Something in the world of floating have you stumped?
Show Highlights
In today’s Daily Solutions Podcast, Graham & Ashkahn dole out some advice on (not) running pumps when floaters are in your tanks.
The best case scenario if a pump goes on with someone still in it — their float is ruined. Worst case scenario? Their hair could get stuck in the filter or worse.
In our risk-averse society, these disaster scenarios compel us to set up safeguards to make sure they never happen. At Float On, we make it a point to never run a tank when a floater is still in it.
As they say, “Plan for the worst, hope for theta waves.”
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “I’ve heard different things about running the pump while someone is in the tank. Is it safe or not?”
Ashkahn: Oh boy. Okay, okay.
Graham: I’m just going to shoot from the hip here and say I have serious concerns about running the pump when someone is in the tank.
Ashkahn: We should kind of give some pretext here about this is very much like our opinion, I don’t know.
Like every float tank can be different and there are subtle things that you can do with the way that your filtration system’s set up, and the piping and all that, that can change the answer to this question.
Graham: Now I feel bad about shooting from the hip so quickly.
Ashkahn: Shooting from the hip is part of it. It’s part of the game.
Graham: All right, so Ashkahn’s totally right. There are huge disclaimers that come along with this conversation.
Ashkahn: Let’s just talk about why it could be a concern, right?
Graham: So one of the things that is true about float tanks that isn’t necessarily even true about pools and spas and things like that, is that the pump tends to be, in a lot of float tanks, very close to where the inlet is.
Ashkahn: So we’re basically concerned about someone’s hair getting caught in the pump, and that having a disastrous result.
Graham: And you might have heard of things like entrapment or the Virginia Graeme Baker Act, the GBA, and all that stuff is more-
Ashkahn: It’s the Virginia Graeme Baker Pool and Spa Safety Act, is the official title.
Graham: Sorry. The VGBAPNSA.
Ashkahn: VGBPASA.
Graham: So the deal with that though is the idea of getting trapped against a suction inlet, not that your hair is going to get actually entangled in the mechanical parts of a pump, which makes, I guess, the possibility of entrapment or of something going wrong in a float tank, again one that has the pump so close to where the inlet is, slightly terrifying.
Ashkahn: Yeah, because in pools they have their pumps often twenty, thirty, forty, a hundred feet away in piping between where the pump room is and where these kind of inlets are in the pool, so it’s just slightly different logic with float tank. You are floating horizontally in this water, your head’s usually somewhere right near these things, depending on which way you’re floating in the tank.
So it’s very unlikely, for this to happen would be statistically like pretty crazy, but the consequences are so huge, which is why it makes it kind of a nerve-racking thing to think about. Like were this to happen to someone, it would be pretty bad.
Graham: And I should say I know of absolutely no one who this has ever happened to.
Ashkahn: And you’d have to have like two-feet-long hair, and all this, everything would just have to go just right. But at the end of the day there is, I guess it still seems, like a possibility at least in certain float tanks or certain setups, et cetera, with all those disclaimers. Which is why it makes us nervous.
We try not to do it, not just try, like we have certain systems set up in our shop to allow us to not run the pump while somebody is in the float tank.
Graham: Yeah, and at least in ours, we’re in those setups where we do, we have pump systems that are very close to where the inlet is in the float tank, so there is that risk if someone did have a couple-of-foot long hair, that they could get it entangled into the pump system, and so we’d rather get someone into a float late than risk rushing the other person out by turning on the pump in the room and risking their hair getting entangled.
Ashkahn: For us that’s a general rule, we do not run the pumps while people are in the float tanks, and for the same reason we don’t have our float tank controls on automated schedules either, because we don’t want the pump to just always turn on five minutes after the music or whatever it is.
We want a human being to actively make the decision to turn the pump on every single time the pump runs, and that way they always know to make sure there’s nobody in the float tank and that they’re actually kind of in control of the situation.
Graham: So it definitely puts some restrictions on the schedule and we have to do things like pay attention to when showers are going on the rooms, which is usually our cue that someone’s out of the float tank, we use the shower going on.
And we actually have shower sensors now, since we’ve opened, installed in our rooms, that let us know when the different showers go on for our different rooms, so we can pay attention without being big creepers and just kind of listen in the hallway for the various showers to turn on after we hit the music.
Ashkahn: And that’s about enough confidence for me. I guess technically in some weird scenario, someone could turn the shower on and go like get back into the float tank, and lie back down. But at that point it just seems so improbable that it’s hard to justify making plans around that.
Graham: Yup, and the other place that you’ll hit this other than just me and Ashkahn being paranoid, is health departments talking to float tank centers and them being paranoid about this exact same thing. We’ve even talked to health departments that are afraid about someone hopping back in the tank after they’ve gotten out and showered.
For them, even having a shower indicator might not be enough of a protocol in order to protect someone, right? Sometimes they actually want more extreme measures like you have to visually see the person or know that they’re out of the tank.
Ashkahn: Yeah.
Graham: So not very common but that’s the level, and it’s the exact same reasons that we’re scared are the reasons that they get paranoid again, even about someone hopping back in to get their wedding ring out of the float tank or something like that.
Ashkahn: So yeah, you know, and a lot of float tanks, there’s maybe a concern, some with long piping or just kind of different setups this kind of same logic may not hold true, but it’s at least something to keep in mind and to realize that it might not just be that you’re disturbing someone in the float tank when you’re turning the pump on.
There may be a kind of serious risk there.
Graham: Yeah, I still feel bad about shooting from the hip at the beginning. Is there anything else that we need to say here? Disclaimers at the end that we need to get out as well?
Ashkahn: Hopefully this has just never happened and won’t be a problem.
Graham: And we’re just paranoid?
Ashkahn: Yeah. That’s the ideal world.
Graham: All right, there you have it guys.
Recent Podcast Episodes
Long Term Construction for Float Centers – DSP 260
Ashkahn is still gone, getting ready for the Float Conference. The festivities kick up this week, and he’s busy working diligently to make all our dreams a reality.
In the meantime, Jake and Graham tackle the notion of ongoing maintenance and the ever evolving nature of a float center. Jake sets the record straight on the concept of having a “finished” float center, as new problems always arise. It’s not all bad news, though, as these changes allow for new opportunities for your centers.
Best Insulation for Soundproofing – DSP 259
This is another fantastic episode that challenges the question on its face.
Graham and Jake (still no Ashkahn, unfortunately, but he is in the intro) talk about soundproofing basics and what type of insulation is a good idea for your float rooms. As it turns out, insulation isn’t doing much of the heavy lifting though, so soundproofing probably isn’t the highest priority when selecting insulation.
How to Make an ADA Float Room – DSP 258
Graham and Jake are in the studio again while Ashkahn plots his marvelous float industry event.
This time the guys are talking about how to make a float room ADA compliant. Lots of it is going to vary from state to state (and sometimes even city to city) but there are some useful tips and tricks for making sure you hit all the right marks for compliance when planning your build out.
Jake and Graham share construction ideas, ways to think about ADA requirements, and some fun stories about Float On’s own adventures in making their building accessible.
Best Quietrock for Float Rooms – DSP 257
While Ashkahn is off doing whatever it is Ashkahn does when not on the podcast, Graham sits down with Jake Marty the Float On construction guy (and co-owner of Float On), to talk about Quietrock.
Now before you rush to the Resources section to see which ones are best, this episode lays out the reason to use Quietrock, when (and how) to compromise for more affordable options, and where you may not want to use this when planning your build out.
Marketing to Older Demographics – DSP 256
Some communities have a much higher retiree population than others. It can be difficult to reach customers who don’t utilize social media as much, so how do you get their attention?
Derek and Graham strategize on how to market to the retiree community for float centers. This episode is filled with bingo jokes, rambling examples, and solid advice for reaching out to any demographic that may not spend a lot of time on social media.
Latest Blog Posts
The Float Tour Blog – Issue #20
We now follow the trail of our ancestors, Meriwether Lewis & William Clark, whose expedition started in St. Louis and would, eventually, lead them to Oregon – just like us.
Except, unlike them, we didn’t actually start in St. Louis, don’t have a tour guide from the Lemhi Shoshone tribe, and aren’t carrying flintlocks (except for Graham).
The Float Tour Blog – Issue #19
Chicago is home to one of the oldest float centers still in operation – SpaceTime Float Tanks.
We had the misfortune of timing our visit as they were moving to a larger location, the only time in 34 years that they have ever been closed. It is with great regret that we were unable to see their historic float center in operation.
They were trailblazers even before there were trails to blaze – so many float centers in the entire Midwest trace their roots back to a single float at SpaceTime.
The Float Tour Blog – Issue #18
We made it back to America, everybody. It was a harrowing experience being in an uncivilized country where they think gravy and cheese curds on french fries is a meal but, thankfully, we’ve crossed the border back to a country where we know that chili and shredded cheese on french fries is a meal. Civilization.
Quite honestly, we might be in love with Canada. We’re definitely making another trip up there. For now, it’s about to MPH not KPH.
The Float Tour Blog – Issue #17
We hosted our second Float Tour Workshop here in Toronto and stayed in town a bit longer than we normally do, allowing us to get acquainted with the city. The sprawling metropolis is an amalgamation of old world pioneering days and modern multiculturalism. It was founded in 1787, and some of the currently standing buildings pre-date even that. Ancient architecture stands next to contemporary monoliths, weaving a tapestry of antiquity and avant-garde in this fair city.
