Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn share their expert opinion on… bubbles.
Not just any bubbles, but the ones that you sometimes find in a tank while you’re floating. What causes that?
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Our question for today is: “lately, I’ve noticed small bubbles tickling me during my floats. They also seem to be forming on the floor of the tank. What is going on?”
Ashkahn: What is going on, huh?
Graham: Alright, well, “Bubbly in the U.S.” We’ve got a solution for you.
Ashkahn: We sure do. It sounds, to me, like you’re using hydrogen peroxide.
Graham: If I were to guess, I would say the same thing. Or, you’ve got an aerator hooked in to the bottom of your tank.
Ashkahn: Yeah. Which I suspect, it’s not the second one.
Graham: I’ve never seen that ever in my life before.
Ashkahn: Are you in a jacuzzi and not a float tank? Is that what’s going on here? Basically, hydrogen peroxide breaks down into oxygen and water when it’s reacting with stuff. If you have a lot of hydrogen peroxide in your float tank, you might start being able to actually notice those … the air being created from that breakdown process of the peroxide. That’s, basically, what you’re feeling. You’re feeling tiny, air bubbles from the hydrogen peroxide.
Graham: And, for us, we end up getting that effect in our float tanks when we get above or around 100 parts per million.
Ashkahn: Yeah, somewhere in that … like 100, 110. That’s the range where we start to notice the bubble issue.
Graham: That’s as measure by the old Taylor Drop Test Kit, K-1826.
Ashkahn: Which, has been verified to be accurate in float tank water.
Graham: Which, you can look up. Taylor Labs actually tested our float water after we harassed them for a long time. You might find that those parts per million are different if you’re using test strips, or something else. Also, if you are, I highly recommend switching over to the old K-1826.
Ashkahn: Basically, that. Just don’t put your peroxide to those levels. Drop lower than that, and you won’t see those bubbles.
Graham: And that said, I still, occasionally, get bubbles, even when we’re within regular hydrogen peroxide levels. But, it’s not bubbles tickling your back, I’ll just, occasionally, feel them forming on my back, or something came up and I just have one bubble that’s caught and tickling me. I don’t think that’s even that out of the ordinary.
Ashkahn: It’s way more subtle. This is almost continuous while you’re floating. You’re feeling these things, if your levels are too high.
Graham: If you bring it up to 400, 500 parts per million, accidentally, one of your staff drops way too much in there … sometimes, you can actually even see the bubbling in the water itself, visually, which is kind of interesting. Looks like little cauldron brew, or something, in there.
Ashkahn: So, don’t do that.
Graham: Another question, “Is that unsafe?” Are the bubbles a sign that your skin is being eaten by the hydrogen peroxide, or anything crazy like that?
Ashkahn: Not really, that I know of. The other thing that can happen with these levels of peroxide is, you can, very slightly, start to bleach people’s hair, which is another issue. Those are the main reasons people don’t want to go above these 100 limits. I don’t really know, I can’t really speak authoritatively on this, but, people are buying three percent hydrogen peroxide in those brown bottles from the grocery store and gargling with them, and putting them on wounds. Three percent is 30 thousand parts per million, is what that is. I think, even the highest thing I’ve heard tested was 1000 parts per million, and that didn’t seem to do damage to people. But again, don’t take my word for it. It, at least, seems anecdotally out there. It’s not like 100 is a danger zone when these bubbles are forming. I have not heard anything about that actually being a point where this would be harmful to your skin or even if you got it in your eyes, necessarily.
Graham: No real damage that we’ve been able to assess anywhere. As far as we can tell, this is actually the most negative byproduct you get, is, little bubbles and bleaching of the hair.
Ashkahn: Yeah, around that range. That’s why most people stop there. There’s not really … also, as far as I can tell, doesn’t seem like you get a huge benefit from having hydrogen peroxide levels much higher than that. Seems like their ability to oxidize and do the things that they’re doing peter off around 40, 50, 60 parts per million, something like that. You’re not getting a huge bang for your buck by dumping a ton of peroxide into the water.
Graham: Is there anything else that we think is likely to be causing bubbles in someone’s tank? I was trying to think of that while we were talking, and thinking and talking is hard. I decided to do one at a time.
Ashkahn: The bubbles, tiny bubbles, as you’re floating, or something like that, is almost always hydrogen peroxide. The other thing that can cause bubbles is a small leak in your filtration system, right? If you have a pinhole leak in your union. Then when you run your filtration system. Or if your water levels are too low, and your filtration system is sucking air in as you run it … But, that’s real obvious. You run your filtration system, all of a sudden, your whole float tank’s cloudy. It’s been chopped up like a blender, and it gets sent back in. That dissipates pretty quickly, too.
Graham: That’s a problem at the beginning of the float, but not something that would be ongoing. They even say, “small bubbles.”
Ashkahn: Visually, those are so different. Tiny bubbles that are persistent in the water during your float, versus, your whole float tank turns cloudy white for 10 minutes.
Graham: Alright. So, answered?
Ashkahn: I guess so.
Graham: Alright. And that’s our solution for today.
Ashkahn: We’ll talk to you tomorrow.
Graham: Thanks, everyone.
Recent Podcast Episodes
How do you Start Opening a Float Center? – DSP 285
For people just starting out, it can seem really daunting to start a float center. They may not even know where to begin.
Graham and Ashkahn tackle this idea head on. The most important thing is to do a lot of research (definitely check the resources) and to make sure you have people that you can call and refer to for support when you need it.
What to do When Floaters Interrupt Intros? – DSP 284
Ashkahn’s back and on form. He and Graham take on the question of how to handle first time floaters interrupt the pre-float intros explaining the process.
There’s a lot of information that first time floaters need, and if they aren’t paying attention, it can cause messy floats or unnecessary difficulty or confusion. The reunited duo provides some great tips while going over different customer scenarios.
When is the Best Time to Open a Float Center? – DSP 283
Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.
Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.
Tips for Choosing Contractors – DSP 282
Graham the Lone Podcaster takes the reigns on answering how to pick a contractor for float center build out.
It’s the kind of big decision that every float center owner hopes to only make once, so getting as much information ahead of time is extremely useful. Graham breaks down some useful tips and explains how to ask for a bid, specific skill sets to look for, and general advice on knowing when to walk away.
Starting your Pumps Early – DSP 281
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Latest Blog Posts
4,937 Things to Know About Buying a Used Float Tank
You’re thinking about buying a used float tank. Whether this is for a new center, an addition to an existing operation, or a purchase for your home, this is a big decision.
We’ve compiled together some of the major questions and considerations to entertain before making a purchase. While you do have the opportunity to save some money and snag a good deal, there can be hidden costs and unknowns to weigh against those savings.
Offering Overnight Floats
Almost three years ago, we discussed the merits of running overnight floats from an employee’s perspective, focusing on the opportunities of this unique experience as well as its challenges. We’d like to take a deeper dive into this issue because, while the majority of floaters come through our tanks during “normal” business hours, overnight floats form an important part of not only Float On’s identity, but also its business structure and broader culture.
How to Talk About Floating
You step into the elevator and shuffle to the side to make room for the kind-eyed, old woman with the miniature poodle.
“Good morning,” you say with a smile.
“Good morning,” she beams back, her gaze resting briefly on your water bottle with the logo from your float center’s annual party.
After a brief pause, she asks, “What is Float-a-Palooza?”
You take a breath, smile, and launch into your literal elevator pitch.
So, what do you say?
Employee Handbook Template
Whether you are a small or large float center, you most likely have other employees working for you. Regardless of the size of your staff, for reasons of efficiency and legality, it’s essential that your organization has clear and straightforward policies and guidelines. No matter how good employee communication is, it’s always safest and cleanest to have clear parameters and expectations written down.
This is why Float Tank Solutions has created a customizable Employee Handbook Template. Free for anyone to download, it contains federally compliant language (current as of October 2016) and contains a multitude of sections, from employee benefits and compensation descriptions to job guidelines and discrimination policies.
