Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn share their expert opinion on… bubbles.
Not just any bubbles, but the ones that you sometimes find in a tank while you’re floating. What causes that?
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Our question for today is: “lately, I’ve noticed small bubbles tickling me during my floats. They also seem to be forming on the floor of the tank. What is going on?”
Ashkahn: What is going on, huh?
Graham: Alright, well, “Bubbly in the U.S.” We’ve got a solution for you.
Ashkahn: We sure do. It sounds, to me, like you’re using hydrogen peroxide.
Graham: If I were to guess, I would say the same thing. Or, you’ve got an aerator hooked in to the bottom of your tank.
Ashkahn: Yeah. Which I suspect, it’s not the second one.
Graham: I’ve never seen that ever in my life before.
Ashkahn: Are you in a jacuzzi and not a float tank? Is that what’s going on here? Basically, hydrogen peroxide breaks down into oxygen and water when it’s reacting with stuff. If you have a lot of hydrogen peroxide in your float tank, you might start being able to actually notice those … the air being created from that breakdown process of the peroxide. That’s, basically, what you’re feeling. You’re feeling tiny, air bubbles from the hydrogen peroxide.
Graham: And, for us, we end up getting that effect in our float tanks when we get above or around 100 parts per million.
Ashkahn: Yeah, somewhere in that … like 100, 110. That’s the range where we start to notice the bubble issue.
Graham: That’s as measure by the old Taylor Drop Test Kit, K-1826.
Ashkahn: Which, has been verified to be accurate in float tank water.
Graham: Which, you can look up. Taylor Labs actually tested our float water after we harassed them for a long time. You might find that those parts per million are different if you’re using test strips, or something else. Also, if you are, I highly recommend switching over to the old K-1826.
Ashkahn: Basically, that. Just don’t put your peroxide to those levels. Drop lower than that, and you won’t see those bubbles.
Graham: And that said, I still, occasionally, get bubbles, even when we’re within regular hydrogen peroxide levels. But, it’s not bubbles tickling your back, I’ll just, occasionally, feel them forming on my back, or something came up and I just have one bubble that’s caught and tickling me. I don’t think that’s even that out of the ordinary.
Ashkahn: It’s way more subtle. This is almost continuous while you’re floating. You’re feeling these things, if your levels are too high.
Graham: If you bring it up to 400, 500 parts per million, accidentally, one of your staff drops way too much in there … sometimes, you can actually even see the bubbling in the water itself, visually, which is kind of interesting. Looks like little cauldron brew, or something, in there.
Ashkahn: So, don’t do that.
Graham: Another question, “Is that unsafe?” Are the bubbles a sign that your skin is being eaten by the hydrogen peroxide, or anything crazy like that?
Ashkahn: Not really, that I know of. The other thing that can happen with these levels of peroxide is, you can, very slightly, start to bleach people’s hair, which is another issue. Those are the main reasons people don’t want to go above these 100 limits. I don’t really know, I can’t really speak authoritatively on this, but, people are buying three percent hydrogen peroxide in those brown bottles from the grocery store and gargling with them, and putting them on wounds. Three percent is 30 thousand parts per million, is what that is. I think, even the highest thing I’ve heard tested was 1000 parts per million, and that didn’t seem to do damage to people. But again, don’t take my word for it. It, at least, seems anecdotally out there. It’s not like 100 is a danger zone when these bubbles are forming. I have not heard anything about that actually being a point where this would be harmful to your skin or even if you got it in your eyes, necessarily.
Graham: No real damage that we’ve been able to assess anywhere. As far as we can tell, this is actually the most negative byproduct you get, is, little bubbles and bleaching of the hair.
Ashkahn: Yeah, around that range. That’s why most people stop there. There’s not really … also, as far as I can tell, doesn’t seem like you get a huge benefit from having hydrogen peroxide levels much higher than that. Seems like their ability to oxidize and do the things that they’re doing peter off around 40, 50, 60 parts per million, something like that. You’re not getting a huge bang for your buck by dumping a ton of peroxide into the water.
Graham: Is there anything else that we think is likely to be causing bubbles in someone’s tank? I was trying to think of that while we were talking, and thinking and talking is hard. I decided to do one at a time.
Ashkahn: The bubbles, tiny bubbles, as you’re floating, or something like that, is almost always hydrogen peroxide. The other thing that can cause bubbles is a small leak in your filtration system, right? If you have a pinhole leak in your union. Then when you run your filtration system. Or if your water levels are too low, and your filtration system is sucking air in as you run it … But, that’s real obvious. You run your filtration system, all of a sudden, your whole float tank’s cloudy. It’s been chopped up like a blender, and it gets sent back in. That dissipates pretty quickly, too.
Graham: That’s a problem at the beginning of the float, but not something that would be ongoing. They even say, “small bubbles.”
Ashkahn: Visually, those are so different. Tiny bubbles that are persistent in the water during your float, versus, your whole float tank turns cloudy white for 10 minutes.
Graham: Alright. So, answered?
Ashkahn: I guess so.
Graham: Alright. And that’s our solution for today.
Ashkahn: We’ll talk to you tomorrow.
Graham: Thanks, everyone.
Recent Podcast Episodes
When is it Time to Open a Second Float Center? – DSP 115
Okay, so… Float On only has one location (not counting Float On Hong Kong) and there’s certainly a reason for that. Graham and Ashkahn have toyed with the idea of opening up another center multiple times throughout the years but something else always came up. As they’ve met more people in the industry, they’ve seen some of the pitfalls and successes from people opening additional locations, franchises and whatever else. They share their thoughts on when they think it’d be best to open and why they say to wait a little bit.
Choosing the Hours to Staff Your Float Center – DSP 114
How do you figure out how many people to hire? What’s the ideal hours for a float employee to work? Is there such a thing as too many hours? Too few?
Graham and Ashkahn share their insights with staffing Float On and what their staff looks like to cover all their shifts running a six tank, 24 hour float center.
Tips for Creating an Inviting Float Center Lobby – DSP 113
Not all of us are interior designers, but we all want to have a space that is welcoming to our customers.
Graham and Ashkahn definitely have an eye for this, especially after visiting so many float centers. They share some of their favorite designs they’ve seen, as well as common tactics to help make your center comfy and inviting without necessarily breaking the bank on furniture. They also share some of their pipe dreams for their ideal designs that never came to be.
The Weight of a Gallon of Saltwater – DSP 112
When Graham and Ashkahn get to definitively answer a question, it’s like Christmas. Birds sing and the guys bust out their “Answering a question definitively” dance, which has the added side effect of better crop yields during the coming harvest. It’s an exciting time.
There’s a very straightforward mathematical equation for measuring the weight of salt water based on specific gravity, which is excellent. And useful!
Also, whoever wrote this question needs to contact Graham and Ashkahn ASAP!
Tips on Structuring Your Service Menu – DSP 111
There’s a lot of nuance to how you structure your service menu that can have a significant impact on how your customers spend their money. The size of prices, how they’re ordered or arranged, what price you put first on the menu, etc. all make a difference. Given all these small details, it can seem daunting and make some business owners unsure of where to start or who’s advice to take.
Fortunately, Graham and Ashkahn have been at this for a long time and really dig marketing psychology, so they have lots of advice, tips and even some of the psychology behind why we do the things we do.
Latest Blog Posts
Slowing Down, Letting Go, and Stepping Up to iFloat
My intention for this first blog post is to give you some background into my life, and how and why I ended up running a float center, and teaching courses about metaprogramming in float centers. For as far back as I can remember, I have been fascinated with exploring...
We’ll All Float On
This is the introduction that I wrote for the Portland Float Conference program. I wanted to repost it here, so that all of my zany predictions for the future of floating could be recorded for all time. It also seemed like a good piece to kick off this month's topic...
The First Post (in which the nature of the project is revealed)
There is not enough content out there about float tanks. There is certainly not enough for those of us that are actively running, or trying to start, a center. Float Tank Solutions was launched in an attempt to crush this problem. We've already put up a good amount of...
