Something in the world of floating have you stumped?
Show Highlights
In this episode, Graham and Ashkahn share their expert opinion on… bubbles.
Not just any bubbles, but the ones that you sometimes find in a tank while you’re floating. What causes that?
Show Resources
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Our question for today is: “lately, I’ve noticed small bubbles tickling me during my floats. They also seem to be forming on the floor of the tank. What is going on?”
Ashkahn: What is going on, huh?
Graham: Alright, well, “Bubbly in the U.S.” We’ve got a solution for you.
Ashkahn: We sure do. It sounds, to me, like you’re using hydrogen peroxide.
Graham: If I were to guess, I would say the same thing. Or, you’ve got an aerator hooked in to the bottom of your tank.
Ashkahn: Yeah. Which I suspect, it’s not the second one.
Graham: I’ve never seen that ever in my life before.
Ashkahn: Are you in a jacuzzi and not a float tank? Is that what’s going on here? Basically, hydrogen peroxide breaks down into oxygen and water when it’s reacting with stuff. If you have a lot of hydrogen peroxide in your float tank, you might start being able to actually notice those … the air being created from that breakdown process of the peroxide. That’s, basically, what you’re feeling. You’re feeling tiny, air bubbles from the hydrogen peroxide.
Graham: And, for us, we end up getting that effect in our float tanks when we get above or around 100 parts per million.
Ashkahn: Yeah, somewhere in that … like 100, 110. That’s the range where we start to notice the bubble issue.
Graham: That’s as measure by the old Taylor Drop Test Kit, K-1826.
Ashkahn: Which, has been verified to be accurate in float tank water.
Graham: Which, you can look up. Taylor Labs actually tested our float water after we harassed them for a long time. You might find that those parts per million are different if you’re using test strips, or something else. Also, if you are, I highly recommend switching over to the old K-1826.
Ashkahn: Basically, that. Just don’t put your peroxide to those levels. Drop lower than that, and you won’t see those bubbles.
Graham: And that said, I still, occasionally, get bubbles, even when we’re within regular hydrogen peroxide levels. But, it’s not bubbles tickling your back, I’ll just, occasionally, feel them forming on my back, or something came up and I just have one bubble that’s caught and tickling me. I don’t think that’s even that out of the ordinary.
Ashkahn: It’s way more subtle. This is almost continuous while you’re floating. You’re feeling these things, if your levels are too high.
Graham: If you bring it up to 400, 500 parts per million, accidentally, one of your staff drops way too much in there … sometimes, you can actually even see the bubbling in the water itself, visually, which is kind of interesting. Looks like little cauldron brew, or something, in there.
Ashkahn: So, don’t do that.
Graham: Another question, “Is that unsafe?” Are the bubbles a sign that your skin is being eaten by the hydrogen peroxide, or anything crazy like that?
Ashkahn: Not really, that I know of. The other thing that can happen with these levels of peroxide is, you can, very slightly, start to bleach people’s hair, which is another issue. Those are the main reasons people don’t want to go above these 100 limits. I don’t really know, I can’t really speak authoritatively on this, but, people are buying three percent hydrogen peroxide in those brown bottles from the grocery store and gargling with them, and putting them on wounds. Three percent is 30 thousand parts per million, is what that is. I think, even the highest thing I’ve heard tested was 1000 parts per million, and that didn’t seem to do damage to people. But again, don’t take my word for it. It, at least, seems anecdotally out there. It’s not like 100 is a danger zone when these bubbles are forming. I have not heard anything about that actually being a point where this would be harmful to your skin or even if you got it in your eyes, necessarily.
Graham: No real damage that we’ve been able to assess anywhere. As far as we can tell, this is actually the most negative byproduct you get, is, little bubbles and bleaching of the hair.
Ashkahn: Yeah, around that range. That’s why most people stop there. There’s not really … also, as far as I can tell, doesn’t seem like you get a huge benefit from having hydrogen peroxide levels much higher than that. Seems like their ability to oxidize and do the things that they’re doing peter off around 40, 50, 60 parts per million, something like that. You’re not getting a huge bang for your buck by dumping a ton of peroxide into the water.
Graham: Is there anything else that we think is likely to be causing bubbles in someone’s tank? I was trying to think of that while we were talking, and thinking and talking is hard. I decided to do one at a time.
Ashkahn: The bubbles, tiny bubbles, as you’re floating, or something like that, is almost always hydrogen peroxide. The other thing that can cause bubbles is a small leak in your filtration system, right? If you have a pinhole leak in your union. Then when you run your filtration system. Or if your water levels are too low, and your filtration system is sucking air in as you run it … But, that’s real obvious. You run your filtration system, all of a sudden, your whole float tank’s cloudy. It’s been chopped up like a blender, and it gets sent back in. That dissipates pretty quickly, too.
Graham: That’s a problem at the beginning of the float, but not something that would be ongoing. They even say, “small bubbles.”
Ashkahn: Visually, those are so different. Tiny bubbles that are persistent in the water during your float, versus, your whole float tank turns cloudy white for 10 minutes.
Graham: Alright. So, answered?
Ashkahn: I guess so.
Graham: Alright. And that’s our solution for today.
Ashkahn: We’ll talk to you tomorrow.
Graham: Thanks, everyone.
Recent Podcast Episodes
Doing Float Center Construction Yourself – DSP 75
Construction and buildout are likely going to be some of the largest expenses for any float center. Possibly even more than the float tanks themselves in some situations. Most float center owners aren’t millionaires, and when faced with these large expenditures, it can be difficult to decide what to cut to keep your costs down. Doing your own construction can be an effective way to go about that, but with so much technical work needed to go into building a float center, is that really the right thing to do?
Graham and Ashkahn lay down some knowledge on this, having both worked on a lot of their buildout themselves initially, as well as hired out workers for repairs and upgrades.
Is print/TV/radio advertising dead? – DSP 74
Marketing is a big gamble for any industry. You have to invest in a strategy on a platform and just hope that it pays off. It’s certainly one of the most essential investments for your business, but how do you know what will work and what won’t? This problem seems especially aggravated for float centers. Whatever marketing you do needs to tell people more than just that you exist, it also needs to explain what floating is and why people need it. How do you overcome these hurdles? And are traditional mediums even viable?
How to reach out to wellness professionals – DSP 73
Getting together with other wellness businesses seems like a slam dunk for float centers. Or at least it should be. Floating seems to have a special sort of synergy with things like yoga, massage, acupuncture, or what have you, but that doesn’t always mean that other wellness practitioners are going to be your greatest advocates. How do you turn that acupuncturist across the street into your biggest advocate?
Graham and Ashkahn have tried it all and worked closely with tons of businesses in joint marketing ventures as well as referral programs. They share what has worked best for them, and some of the surprises they’ve found with stuff they thought would work that just totally didn’t.
How do you prioritize what to work on in your center? – DSP 72
It’s human nature to suck at planning. we can’t help having inefficient mental systems for establishing the importance of a project when we’re working on it. This problem can be especially bad for float centers too, given that certain projects, if not addressed quickly, can dramatically become exponentially worse, like with salt damage.
Graham and Ashkahn face these exact same problems when they undertake any project, but still manage to find ways to be productive. In this episode, they share some of their tips as well as personal philosophies on work. Plus, Ashkahn’s strong desire to have a waterslide.
What do you put in your email newsletter? – DSP 71
If you’re running a float center, you definitely have a newsletter. Right? If you don’t, then you should. Most businesses these days have them. Establishing a newsletter can be a daunting undertaking if you’re unfamiliar with the process. What goes in a newsletter? How frequent is too frequent to send it out? Who are you sending it to?
Graham and Ashkahn dole out some wisdom on the importance of this correspondence method. Give it a listen.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
