Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

What type of float tank should you get? Is one objectively better than others? How would you know? Graham and Ashkahn put their opinions out there on the debate.

Show Resources

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: Today’s question is three words: “pods versus cabins?” Question mark at the end.

Ashkahn: Oh. Did it say three words in the question? Or you added that?

Graham: No, I added that.

Ashkahn: It was an editorial sort of …

Graham: It was much more editorial side, yeah.

Ashkahn: Okay. I mean, it added a nice kind of dramatic effect to it.

Graham: Yeah, thanks. I’ve been trying to kind of play up these questions a little bit.

Ashkahn: Yeah, we should edit everybody’s questions.

Graham: All right, so pods versus cabins. I guess we can just turn this into pods versus cabins versus whatever the heck other type of open tanks.

Ashkahn: Different styles.

Graham: Different styles of float tank, yeah. I assume-

Ashkahn: Hold on.

Graham: Yeah?

Ashkahn: Let’s maybe break down some of the vocabulary of the different words for float tanks or pods or all that sort of stuff.

Graham: Yeah.

Ashkahn: Which is partially that there is no strict vocabulary.

Graham: That’s what I was gonna say. We tend to use “float tanks” here at Float Tank Solutions, just as the generic term for float tanks.

Ashkahn: Yeah.

Graham: So we use that interchangeably for everything.

Ashkahn: But you hear … people call them float tanks, float pods, float cabins, float rooms, float chambers.

Graham: Sensory deprivation tanks.

Ashkahn: Yeah. Sometimes people will say those words, and they’ll just mean whatever. They’re just calling the general concept whatever the word they prefer. Then when you actually kind of look at the different sizes and stuff like that, I usually call them, I guess … tanks and pods I usually pit in the same category myself. Other people usually distinguish those between kind of their shape. But to me, it’s like low ceiling, high ceiling, totally open room are like the three categories I kind of piece them into in my mind.

Graham: Yeah, for sure. Honestly, different manufacturers will even call their units different names.

Ashkahn: Yeah.

Graham: So not only is there not an industry name for it. If you go out looking for all of the float cabins, for example, some of them might be called rooms, some still might just be called float tanks that are like tall-style float tanks.

Ashkahn: And then there’s like the Wave that is a cabin on one end and a tank on the other end. It’s pretty hard to actually firmly categorize these things.

Graham: Yeah, so don’t expect any kind of consistency in naming, I guess, when you’re going out there looking. But like Ashkahn said, I also think that there’s this smaller, lay-down-inside-it, smaller self-contained style.

Ashkahn: Like it’s the style you wouldn’t be able to fully stand up in.

Graham: Yeah. Then ones where you can stand up and ones that are just totally open and built-in.


Ashkahn:
Yeah, like built into the room itself. The walls of your float tank are-

Graham: Are the walls of the room.

Ashkahn: Yeah.

Graham: All right. That said, I guess the question really is what one should I get? There’s just a question mark at the end, so I assume it’s like, what do you guys prefer? Something like that.

Ashkahn: This is a place where a lot of people have a lot of opinions. It’s a question we get a ton from people who are opening up.

Graham: Yeah.

Ashkahn: The nice thing is at our center, we have a variety and have had a variety, so we’ve kind of gotten to experience any category you can imagine. Open rooms, cabins, pods, tanks. We’ve had a slew of different types in our center. It’s interesting.

I would say, at the end of the day, ultimately I don’t think it makes as much of a difference as people think. A lot of people think it’s almost like a make or break decision for their business, in terms of what style they’re getting.

Graham: Right. We’ve seen so many businesses out there that are killing it with all old Samadhi tanks or Oasis tanks or something on the smaller side. And people out there who are killing it with really big rooms that are six feet wide and you can stand up fully inside them. Liners, no liners.

And for those of you who have actually experienced floating in a bunch of different units, you know as well, the experience inside is more similar than it is different for all of these different float tanks.

Ashkahn: Right.

Graham: I guess is just our term for it.

Ashkahn: It’s dark. It’s quiet. The actual amount of space inside that you’re floating … I mean, some of them are bigger than others, but it ends up not being that crazy of a difference.

Graham: I would honestly say that having the variety of tanks for me is more important than what that variety is. I really enjoy having a couple different types of units that we can shuffle people between.

Ashkahn: Yeah. Here’s kind of been my experience with our center is I feel like, if it’s someone’s first time, not always, but sometimes they’ll tend to look at the bigger units. They just seem slightly less intimidating, if you’ve never floated before. But that could also be because we have a variety, and they can actually look at one room and see a smaller one, look in another room and see a bigger one and be like, “Oh, I want to be in the bigger one.” You might not get that effect if people don’t have anything to compare it to when they’re coming into your shop.

But I’ll notice that people will gravitate towards cabin-style or open room-style a little bit more. Not everybody. Some people will see the more pod-like ones and be like, “Oh yeah, I’m getting in that thing.”

Graham: It is true. I think that our members end up floating more regularly in our smaller tanks than our first-timers.

Ashkahn: Yeah, that’s just the first time. Then once people float that first time, after that, I find it to be all over the place. People just tend to gravitate towards the different styles for their own reasons. I’d say a lot of people just don’t care after that. They float, and they realize that the shape and size and what it looks like is not of the most importance. When they book with us in the future, they won’t really care what float tank they end up in.

Or other ones, they just really like that more cocoon-like feeling in the pod versions, or they like being able to stand up as they get in and out. Sometimes they find some other feature of that specific float tank or that model. Maybe like it just holds temperature in a certain way that’s a little bit better, and they prefer it for that reason, rather than the size or the shape or any of that other stuff.

Graham: Yeah, and there really are people who just end up having their favorite tanks.

Ashkahn: Right.

Graham: Lots of times that has nothing to do with the tank itself. It’s more the experience they’d had inside there. It was like the first float, where they really broke through or kind of had crazy visuals, and now that’s their tank for sure. Every time they come back in, room three or room four.

Ashkahn: Even at the point where rooms three and four were exactly the same, I remember a customer who like only booked in room three, and I was like, “Oh, we have room four open.”

Graham: Do you want its twin next door?

Ashkahn: They’re like, “No, no, no.” Yeah. Once again, if you expected concrete answers on something like this from us, you’re looking in the wrong place. I do think that, once again, having a variety of units as opposed to a singular one is really nice. You can do cool things too, like if someone has a bad experience in a big, open pool, you can kind of say, “Oh, well, maybe you’d like something that’s a little more womb-like or something a little more contained.”

Graham: Yeah.

Ashkahn: Kind of shift them over and vice versa. If they had a bad experience in the other one-

Graham: If we’re talking about variety, maybe a slightly different topic, but we should at least point out the downsides of variety too, which is that from operations, it can make your life more difficult. It’s basically that many more tanks that you need to have an understanding of. You need to know how the controls work. You need to know how the filtration systems work. You need to have a bunch of extra spare parts for all the different versions of everything that could go wrong and all that sort of stuff. It adds complexity to your business.

But I would say we get compliments on it as a center. People seem to like coming in and seeing that there’s a number of tanks to choose between.

Ashkahn: Yeah, basically it’s cooler for the customer, and I think gives them a reason to come back in, if they might not otherwise. If they had a bad experience in one style, there’s kind of this incentive to come try another style. It sucks on the back end. So it’s just a decision to make your life harder, so that your customers are a little happier.

Graham: Yeah, I guess, really at the end of the day, I would say I don’t think the difference in aesthetics or size of the float tanks matter as much as people think they do. I think you can run a successful business with any of them. I think the differences are how many customers you’re gonna gain or lose or whatever. Based off of that idea of the shape and size of your float tank is not quite as pronounced or significant as people think it is before they go to open their centers.

Ashkahn: Yeah, I would agree with that. So there you have it. A little more than three words for your answer. If you have any of your own questions and want to send them in, go to floattanksolutions.com/podcast.

Recent Podcast Episodes

Should I Wire my Float Tanks into the Wall? – DSP 265

Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.

On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them. 

Can I Keep My Old Ceiling With My Buildout? – DSP 264

Hopefully everyone had a lovely time at the Friday Activities and the after-party.

Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!

Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling. 

What to Expect When Expanding from 1 to 3 Tanks? – DSP 263

Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily. 

Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags? 

Fortunately, these guys know the score and are happy to share. 

All About Floor Drains – DSP 262

As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast. 

Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider. 

How to Deal with Float Room Humidity – DSP 261

Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference. 

Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand. 

Latest Blog Posts

The Float Tour Blog – Issue #24

The Float Tour Blog – Issue #24

Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.

Don’t Mess With Alberta!

At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.

The Float Tour Blog – Issue #23

The Float Tour Blog – Issue #23

After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.

The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.

It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.

The Float Tour Blog – Issue #22

The Float Tour Blog – Issue #22

We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.

After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.

After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.

The Float Tour Blog – Issue #21

The Float Tour Blog – Issue #21

Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.