Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

In today’s Daily Solutions Podcast, Graham & Ashkahn dole out some advice on (not) running pumps when floaters are in your tanks.

The best case scenario if a pump goes on with someone still in it — their float is ruined. Worst case scenario? Their hair could get stuck in the filter or worse.

In our risk-averse society, these disaster scenarios compel us to set up safeguards to make sure they never happen. At Float On, we make it a point to never run a tank when a floater is still in it.

As they say, “Plan for the worst, hope for theta waves.”

Show Resources

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is, “I’ve heard different things about running the pump while someone is in the tank. Is it safe or not?”

Ashkahn: Oh boy. Okay, okay.

Graham: I’m just going to shoot from the hip here and say I have serious concerns about running the pump when someone is in the tank.

Ashkahn: We should kind of give some pretext here about this is very much like our opinion, I don’t know.

Like every float tank can be different and there are subtle things that you can do with the way that your filtration system’s set up, and the piping and all that, that can change the answer to this question.

Graham: Now I feel bad about shooting from the hip so quickly.

Ashkahn: Shooting from the hip is part of it. It’s part of the game.

Graham: All right, so Ashkahn’s totally right. There are huge disclaimers that come along with this conversation.

Ashkahn: Let’s just talk about why it could be a concern, right?

Graham: So one of the things that is true about float tanks that isn’t necessarily even true about pools and spas and things like that, is that the pump tends to be, in a lot of float tanks, very close to where the inlet is.

Ashkahn: So we’re basically concerned about someone’s hair getting caught in the pump, and that having a disastrous result.

Graham: And you might have heard of things like entrapment or the Virginia Graeme Baker Act, the GBA, and all that stuff is more-

Ashkahn: It’s the Virginia Graeme Baker Pool and Spa Safety Act, is the official title.

Graham: Sorry. The VGBAPNSA.

Ashkahn: VGBPASA.

Graham: So the deal with that though is the idea of getting trapped against a suction inlet, not that your hair is going to get actually entangled in the mechanical parts of a pump, which makes, I guess, the possibility of entrapment or of something going wrong in a float tank, again one that has the pump so close to where the inlet is, slightly terrifying.

Ashkahn: Yeah, because in pools they have their pumps often twenty, thirty, forty, a hundred feet away in piping between where the pump room is and where these kind of inlets are in the pool, so it’s just slightly different logic with float tank. You are floating horizontally in this water, your head’s usually somewhere right near these things, depending on which way you’re floating in the tank.

So it’s very unlikely, for this to happen would be statistically like pretty crazy, but the consequences are so huge, which is why it makes it kind of a nerve-racking thing to think about. Like were this to happen to someone, it would be pretty bad.

Graham: And I should say I know of absolutely no one who this has ever happened to.

Ashkahn: And you’d have to have like two-feet-long hair, and all this, everything would just have to go just right. But at the end of the day there is, I guess it still seems, like a possibility at least in certain float tanks or certain setups, et cetera, with all those disclaimers. Which is why it makes us nervous.

We try not to do it, not just try, like we have certain systems set up in our shop to allow us to not run the pump while somebody is in the float tank.

Graham: Yeah, and at least in ours, we’re in those setups where we do, we have pump systems that are very close to where the inlet is in the float tank, so there is that risk if someone did have a couple-of-foot long hair, that they could get it entangled into the pump system, and so we’d rather get someone into a float late than risk rushing the other person out by turning on the pump in the room and risking their hair getting entangled.

Ashkahn: For us that’s a general rule, we do not run the pumps while people are in the float tanks, and for the same reason we don’t have our float tank controls on automated schedules either, because we don’t want the pump to just always turn on five minutes after the music or whatever it is.

We want a human being to actively make the decision to turn the pump on every single time the pump runs, and that way they always know to make sure there’s nobody in the float tank and that they’re actually kind of in control of the situation.

Graham: So it definitely puts some restrictions on the schedule and we have to do things like pay attention to when showers are going on the rooms, which is usually our cue that someone’s out of the float tank, we use the shower going on.

And we actually have shower sensors now, since we’ve opened, installed in our rooms, that let us know when the different showers go on for our different rooms, so we can pay attention without being big creepers and just kind of listen in the hallway for the various showers to turn on after we hit the music.

Ashkahn: And that’s about enough confidence for me. I guess technically in some weird scenario, someone could turn the shower on and go like get back into the float tank, and lie back down. But at that point it just seems so improbable that it’s hard to justify making plans around that.

Graham: Yup, and the other place that you’ll hit this other than just me and Ashkahn being paranoid, is health departments talking to float tank centers and them being paranoid about this exact same thing. We’ve even talked to health departments that are afraid about someone hopping back in the tank after they’ve gotten out and showered.

For them, even having a shower indicator might not be enough of a protocol in order to protect someone, right? Sometimes they actually want more extreme measures like you have to visually see the person or know that they’re out of the tank.

Ashkahn: Yeah.

Graham: So not very common but that’s the level, and it’s the exact same reasons that we’re scared are the reasons that they get paranoid again, even about someone hopping back in to get their wedding ring out of the float tank or something like that.

Ashkahn: So yeah, you know, and a lot of float tanks, there’s maybe a concern, some with long piping or just kind of different setups this kind of same logic may not hold true, but it’s at least something to keep in mind and to realize that it might not just be that you’re disturbing someone in the float tank when you’re turning the pump on.

There may be a kind of serious risk there.

Graham: Yeah, I still feel bad about shooting from the hip at the beginning. Is there anything else that we need to say here? Disclaimers at the end that we need to get out as well?

Ashkahn: Hopefully this has just never happened and won’t be a problem.

Graham: And we’re just paranoid?

Ashkahn: Yeah. That’s the ideal world.

Graham: All right, there you have it guys.

Recent Podcast Episodes

Should I Wire my Float Tanks into the Wall? – DSP 265

Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.

On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them. 

Can I Keep My Old Ceiling With My Buildout? – DSP 264

Hopefully everyone had a lovely time at the Friday Activities and the after-party.

Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!

Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling. 

What to Expect When Expanding from 1 to 3 Tanks? – DSP 263

Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily. 

Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags? 

Fortunately, these guys know the score and are happy to share. 

All About Floor Drains – DSP 262

As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast. 

Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider. 

How to Deal with Float Room Humidity – DSP 261

Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference. 

Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand. 

Latest Blog Posts

The Float Tour Blog – Issue #24

The Float Tour Blog – Issue #24

Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.

Don’t Mess With Alberta!

At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.

The Float Tour Blog – Issue #23

The Float Tour Blog – Issue #23

After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.

The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.

It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.

The Float Tour Blog – Issue #22

The Float Tour Blog – Issue #22

We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.

After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.

After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.

The Float Tour Blog – Issue #21

The Float Tour Blog – Issue #21

Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.