Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn share their expert opinion on… bubbles.
Not just any bubbles, but the ones that you sometimes find in a tank while you’re floating. What causes that?
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Our question for today is: “lately, I’ve noticed small bubbles tickling me during my floats. They also seem to be forming on the floor of the tank. What is going on?”
Ashkahn: What is going on, huh?
Graham: Alright, well, “Bubbly in the U.S.” We’ve got a solution for you.
Ashkahn: We sure do. It sounds, to me, like you’re using hydrogen peroxide.
Graham: If I were to guess, I would say the same thing. Or, you’ve got an aerator hooked in to the bottom of your tank.
Ashkahn: Yeah. Which I suspect, it’s not the second one.
Graham: I’ve never seen that ever in my life before.
Ashkahn: Are you in a jacuzzi and not a float tank? Is that what’s going on here? Basically, hydrogen peroxide breaks down into oxygen and water when it’s reacting with stuff. If you have a lot of hydrogen peroxide in your float tank, you might start being able to actually notice those … the air being created from that breakdown process of the peroxide. That’s, basically, what you’re feeling. You’re feeling tiny, air bubbles from the hydrogen peroxide.
Graham: And, for us, we end up getting that effect in our float tanks when we get above or around 100 parts per million.
Ashkahn: Yeah, somewhere in that … like 100, 110. That’s the range where we start to notice the bubble issue.
Graham: That’s as measure by the old Taylor Drop Test Kit, K-1826.
Ashkahn: Which, has been verified to be accurate in float tank water.
Graham: Which, you can look up. Taylor Labs actually tested our float water after we harassed them for a long time. You might find that those parts per million are different if you’re using test strips, or something else. Also, if you are, I highly recommend switching over to the old K-1826.
Ashkahn: Basically, that. Just don’t put your peroxide to those levels. Drop lower than that, and you won’t see those bubbles.
Graham: And that said, I still, occasionally, get bubbles, even when we’re within regular hydrogen peroxide levels. But, it’s not bubbles tickling your back, I’ll just, occasionally, feel them forming on my back, or something came up and I just have one bubble that’s caught and tickling me. I don’t think that’s even that out of the ordinary.
Ashkahn: It’s way more subtle. This is almost continuous while you’re floating. You’re feeling these things, if your levels are too high.
Graham: If you bring it up to 400, 500 parts per million, accidentally, one of your staff drops way too much in there … sometimes, you can actually even see the bubbling in the water itself, visually, which is kind of interesting. Looks like little cauldron brew, or something, in there.
Ashkahn: So, don’t do that.
Graham: Another question, “Is that unsafe?” Are the bubbles a sign that your skin is being eaten by the hydrogen peroxide, or anything crazy like that?
Ashkahn: Not really, that I know of. The other thing that can happen with these levels of peroxide is, you can, very slightly, start to bleach people’s hair, which is another issue. Those are the main reasons people don’t want to go above these 100 limits. I don’t really know, I can’t really speak authoritatively on this, but, people are buying three percent hydrogen peroxide in those brown bottles from the grocery store and gargling with them, and putting them on wounds. Three percent is 30 thousand parts per million, is what that is. I think, even the highest thing I’ve heard tested was 1000 parts per million, and that didn’t seem to do damage to people. But again, don’t take my word for it. It, at least, seems anecdotally out there. It’s not like 100 is a danger zone when these bubbles are forming. I have not heard anything about that actually being a point where this would be harmful to your skin or even if you got it in your eyes, necessarily.
Graham: No real damage that we’ve been able to assess anywhere. As far as we can tell, this is actually the most negative byproduct you get, is, little bubbles and bleaching of the hair.
Ashkahn: Yeah, around that range. That’s why most people stop there. There’s not really … also, as far as I can tell, doesn’t seem like you get a huge benefit from having hydrogen peroxide levels much higher than that. Seems like their ability to oxidize and do the things that they’re doing peter off around 40, 50, 60 parts per million, something like that. You’re not getting a huge bang for your buck by dumping a ton of peroxide into the water.
Graham: Is there anything else that we think is likely to be causing bubbles in someone’s tank? I was trying to think of that while we were talking, and thinking and talking is hard. I decided to do one at a time.
Ashkahn: The bubbles, tiny bubbles, as you’re floating, or something like that, is almost always hydrogen peroxide. The other thing that can cause bubbles is a small leak in your filtration system, right? If you have a pinhole leak in your union. Then when you run your filtration system. Or if your water levels are too low, and your filtration system is sucking air in as you run it … But, that’s real obvious. You run your filtration system, all of a sudden, your whole float tank’s cloudy. It’s been chopped up like a blender, and it gets sent back in. That dissipates pretty quickly, too.
Graham: That’s a problem at the beginning of the float, but not something that would be ongoing. They even say, “small bubbles.”
Ashkahn: Visually, those are so different. Tiny bubbles that are persistent in the water during your float, versus, your whole float tank turns cloudy white for 10 minutes.
Graham: Alright. So, answered?
Ashkahn: I guess so.
Graham: Alright. And that’s our solution for today.
Ashkahn: We’ll talk to you tomorrow.
Graham: Thanks, everyone.
Recent Podcast Episodes
Staff Doing Tasks Differently – DSP 349
If you run a business, one of the benefits is that it’s run exactly the way you want it, right? If the “millennials” that you hire don’t do the job exactly the way you want, they’re wrong, right?
Well, maybe. It could just be that the people on the ground doing the day to day operations have their own ideas about what works best. Efficiency is a big deal when running a float center and if there’s something that takes 20 seconds longer per room, that could be the difference between a late float and an on time one.
Ashkahn and Graham share their perspective on how best to manage employees who have different ways of operating their shop and how the standards were formed at Float On.
Dealing with Entrepreneurial Dread – DSP 348
Opening a float center is stressful, and when you first get started, there’s a lot of uncertainty involved. Will people keep coming in to floating from one month to the next? Will it be enough to cover costs? What happens if surprise expenses rise up and throw your center underwater.
Graham and Ashkahn discuss the existential dread involve in being a small business owner and what they do to not worry so much about the future of Float On. And also self-immolation.
Leasing Float Tanks – DSP 347
Recently, the float community has been introduced to some companies willing to lease float tanks for businesses. These are usually different from manufacturers and come with a small fee associated with it.
Graham and Ashkahn discuss the issues to consider when looking at these companies and in what situations they might be a viable alternative to purchasing tanks outright.
Expected Capacity for a New Center – DSP 346
If you’re opening a new center and trying to anticipate your business, what’s a reasonable amount of paying customers to expect? What about total capacity including free floats?
Graham and Ashkahn dominate the mic to drop some knowledge on the float family regarding what to expect.
What’s the Most Time Consuming Thing? – DSP 345
Graham and Ashkahn share what they think is the most time consuming part of running a float center. And then next most time consuming things, as well. A great episode outlining the realistic challenges in taking on management of a business.
Latest Blog Posts
Why we’re Excited for the 2018 Float Conference!
It’s Float On’s final year hosting the Float Conference this year. The wails from all our floaty friends can be heard throughout the galaxy as we mourn the end of an era. But, please, dry your eyes, float industry, because this year is going to be amazing.
There’s absolutely no way we’re not going out with a bang, so buckle up and buy your tickets. We’re planning on making this the best Float Conference yet! We have fresh speakers, amazing activities, new podcasts, and a very full schedule. Everything is going to be bigger and better and the parties are going to be off the hook!
Here’s a little bit from some of us putting this event together about what we’re excited about this year.
The Daily Solutions Podcast – Our Top 5 Episodes from June
So, I know that I complain every month about how difficult it is to pick the top 5 each month, but this month it was easy. June was filled with excellent episodes, but there’s a handful of special ones that were just a bit more awesome than the rest (we also blatantly...
Take Part in the 2018 Float Industry Report
We’re gathering responses for our 2018 Industry Report through the end of June, and we once again need your help.
Please take a brief moment to answer a few questions about your float center (or future float center) – it may be the easiest thing you can do to contribute to the growth of floatation around the world.
The Daily Solutions Podcast – Our Top 5 Episodes from May
The seasons are changing now. It’s hard to believe it’s already June, but it certainly is welcome. The weather’s warm, birds are chirping, plants are pollinating, and we have another list of Top 5 episodes of the Daily Solutions Podcast. There really are some amazing...