Something in the world of floating have you stumped?
Show Highlights
Some people swear by tests strips. Others don’t. What’s the right way to do it for float tanks? Luckily we have two people who have learned, in frustratingly specific detail, everything there is to know about testing float tank water and how.
Show Resources
FTS Blog – The Basics of Float Tank Sanitation
FTS Product – Intro to Water Treatment (Free)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “Why do some people swear by test strips and other people recommend against them?”
Ashkahn: Okay, so I guess, what is out there other than test strips.
Graham: Let’s say what a test strip is. That might be good. We’re talking about testing your water quality here, and a test strip is a little strip that has pads on the end with chemicals in them that you dip in there to get a reading.
Ashkahn: Yeah, they come in little bottles, usually, and on the back of the bottle is like…
Graham: Let’s talk about what a bottle is for a second.
Ashkahn: All right. It’s a container that you put stuff into. They have a color chart on the back of the bottle, so you dip it in the liquid and you pull it out and you compare the color to what it says on the bottle and that gives you your reading. They make test strips for pretty much everything, I guess, really: pH, alkalinity, chlorine, bromine.
Graham: Pregnancy.
Ashkahn: So yeah, there’s lots of test strips out there and they’re probably the most common thing people know about, just because it’s what people use if you have a pool at home or a hot tub at home or something. Like people in residential settings, that’s what they’re using. They’re kind of like the most straightforward thing you could have, right? It’s literally like dip this in, look at the color. So you see a lot of test strips out there and then you hear about people saying maybe you shouldn’t be using test strips.
Graham: Yeah, and the thought behind that is that it’s one of the most subjective ways to test your water quality or your water metrics, and subjective in the sense that once you dip it in the water and hold it out, you’re now gauging your visual acuity against the colors on these tabs and the color on the bottle.
And there’s a saying in the water aquatic health world of, “Oh, is your pH not high enough and you’re using a test strip? Just hold it out of the water for another couple of seconds. It’ll be fine,” which is it keeps changing color even after you take it out of the water. So there is this sense where if you’re not hitting it at the exact right time, in the exact right light, and your eyes are good, then there’s a lot of variability there.
Ashkahn: Also, often test strips are not as accurate just by themselves to begin with as some of these other things we’ll talk about in a second, so it’s kind of all those things combined make it for not being the most reliable thing. They’re not the most precise tools to begin with and then on top of that there’s a lot of subjectivity in terms of your color perception, the lighting in the room, things like that, and there’s some subjectivity in terms of how long you are waiting to actually decide, “Now I’m taking this reading.” So all those things put together make it a less certain testing regimen than some of the other stuff.
So what’s the other stuff? They have these other test kits that have often just bottles of these reagents, as they call them, that are just chemicals that do a lot of the same stuff. They change colors. A lot of this is about color changing. So you’ll take a sample of your water, for example, and squirt 10 drops of some bottle in there, it’ll turn the whole thing green and then you’ll put like five drops of something else in there and that’ll turn it a different color, and then you have to put 10 more drops, or you count how many drops it takes to turn the liquid back to clear. That’s like some ways that you see this.
Every test kit’s different and they have their own slightly different ways and colors and number of things you’re dropping in, but at the end of the day it’s a lot of that. You’re either getting to some sort of end point that’s a lot clearer than testing a color against something, and sometimes it is actually testing a color, right? Like some of these nicer test kits, you’ll put something in, then you’ll compare the color, the liquid turns to a color on the side of a bottle or something like that.
Graham: Especially I feel like I’ve seen that a lot with those ones where you crush the tablets into the water and wait for it to change color. So there’s still a little bit of visual checking in that case too.
Ashkahn: I mean, you hear the same complaints about those. The testing itself, I think, is more accurate to begin with, but it’s still has the same problem of human beings having imprecise color perception, especially relative to each other. Some people just see slightly different colors, or the color temperature in the room that you’re in can adjust for things like that. I mean, the newer stuff that you see coming out is kind of electronic devices that basically do that.
Graham: That also look at the color and compare it for you.
Ashkahn: They just look at the color. Yeah, they’re just better at looking at color.
Graham: You’re just using robot eyes instead of your own fallible human eyes.
Ashkahn: Yeah, and it’s pretty much when you hear about electronic testing systems, you often think they’re something that’s like sampling the water in some crazy electronic way, but often they’re just literally shooting a beam of light into water and then deciding the color on their own, which is better — it’s a more precise way, or at least a more reliable or consistent way of getting a reading from something than doing it yourself.
Graham: A little word of warning is that we’ve had just a ton of trouble getting anything that’s kind of robotic-driven like that, like a spectrometer, to read the float tanks, just because the density of the salt water affects the light beams going through it in a way that you don’t have for regular water.
Ashkahn: Perhaps that, or perhaps just the chemistry to begin with was not working correctly.
Graham: Yeah, who knows? We don’t actually know. It’s all conjecture.
Ashkahn: It wasn’t the colors they was expecting, yeah. So, I don’t know, you’ll hear different things out there too.
A lot of places won’t even allow you to use test strips in a commercial setting. They’ll require that you use some sort of actual reagent test kit, and then we hear of some places where test strips is what they recommend, but that’s way more seldom than we hear the other way that you have to use a test kit.
At the end of the day, probably something to factor in is whatever testing thing your health department is using, like if you have someone coming in and inspecting your float tank, I’d buy the exact same test kit the inspectors are coming in to test with. And more times than not, that’s one of these reagent test kits than it is a test strip sort of situation, for sure.
Graham: We could keep going forever on water testing stuff. It gets to be a very deep, deep, dark rabbit hole but, for now, hopefully, that’ll at least explain some of the difference between test strips and what some of the other devices are doing and why people maybe are a little more wary of test strips.
Again, even given the subjective nature of a lot of these tests, test strips do seem to be on that far end of subjectivity. There’s nothing more subjective than test strips other than just staring at your float tank solution.
Ashkahn: Just taking a guess.
Graham: Yeah, exactly. Going on your hunch.
So, thanks for tuning into today’s episode. And, as always, you can submit your own ideas and questions on our website at floattanksolutions.com/podcast.
Ashkahn: Thanks everybody.
Recent Podcast Episodes
How Often Does Float On Party? – DSP 225
Ashkahn and Graham have developed a bit of a reputation over the years within the industry as party animals. Anyone who has met them can confirm this to be true. But how often to the throw parties at Float On? What are good occasions for float center parties and how do you throw one?
The guys share their party philosophy and offer some nice tips and tricks for throwing a sensory deprivation shindig.
Is there a “Best” Float Position? – DSP 224
Ashkahn and Graham thoroughly debunk the myth of a “best” float position. The Float On boys explicate their philosophy that there is no right way to float and instead talk about all the different positions they enjoy floating in. They learn more about each other than they expected to in the process.
What to Look for When Hiring a Float Center Employee – DSP 223
What makes a good float center employee? What does Float On look for when trying to find someone to take care of their salt monster tanks and their blissed out customers at the same time?
Ashkahn and Graham break down the qualities they look for when hiring, and what makes the people at Float On so special.
How Do you Incentivize Return Floaters without Memberships or Packages? – DSP 222
How many times has a float center owner had a first time floater come out of the tank and said something along the lines of “that was amazing! I need to do this every week!” and then they never see that person again? How do you get them to come back without committing to a membership or a high ticket package of floats?
Ashkahn and Graham share their thoughts on this exact problems and some of the creative solutions they’ve implemented at Float On to combat it. The key, for them, has been keeping it simple and making it accessible.
How to Schedule Your Float Center During the Slow Season – DSP 221
For most float centers, the summer months drastically change how busy it gets. It seems that zenning out to nothingness is moderately less appealing when there’s a lot of outdoor activities to enjoy.
Graham and Ashkahn share their thoughts on a reduced schedule. Float On runs 24 hours almost every day throughout the year. so reducing their schedule is typically against their philosophies. They explain some of the reasons people might consider it, what are some good ways to go about it, as well as explain some practices to consider avoiding when cutting hours.
Latest Blog Posts
Float Quarterly – January 2016
It’s been our pleasure to be actively involved in the float industry for over five years now. In 2016, we’re already on track to have more new centers opening, more press covering floating, and more resources for people just entering our salty world than ever before.
With so much action, we’ve decided to send out brief, quarterly updates on our industry to keep people posted on the all the latest happenings. Welcome to our first installment!
Training to Become a Certified Pool/Spa Operator
Each year at the Float Conference, we put on a Certified Pool/Spa Operator (CPO) training course. At first, that might strike you as an odd thing to have as part of a float tank conference. This post will explain what CPO training is and why we think it can be a really useful certification to have on your belt.
Increase Sales by Offering Retail in Your Float Center
On their own, float tanks have a limit to their profits. Retailing has the potential to bring extra money into your shop, but it also requires a lot of work and attention on your part to really be successful at it. At Float On, our retail contributes 6.5% towards our overall sales and 3% of total profit. While this might not seem like a large contribution, depending on your sales, it could end up paying the wages of a whole extra employee.
The Health Department and Float Tanks… How to get Approved!
If you’re working on starting a float center, chances are you’re nervously anticipating having to call the health department. We’ve all heard horror stories of people being asked to follow pool rules that don’t make sense for them, or having to do costly changes to their pump systems.
float tanks not regulatedBelow is our best advice for working with your health department to get your float center approved, but before we dive into that, it’s important to get a bit of an understanding as to how the health department works.
