Something in the world of floating have you stumped?
Show Highlights
Should you allow people with fresh tattoos to float? How fresh is “fresh”, anyway? Graham and Ashkahn share their experiences.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: And welcome. Our question for today is “if someone comes in with a relatively fresh tattoo, what do you do?”
Ashkahn: What do you do about the tattoo, huh?
Graham: What to do about the tattoo?
Ashkahn: Well, I mean, this one seems pretty straightforward. Well, relatively fresh, I’m assuming, is within a few weeks of them getting it?
Graham: Right. Yeah, yeah.
Ashkahn: What you do is don’t let them float.
Graham: All right. We’ll see you next week for …
Ashkahn: That’s pretty much it.
Graham: So, it gets confusing, though, when it does get up to that three, four, five weeks point.
Ashkahn: Yeah.
Graham: It can depend not only on the size of tattoo, but even how deep it went and how much concrete line work you had versus shading, stuff like that. So, once again, telling them to consult the expert in their field, which in this case is the tattoo artist who gave them the tattoo, is totally what you should do. They shouldn’t be floating until their tattoo artist says that it’s all right to.
Ashkahn: Yeah. Our general, like anything less than about six weeks is where I would still have some amount of concern. Around that four to six week mark is where things seem kind of to be on the safer side, but then the problem’s not for you. Nothing’s gonna happen to your float tank if someone gets in there with a tattoo that’s not properly healed.
Graham: Yeah. You’re not worried about the ink getting into the tank or some bloodborne bacteria getting in-
Ashkahn: The tattoo rubbing off.
Graham: Yeah.
Ashkahn: Now there’s a tattoo on the bottom of the tank, just stuck there.
Graham: So, yeah, you are very much just worried about the person’s experience and their tattoo, and not causing any damage to it. It can happen. I’ve definitely heard at least one really terrible horror story of someone who had a relatively new center, and they left one of their staff in charge of it, and the staff didn’t know to turn the person away who had come in with the tattoo, and it was several weeks old, and they were like, “Oh, it’ll probably be fine.”
So, the floater went in and comes out really soon, after 10 or 15 minutes or something, and it was way too painful to actually stay in the tank. But the worst of that is was that even that small amount of time in the float tank, the saltwater had already kind of irreparably damaged the tattoo, to the point where the center owner had to pay to have an actual coverup expert, tattoo expert, come in and fix the tattoo. So, even more expensive than the initial regular tattoo work.
I’m sure it also sucked for the person with the tattoo, because now they’ve had to get it twice, and it didn’t end up exactly how they wanted it in the first place, so just a terrible, terrible situation all around. So, it’s one of those things where you just don’t want to take chances on it.
Ashkahn: Yeah. Yeah, that sounds, that does not sound like a great situation.
Graham: No. It was an unfortunate call to get one day, yeah.
So, just say no.
Ashkahn: To tattoos. Yeah.
Graham: Just say no to the tattoo. All right. Short episode for today, but no worries, because we’ll be back tomorrow. And if you have any questions in the meantime that you want answered, just go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
How to Help Float Research – DSP 300
With the push from Justin Feinstein at LIBR to get more float centers involved in research, many float center owners are chomping at the bit to push studies forward on the benefits of floating. But where do you start and how do you make it happen?
Graham and Ashkahn discuss this idea and how to do research right, as well as some of the things that might be helpful OR harmful to the world of floating in the eyes of the scientific community. There’s a lot of nuanced things to know about proper research and if you go in overzealous without considering how established science is done, it can harm the reputation of the practice.
Tips on Running Power to Float Rooms – DSP 299
Graham and Ashkahn offer some helpful tips to keep in mind when planning out the electrical framework for your float rooms. How many circuits you should plan for, where to place outlets, GFCI compliance, just to name a few.
Definitely an essential episode for anyone to listen to before going into their build-out phase.
Floating in National Media – DSP 298
Seeing float tanks in the national news and culture has increased in regularity within the last few years. Graham and Ashkahn discuss how these things get on such a large platform. The guys briefly go over some of the major stories that have been all over the media and how those stories happened. Mostly it comes down to luck, but there are a few things that can increases the chances of your float center getting on national TV.
The Real Tips on Building Your Own Float Tank – DSP 297
Someone wrote in and asked, again, despite the repeated warnings of the previous episode covering this topic, how to build a float tank properly.
Graham and Ashkahn try their best to restrain themselves and offer some practical advice about how to build your own tanks while also repeatedly warning about things to look out for when going forward with the process.
How to Handle Other Float Centers Spying on You – DSP 296
Graham and Ashkahn talk about how they deal with other float centers spying on Float On.
Basically… they don’t. The float industry is a really open community and a lot of information is generally freely available. If someone is spying on a float center, that could be a result of poor communication skills or a lack of awareness of what information is actually out there. The guys share their advice on how to talk to someone who might be in that situation and how to move forward, hopefully as friends instead of rivals.
Latest Blog Posts
Reflections from the Rise Float Gathering
Over this past weekend, a good chunk of the Float Tank Solutions and Float Conference crew ventured to St. Louis, MO for the first ever Rise Community Float Gathering. Beyond our excitement to see old friends and meet new ones, we were thrilled to be able to attend a float event that we didn’t have to plan.
When it comes to float tanks, we often deal with a lot of the “what” and the “how” of things – what do I need to do to open a float center and how to I make everything work? We write blogs and put out content. We spend our days thinking about conference flowcharts, water chemistry, detailed business plans, soundproof insulation, etc.
Rise, on the other hand, focused on the “why?”
The Story Behind the Float Marketing Forum
Over the past few years, primarily through feedback received from conference attendees and through industry survey responses, float center owners struggled with and wanted a solution to one thing… marketing. It makes sense – if there’s one thing every center needs (besides salt), it’s a solid flow of customers in tanks.
After some brainstorming with Ashkahn, we’ve decided the best solution for this year was to host a series panels covering key marketing topics that will provide the biggest impact in growing your float center business.
Introducing: The Float Conference Marketing Forum.
Announcing the 2nd Ever Start-a-Center Giveaway WINNER!
In what was one of the most difficult decisions that we had to make as a team… and after sorting through nearly 200 entries… we’ve decided upon a winner in our second ever Start-a-Center Giveaway.
Read more to learn who we’ll be guiding through the process in starting a float tank center in their community.
Gut your space before construction!
One line we don’t think you should cross is this: as much as possible, when building out your float center, gut it completely. Start from scratch.
At least then the mistakes you make are your own and your building will hold fewer surprises down the line. There are many benefits that you may not think of immediately. In this post, we’ll guide you through some of them.
