Something in the world of floating have you stumped?
Show Highlights
Graham and Ashkahn have been around the proverbial float block. They’ve visited centers all over the world, consulted with them, and trained them on how to make their centers as good as possible. It’s tempting to ask them, specifically, what are some of the most common mistakes they’ve seen in this time.
Fortunately, someone did. The duo hash out exactly what they think of when it comes to both “common” and “expensive” construction mistakes for float centers, especially where those two points intersect on the float center Venn diagram of unhappiness.
Show Resources
FTS Product – Float Center Construction Packet – How to Build a Float Center
FTS Blog – Float On’s Halloween Spooktacular (horror stories about float center construction)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Yo, yo, yo, yo.
Ashkahn: Hey, hey, hey, hey, hey. This is Ashkahn.
Graham: And I’m Graham.
Ashkahn: And we have a question from somebody that we are going to answer today on this podcast.
Graham: That is a really good description of what we do here.
Ashkahn: Yeah.
Graham: And that question is …
Ashkahn: Yeah, that was your cue.
Graham: Yeah, it wasn’t the best cue that I’ve taken. “What are the most common/expensive construction mistakes you’ve seen float centers make?”
Ashkahn: Yeah, there are some big ones that you can make.
Graham: Yeah, and we’ve talked about some of them here too, just kind of scattered across different episodes, so-
Ashkahn: Here’s a-
Graham: You should go back and listen to every episode and see if you can spot them.
Ashkahn: Yeah.
Graham: It’s kind of like a Where’s Waldo, Where’s Waldo kind of thing.
Ashkahn: All right, let’s do this thing.
Graham: Okay.
Ashkahn: Number one, the-
Graham: Carpet. Putting carpet in your float room.
Ashkahn: That’s not very common.
Graham: But it is expensive.
Ashkahn: It’s not even as expensive as other things-
Graham: It’s true.
Ashkahn: You just rip the carpet up. Number one, improperly sloped floors.
Graham: Super common.
Ashkahn: Super common and very difficult to fix/expensive.
Graham: Yeah, because you have to tear out your flooring, re-slope things.
Ashkahn: Yeah, I mean, it’s just crazy, and it’s just hard. It’s just hard. You have all these floor drains in your room and they all need to have slopes going down to them, and it’s a very small room, and you know, you don’t have this crazy elite concrete guy because you have a relatively small project compared to other concrete projects in the world.
Graham: I’d say that’s actually what makes it the most, one of the most common. A lot of people try to slope their floors. We’ve seen so many centers that they’ve made an attempt to slope their floors and what’s happens is half of the slope works and half just dumps the water out their door, or does something equally as awful, you know?
Ashkahn: Or just like a pool, as soon as you get like a little bit of puddling somewhere, it means you have to clean that spot up every single time, forever. Like, every single transition, you need to have to be like, “Okay, gotta go get this puddle spot.” That’s why it’s so annoying. Like, little tiny mistakes that lead to something where the water doesn’t go down the drain well is like, continuous ongoing work for you and your staff for the rest of the time that you have that there.
Graham: Which is expensive in staffing cost and then also expensive to fix for something relatively little. You’re like, “Wow, I wish this room drained better,” and it’s like $40,000 to go in and like actually correct it for all of your rooms, you know?
Ashkahn: Yeah.
Graham: It’s insane. So yeah, that’s a really good one. I would say-
Ashkahn: Yeah, number two.
Graham: Yeah number two, was ceramic tile and cementitious grout, I would say is hugely expensive, right?
Ashkahn: Yeah.
Graham: Because you need to use certain types of tile and grout for it not to be destroyed by salt water. That’s going to be, usually porcelain tile and epoxy grout. That’s not obvious necessarily if you’ve not worked in this kind of corrosive setting before. Even in wet environments they’ll use non-porcelain tile because having the non epoxy grout, because having water soak in and then be able to evaporate is actually part of how a lot of tile rooms work and function. But in this case, they can’t be porous because salt water will wreak havoc on them.
Using them not only means that you have to go back and redo all of your tile and all of your grout when it starts decaying, and cracking, and stuff like that, but you’re likely to have water damage on all of the soundproofing and the expensive work that you did behind that tile.
Ashkahn: Yeah.
Graham: So likely tearing out all of yours soundproofing or at least a layer of it.
Ashkahn: Big trouble. Big trouble.
Graham: You might have mold back there in which case you need to do mold remediation as well. Yeah, so improperly sealing your walls and waterproofing in general, but I’d say within that is like a main category, is just using the wrong kind of tile.
Ashkahn: Yeah, and grout.
Graham: Yeah. Number three.
Ashkahn: Number three. Number three. Not having enough space to get your float tanks in and out of the room they’re supposed to go into.
Graham: Oh, good one. Yeah.
Ashkahn: Super common. So many stories out there of people building beautiful, nice, soundproofed, waterproofed walls, and then realizing their float tank’s too big. It doesn’t turn quite right because the hallway’s too narrow, or you’re just not quite making it up or down a staircase, or it’s not getting through the doorway, or for whatever reason, you now have to cut out a chunk of beautiful, thick, soundproof, expensive, waterproof wall, to be able to get a float tank in.
And any time you’d ever want to get that float tank out of the room, which doesn’t happen that often but it does happen, now it’s build into the room. You have to cut that same wall out. Huge trouble, super common.
Graham: Yeah, it’s a good one. That is a good one. We see it happen so often.
Ashkahn: Number four?
Graham: Number four.
Ashkahn: Number four.
Graham: Four-alido. Quattro. I would say extending your soundproofing all the way to the ceiling, or sorry, to the ceiling but not to the roof.
Ashkahn: Right.
Graham: So not extending your soundproofing past your ceiling, all the way to the roof or the next story.
Ashkahn: Yeah.
Graham: Because you’ve just built these nice soundproof walls, you’ve surrounded your float tank with them, your ceiling is finished, or it was finished before you did this. The time to do ceiling work is when there’s nothing else around for it to fall on, for you to have to kind of wedge little pieces up into the joists and stuff like that. If you don’t extend your sound proofing up past where your ceiling is so you actually have this kind of full barrier going all the way up to the next level of your building, then it means sound is just going to go right past all of your soundproofing. It’s just going to kind of hop over your wall. Like it follows the path of least resistance so it’s going to go through your thin ceiling, over the top of your wall, and back through a thin ceiling, right into your float room. It’s kind of all of this money wasted on the soundproofing that you did build because you’re not achieving near what it’s capable of if you’d just raised it up a little higher.
Ashkahn: Raise the roof.
Graham: You gotta the raise the roof.
Ashkahn: At least raise the walls.
Graham: The other expensive part is it’s not cheap to go back and replace that. To go in you either have to decide yeah, how you’re going to tackle this. Are you going to cut a thin slice of ceiling out on either side and then wedge little pieces in which is what we did at Float On, and was a very long process, and tedious, and hands still kind of hurt from thinking about doing that. Or, are you going to, yeah, tear out a bigger portion of the wall so it’s easier to extend back up? But then you just wasted a ton of money and resources building and finishing this wall that you’re now tearing out in little bits so you can extend it higher. So yeah, getting that right from the beginning is-
Ashkahn: Big trouble.
Graham: Another big one. Number five?
Ashkahn: Number five.
Graham: Number five.
Ashkahn: Number five. Not having float tanks. How many people build these beautiful float centers and then they just don’t put any float tanks in there?
Graham: Get out of here.
Ashkahn: And it’s like, what are your customers going to float in? You know? It’s crazy. Super common.
Graham: All right, number six? Do you actually have a number five over there?
Ashkahn: No, that’s it. I think those are the only problems that I think can happen.
Graham: I’ll say another one for soundproofing that’s common but not entirely expensive to fix is, getting unnecessary vibration into your float tank. You either set up the float tank so that it’s touching the wall or it’s not touching a wall, but it’s one that’s built in like a cabin style, like an ocean float room or something. When you build it in, it’s just those wooden pieces that you’re using as the mounts for the kind of outside finishing are just right up against the wall, it’s drilled into a wall. The base is just touching the floor. These are all weak points where despite all of your soundproofing, vibration is one of the hardest things to block out which is why it’s so important to completely isolate your float tank from anything else.
You know, having a vibration isolation system down underneath it where you use vibration isolation pads with a little stand on top of it. Making sure that it’s not coming into rigid contact with the walls. Making sure that even for its pump system, that the pump system is up on vibration isolation pads and there’s just no way of sound to travel through the ground, or the walls, into the float tank without some kind of disjointed semi air gap going on there. That one’s not expensive to fix, but it is really common, and it’s expensive in the sense that you’ve invested a lot in soundproofing. You’re not making like 50% out of the use to it, just because you didn’t go that extra 10% and make sure that everything’s actually isolated from vibration.
Ashkahn: Yeah. So there you go, six top reasons that six common mistakes that-
Graham: Call it five and a half. Yeah.
Ashkahn: Yeah, your last one is kind of a half one. If you guys have other questions that we can answer in list form like this, then go over to floattanksolutions.com/podcast and type them in, and you may just hear it. You may just hear us talking about it.
Graham: All right, thanks everybody.
Ashkahn: Bye.
Recent Podcast Episodes
How Often Does Float On Party? – DSP 225
Ashkahn and Graham have developed a bit of a reputation over the years within the industry as party animals. Anyone who has met them can confirm this to be true. But how often to the throw parties at Float On? What are good occasions for float center parties and how do you throw one?
The guys share their party philosophy and offer some nice tips and tricks for throwing a sensory deprivation shindig.
Is there a “Best” Float Position? – DSP 224
Ashkahn and Graham thoroughly debunk the myth of a “best” float position. The Float On boys explicate their philosophy that there is no right way to float and instead talk about all the different positions they enjoy floating in. They learn more about each other than they expected to in the process.
What to Look for When Hiring a Float Center Employee – DSP 223
What makes a good float center employee? What does Float On look for when trying to find someone to take care of their salt monster tanks and their blissed out customers at the same time?
Ashkahn and Graham break down the qualities they look for when hiring, and what makes the people at Float On so special.
How Do you Incentivize Return Floaters without Memberships or Packages? – DSP 222
How many times has a float center owner had a first time floater come out of the tank and said something along the lines of “that was amazing! I need to do this every week!” and then they never see that person again? How do you get them to come back without committing to a membership or a high ticket package of floats?
Ashkahn and Graham share their thoughts on this exact problems and some of the creative solutions they’ve implemented at Float On to combat it. The key, for them, has been keeping it simple and making it accessible.
How to Schedule Your Float Center During the Slow Season – DSP 221
For most float centers, the summer months drastically change how busy it gets. It seems that zenning out to nothingness is moderately less appealing when there’s a lot of outdoor activities to enjoy.
Graham and Ashkahn share their thoughts on a reduced schedule. Float On runs 24 hours almost every day throughout the year. so reducing their schedule is typically against their philosophies. They explain some of the reasons people might consider it, what are some good ways to go about it, as well as explain some practices to consider avoiding when cutting hours.
Latest Blog Posts
Float Quarterly – January 2016
It’s been our pleasure to be actively involved in the float industry for over five years now. In 2016, we’re already on track to have more new centers opening, more press covering floating, and more resources for people just entering our salty world than ever before.
With so much action, we’ve decided to send out brief, quarterly updates on our industry to keep people posted on the all the latest happenings. Welcome to our first installment!
Training to Become a Certified Pool/Spa Operator
Each year at the Float Conference, we put on a Certified Pool/Spa Operator (CPO) training course. At first, that might strike you as an odd thing to have as part of a float tank conference. This post will explain what CPO training is and why we think it can be a really useful certification to have on your belt.
Increase Sales by Offering Retail in Your Float Center
On their own, float tanks have a limit to their profits. Retailing has the potential to bring extra money into your shop, but it also requires a lot of work and attention on your part to really be successful at it. At Float On, our retail contributes 6.5% towards our overall sales and 3% of total profit. While this might not seem like a large contribution, depending on your sales, it could end up paying the wages of a whole extra employee.
The Health Department and Float Tanks… How to get Approved!
If you’re working on starting a float center, chances are you’re nervously anticipating having to call the health department. We’ve all heard horror stories of people being asked to follow pool rules that don’t make sense for them, or having to do costly changes to their pump systems.
float tanks not regulatedBelow is our best advice for working with your health department to get your float center approved, but before we dive into that, it’s important to get a bit of an understanding as to how the health department works.
