Something in the world of floating have you stumped?
Show Highlights
Some people swear by tests strips. Others don’t. What’s the right way to do it for float tanks? Luckily we have two people who have learned, in frustratingly specific detail, everything there is to know about testing float tank water and how.
Show Resources
FTS Blog – The Basics of Float Tank Sanitation
FTS Product – Intro to Water Treatment (Free)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “Why do some people swear by test strips and other people recommend against them?”
Ashkahn: Okay, so I guess, what is out there other than test strips.
Graham: Let’s say what a test strip is. That might be good. We’re talking about testing your water quality here, and a test strip is a little strip that has pads on the end with chemicals in them that you dip in there to get a reading.
Ashkahn: Yeah, they come in little bottles, usually, and on the back of the bottle is like…
Graham: Let’s talk about what a bottle is for a second.
Ashkahn: All right. It’s a container that you put stuff into. They have a color chart on the back of the bottle, so you dip it in the liquid and you pull it out and you compare the color to what it says on the bottle and that gives you your reading. They make test strips for pretty much everything, I guess, really: pH, alkalinity, chlorine, bromine.
Graham: Pregnancy.
Ashkahn: So yeah, there’s lots of test strips out there and they’re probably the most common thing people know about, just because it’s what people use if you have a pool at home or a hot tub at home or something. Like people in residential settings, that’s what they’re using. They’re kind of like the most straightforward thing you could have, right? It’s literally like dip this in, look at the color. So you see a lot of test strips out there and then you hear about people saying maybe you shouldn’t be using test strips.
Graham: Yeah, and the thought behind that is that it’s one of the most subjective ways to test your water quality or your water metrics, and subjective in the sense that once you dip it in the water and hold it out, you’re now gauging your visual acuity against the colors on these tabs and the color on the bottle.
And there’s a saying in the water aquatic health world of, “Oh, is your pH not high enough and you’re using a test strip? Just hold it out of the water for another couple of seconds. It’ll be fine,” which is it keeps changing color even after you take it out of the water. So there is this sense where if you’re not hitting it at the exact right time, in the exact right light, and your eyes are good, then there’s a lot of variability there.
Ashkahn: Also, often test strips are not as accurate just by themselves to begin with as some of these other things we’ll talk about in a second, so it’s kind of all those things combined make it for not being the most reliable thing. They’re not the most precise tools to begin with and then on top of that there’s a lot of subjectivity in terms of your color perception, the lighting in the room, things like that, and there’s some subjectivity in terms of how long you are waiting to actually decide, “Now I’m taking this reading.” So all those things put together make it a less certain testing regimen than some of the other stuff.
So what’s the other stuff? They have these other test kits that have often just bottles of these reagents, as they call them, that are just chemicals that do a lot of the same stuff. They change colors. A lot of this is about color changing. So you’ll take a sample of your water, for example, and squirt 10 drops of some bottle in there, it’ll turn the whole thing green and then you’ll put like five drops of something else in there and that’ll turn it a different color, and then you have to put 10 more drops, or you count how many drops it takes to turn the liquid back to clear. That’s like some ways that you see this.
Every test kit’s different and they have their own slightly different ways and colors and number of things you’re dropping in, but at the end of the day it’s a lot of that. You’re either getting to some sort of end point that’s a lot clearer than testing a color against something, and sometimes it is actually testing a color, right? Like some of these nicer test kits, you’ll put something in, then you’ll compare the color, the liquid turns to a color on the side of a bottle or something like that.
Graham: Especially I feel like I’ve seen that a lot with those ones where you crush the tablets into the water and wait for it to change color. So there’s still a little bit of visual checking in that case too.
Ashkahn: I mean, you hear the same complaints about those. The testing itself, I think, is more accurate to begin with, but it’s still has the same problem of human beings having imprecise color perception, especially relative to each other. Some people just see slightly different colors, or the color temperature in the room that you’re in can adjust for things like that. I mean, the newer stuff that you see coming out is kind of electronic devices that basically do that.
Graham: That also look at the color and compare it for you.
Ashkahn: They just look at the color. Yeah, they’re just better at looking at color.
Graham: You’re just using robot eyes instead of your own fallible human eyes.
Ashkahn: Yeah, and it’s pretty much when you hear about electronic testing systems, you often think they’re something that’s like sampling the water in some crazy electronic way, but often they’re just literally shooting a beam of light into water and then deciding the color on their own, which is better — it’s a more precise way, or at least a more reliable or consistent way of getting a reading from something than doing it yourself.
Graham: A little word of warning is that we’ve had just a ton of trouble getting anything that’s kind of robotic-driven like that, like a spectrometer, to read the float tanks, just because the density of the salt water affects the light beams going through it in a way that you don’t have for regular water.
Ashkahn: Perhaps that, or perhaps just the chemistry to begin with was not working correctly.
Graham: Yeah, who knows? We don’t actually know. It’s all conjecture.
Ashkahn: It wasn’t the colors they was expecting, yeah. So, I don’t know, you’ll hear different things out there too.
A lot of places won’t even allow you to use test strips in a commercial setting. They’ll require that you use some sort of actual reagent test kit, and then we hear of some places where test strips is what they recommend, but that’s way more seldom than we hear the other way that you have to use a test kit.
At the end of the day, probably something to factor in is whatever testing thing your health department is using, like if you have someone coming in and inspecting your float tank, I’d buy the exact same test kit the inspectors are coming in to test with. And more times than not, that’s one of these reagent test kits than it is a test strip sort of situation, for sure.
Graham: We could keep going forever on water testing stuff. It gets to be a very deep, deep, dark rabbit hole but, for now, hopefully, that’ll at least explain some of the difference between test strips and what some of the other devices are doing and why people maybe are a little more wary of test strips.
Again, even given the subjective nature of a lot of these tests, test strips do seem to be on that far end of subjectivity. There’s nothing more subjective than test strips other than just staring at your float tank solution.
Ashkahn: Just taking a guess.
Graham: Yeah, exactly. Going on your hunch.
So, thanks for tuning into today’s episode. And, as always, you can submit your own ideas and questions on our website at floattanksolutions.com/podcast.
Ashkahn: Thanks everybody.
Recent Podcast Episodes
How do you Start Opening a Float Center? – DSP 285
For people just starting out, it can seem really daunting to start a float center. They may not even know where to begin.
Graham and Ashkahn tackle this idea head on. The most important thing is to do a lot of research (definitely check the resources) and to make sure you have people that you can call and refer to for support when you need it.
What to do When Floaters Interrupt Intros? – DSP 284
Ashkahn’s back and on form. He and Graham take on the question of how to handle first time floaters interrupt the pre-float intros explaining the process.
There’s a lot of information that first time floaters need, and if they aren’t paying attention, it can cause messy floats or unnecessary difficulty or confusion. The reunited duo provides some great tips while going over different customer scenarios.
When is the Best Time to Open a Float Center? – DSP 283
Graham takes the helm again without any co-captain to steer the SS Daily Solutions through the rugged storms of float industry questions.
Today he answers a question about when the best time of year to open your float center. The important thing to remember is that, whenever you choose, you should plan for even earlier, as float centers are more likely to get delayed in construction.
Tips for Choosing Contractors – DSP 282
Graham the Lone Podcaster takes the reigns on answering how to pick a contractor for float center build out.
It’s the kind of big decision that every float center owner hopes to only make once, so getting as much information ahead of time is extremely useful. Graham breaks down some useful tips and explains how to ask for a bid, specific skill sets to look for, and general advice on knowing when to walk away.
Starting your Pumps Early – DSP 281
In this episode, Graham goes solo again to answer a particularly loquacious listener who sent in a question about how to logistically handle your changeover when a floater comes out early.
It can be tempting to start your changeover as soon as possible, especially if you have a few of them to get to, but Graham lays out some helpful things to remember before flipping that switch and running your pumps before the allotted time.
Latest Blog Posts
4,937 Things to Know About Buying a Used Float Tank
You’re thinking about buying a used float tank. Whether this is for a new center, an addition to an existing operation, or a purchase for your home, this is a big decision.
We’ve compiled together some of the major questions and considerations to entertain before making a purchase. While you do have the opportunity to save some money and snag a good deal, there can be hidden costs and unknowns to weigh against those savings.
Offering Overnight Floats
Almost three years ago, we discussed the merits of running overnight floats from an employee’s perspective, focusing on the opportunities of this unique experience as well as its challenges. We’d like to take a deeper dive into this issue because, while the majority of floaters come through our tanks during “normal” business hours, overnight floats form an important part of not only Float On’s identity, but also its business structure and broader culture.
How to Talk About Floating
You step into the elevator and shuffle to the side to make room for the kind-eyed, old woman with the miniature poodle.
“Good morning,” you say with a smile.
“Good morning,” she beams back, her gaze resting briefly on your water bottle with the logo from your float center’s annual party.
After a brief pause, she asks, “What is Float-a-Palooza?”
You take a breath, smile, and launch into your literal elevator pitch.
So, what do you say?
Employee Handbook Template
Whether you are a small or large float center, you most likely have other employees working for you. Regardless of the size of your staff, for reasons of efficiency and legality, it’s essential that your organization has clear and straightforward policies and guidelines. No matter how good employee communication is, it’s always safest and cleanest to have clear parameters and expectations written down.
This is why Float Tank Solutions has created a customizable Employee Handbook Template. Free for anyone to download, it contains federally compliant language (current as of October 2016) and contains a multitude of sections, from employee benefits and compensation descriptions to job guidelines and discrimination policies.
