. Beyond just using this guide, you should always consult an HR lawyer if you feel like there’s any confusion or ambiguity.
Basically, the rules fall into three main categories…
