Something in the world of floating have you stumped?
Show Highlights
Some people swear by tests strips. Others don’t. What’s the right way to do it for float tanks? Luckily we have two people who have learned, in frustratingly specific detail, everything there is to know about testing float tank water and how.
Show Resources
FTS Blog – The Basics of Float Tank Sanitation
FTS Product – Intro to Water Treatment (Free)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “Why do some people swear by test strips and other people recommend against them?”
Ashkahn: Okay, so I guess, what is out there other than test strips.
Graham: Let’s say what a test strip is. That might be good. We’re talking about testing your water quality here, and a test strip is a little strip that has pads on the end with chemicals in them that you dip in there to get a reading.
Ashkahn: Yeah, they come in little bottles, usually, and on the back of the bottle is like…
Graham: Let’s talk about what a bottle is for a second.
Ashkahn: All right. It’s a container that you put stuff into. They have a color chart on the back of the bottle, so you dip it in the liquid and you pull it out and you compare the color to what it says on the bottle and that gives you your reading. They make test strips for pretty much everything, I guess, really: pH, alkalinity, chlorine, bromine.
Graham: Pregnancy.
Ashkahn: So yeah, there’s lots of test strips out there and they’re probably the most common thing people know about, just because it’s what people use if you have a pool at home or a hot tub at home or something. Like people in residential settings, that’s what they’re using. They’re kind of like the most straightforward thing you could have, right? It’s literally like dip this in, look at the color. So you see a lot of test strips out there and then you hear about people saying maybe you shouldn’t be using test strips.
Graham: Yeah, and the thought behind that is that it’s one of the most subjective ways to test your water quality or your water metrics, and subjective in the sense that once you dip it in the water and hold it out, you’re now gauging your visual acuity against the colors on these tabs and the color on the bottle.
And there’s a saying in the water aquatic health world of, “Oh, is your pH not high enough and you’re using a test strip? Just hold it out of the water for another couple of seconds. It’ll be fine,” which is it keeps changing color even after you take it out of the water. So there is this sense where if you’re not hitting it at the exact right time, in the exact right light, and your eyes are good, then there’s a lot of variability there.
Ashkahn: Also, often test strips are not as accurate just by themselves to begin with as some of these other things we’ll talk about in a second, so it’s kind of all those things combined make it for not being the most reliable thing. They’re not the most precise tools to begin with and then on top of that there’s a lot of subjectivity in terms of your color perception, the lighting in the room, things like that, and there’s some subjectivity in terms of how long you are waiting to actually decide, “Now I’m taking this reading.” So all those things put together make it a less certain testing regimen than some of the other stuff.
So what’s the other stuff? They have these other test kits that have often just bottles of these reagents, as they call them, that are just chemicals that do a lot of the same stuff. They change colors. A lot of this is about color changing. So you’ll take a sample of your water, for example, and squirt 10 drops of some bottle in there, it’ll turn the whole thing green and then you’ll put like five drops of something else in there and that’ll turn it a different color, and then you have to put 10 more drops, or you count how many drops it takes to turn the liquid back to clear. That’s like some ways that you see this.
Every test kit’s different and they have their own slightly different ways and colors and number of things you’re dropping in, but at the end of the day it’s a lot of that. You’re either getting to some sort of end point that’s a lot clearer than testing a color against something, and sometimes it is actually testing a color, right? Like some of these nicer test kits, you’ll put something in, then you’ll compare the color, the liquid turns to a color on the side of a bottle or something like that.
Graham: Especially I feel like I’ve seen that a lot with those ones where you crush the tablets into the water and wait for it to change color. So there’s still a little bit of visual checking in that case too.
Ashkahn: I mean, you hear the same complaints about those. The testing itself, I think, is more accurate to begin with, but it’s still has the same problem of human beings having imprecise color perception, especially relative to each other. Some people just see slightly different colors, or the color temperature in the room that you’re in can adjust for things like that. I mean, the newer stuff that you see coming out is kind of electronic devices that basically do that.
Graham: That also look at the color and compare it for you.
Ashkahn: They just look at the color. Yeah, they’re just better at looking at color.
Graham: You’re just using robot eyes instead of your own fallible human eyes.
Ashkahn: Yeah, and it’s pretty much when you hear about electronic testing systems, you often think they’re something that’s like sampling the water in some crazy electronic way, but often they’re just literally shooting a beam of light into water and then deciding the color on their own, which is better — it’s a more precise way, or at least a more reliable or consistent way of getting a reading from something than doing it yourself.
Graham: A little word of warning is that we’ve had just a ton of trouble getting anything that’s kind of robotic-driven like that, like a spectrometer, to read the float tanks, just because the density of the salt water affects the light beams going through it in a way that you don’t have for regular water.
Ashkahn: Perhaps that, or perhaps just the chemistry to begin with was not working correctly.
Graham: Yeah, who knows? We don’t actually know. It’s all conjecture.
Ashkahn: It wasn’t the colors they was expecting, yeah. So, I don’t know, you’ll hear different things out there too.
A lot of places won’t even allow you to use test strips in a commercial setting. They’ll require that you use some sort of actual reagent test kit, and then we hear of some places where test strips is what they recommend, but that’s way more seldom than we hear the other way that you have to use a test kit.
At the end of the day, probably something to factor in is whatever testing thing your health department is using, like if you have someone coming in and inspecting your float tank, I’d buy the exact same test kit the inspectors are coming in to test with. And more times than not, that’s one of these reagent test kits than it is a test strip sort of situation, for sure.
Graham: We could keep going forever on water testing stuff. It gets to be a very deep, deep, dark rabbit hole but, for now, hopefully, that’ll at least explain some of the difference between test strips and what some of the other devices are doing and why people maybe are a little more wary of test strips.
Again, even given the subjective nature of a lot of these tests, test strips do seem to be on that far end of subjectivity. There’s nothing more subjective than test strips other than just staring at your float tank solution.
Ashkahn: Just taking a guess.
Graham: Yeah, exactly. Going on your hunch.
So, thanks for tuning into today’s episode. And, as always, you can submit your own ideas and questions on our website at floattanksolutions.com/podcast.
Ashkahn: Thanks everybody.
Recent Podcast Episodes
Thoughts on floating with a pacemaker – DSP 130
Sometimes you have customers with very specific needs or concerns about their float. In the case of medical concerns in regards to floating, there’s a lot we don’t know. Always always always have your customers discuss any serious medical concerns with their doctor. If for no other reason, if something does go wrong, even if it’s completely unrelated to their float, you’re not on the hook and have to deal with it.
Levels of noise that can affect floats – DSP 129
Soundproofing is costly and difficult, especially for float centers. Most recording studios don’t have to worry about showers or a solution that eats up concrete. It makes sense that we might want to quantify the challenge of sound in a very straight forward way, but the reality is much different than that. Different types of sound can penetrate float rooms at different intensities and different floaters will care more than others.
Graham and Ashkahn share some of their own frustrations with creating their ideal soundproofing for Float On and some helpful tips for identifying noise as well as some advice on how to keep your sanity.
Thoughts on non-compete clauses for employees – DSP 128
Float centers require a lot of upfront capital to get started up, and because of that it can feel like float centers should operate like big business, or perhaps bigger businesses than they actually are. Some centers may consider, at some point, having their employees sign non-compete clauses to prevent them from sharing trade secrets with competitors. Graham and Ashkahn have been at this for a while and express their opinions as to why this probably isn’t the most practical approach for your float center.
How often do you float? – DSP 127
This episode takes the time to have Graham and Ashkahn share their experiences in the tank. They take the opportunity to explain their relationships to floating and how they differ, and in some ways, how they are very similar.
Thoughts on floating with tinnitus – DSP 126
About 15% of people have tinnitus, at least in the United States. It’s one of the most common medical conditions in the country, but most people don’t think about how to accommodate it. Many people who have it don’t even notice it unless they’re in total silence, which adds a particular challenge to float centers.
Graham and Ashkahn talk about their experiences in floating people with tinnitus and how to approach the situation when and if a float becomes problematic.
Latest Blog Posts
2013 Start-a-Center Giveaway Winners Announced!
Look, this wasn't easy. When we launched this, we didn't expect nearly as many submissions as we ended up getting, and certainly not as many that were so compelling. All in all, there were over 140 participants and after reading through all of them, floating on it,...
‘Post-Float Environment and Interaction’
I don't have a lot to offer on this subject, as it has been a long time since I have operated a float center.... But, 'back in the day', it was rather simple: it was really up to the customer/floater how they wanted to be treated, post-float. Some customers wanted...
Lightening the Load Through Meaningful “Post Float” Conversation
The post float environment is as important as the environment in the float room because people are still in slower brain wave states after a float, and they generally seek time to sit down, relax, and process what happened during their float. Probably the best way to...
February Topic: Post-Float Environment and Interaction
The second month of our industry blog has arrived. The topic for February is 'Post-Float Environment and Interaction.' We'll be putting up the first post tomorrow, and you'll hear my take on things a little way through the month. I wanted to take a moment, however, to...
