Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Should you allow people with fresh tattoos to float? How fresh is “fresh”, anyway? Graham and Ashkahn share their experiences.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: And welcome. Our question for today is “if someone comes in with a relatively fresh tattoo, what do you do?

Ashkahn: What do you do about the tattoo, huh?

Graham: What to do about the tattoo?

Ashkahn: Well, I mean, this one seems pretty straightforward. Well, relatively fresh, I’m assuming, is within a few weeks of them getting it?

Graham: Right. Yeah, yeah.

Ashkahn: What you do is don’t let them float.

Graham: All right. We’ll see you next week for …

Ashkahn: That’s pretty much it.

Graham: So, it gets confusing, though, when it does get up to that three, four, five weeks point.

Ashkahn: Yeah.

Graham: It can depend not only on the size of tattoo, but even how deep it went and how much concrete line work you had versus shading, stuff like that. So, once again, telling them to consult the expert in their field, which in this case is the tattoo artist who gave them the tattoo, is totally what you should do. They shouldn’t be floating until their tattoo artist says that it’s all right to.

Ashkahn: Yeah. Our general, like anything less than about six weeks is where I would still have some amount of concern. Around that four to six week mark is where things seem kind of to be on the safer side, but then the problem’s not for you. Nothing’s gonna happen to your float tank if someone gets in there with a tattoo that’s not properly healed.

Graham: Yeah. You’re not worried about the ink getting into the tank or some bloodborne bacteria getting in-

Ashkahn: The tattoo rubbing off.

Graham: Yeah.

Ashkahn: Now there’s a tattoo on the bottom of the tank, just stuck there.

Graham: So, yeah, you are very much just worried about the person’s experience and their tattoo, and not causing any damage to it. It can happen. I’ve definitely heard at least one really terrible horror story of someone who had a relatively new center, and they left one of their staff in charge of it, and the staff didn’t know to turn the person away who had come in with the tattoo, and it was several weeks old, and they were like, “Oh, it’ll probably be fine.”

So, the floater went in and comes out really soon, after 10 or 15 minutes or something, and it was way too painful to actually stay in the tank. But the worst of that is was that even that small amount of time in the float tank, the saltwater had already kind of irreparably damaged the tattoo, to the point where the center owner had to pay to have an actual coverup expert, tattoo expert, come in and fix the tattoo. So, even more expensive than the initial regular tattoo work.

I’m sure it also sucked for the person with the tattoo, because now they’ve had to get it twice, and it didn’t end up exactly how they wanted it in the first place, so just a terrible, terrible situation all around. So, it’s one of those things where you just don’t want to take chances on it.

Ashkahn: Yeah. Yeah, that sounds, that does not sound like a great situation.

Graham: No. It was an unfortunate call to get one day, yeah.

So, just say no.

Ashkahn: To tattoos. Yeah.

Graham: Just say no to the tattoo. All right. Short episode for today, but no worries, because we’ll be back tomorrow. And if you have any questions in the meantime that you want answered, just go to floattanksolutions.com/podcast and we will answer them.

Recent Podcast Episodes

Should I Wire my Float Tanks into the Wall? – DSP 265

Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.

On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them. 

Can I Keep My Old Ceiling With My Buildout? – DSP 264

Hopefully everyone had a lovely time at the Friday Activities and the after-party.

Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!

Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling. 

What to Expect When Expanding from 1 to 3 Tanks? – DSP 263

Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily. 

Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags? 

Fortunately, these guys know the score and are happy to share. 

All About Floor Drains – DSP 262

As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast. 

Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider. 

How to Deal with Float Room Humidity – DSP 261

Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference. 

Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand. 

Latest Blog Posts

The Float Tour Blog – Issue #24

The Float Tour Blog – Issue #24

Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.

Don’t Mess With Alberta!

At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.

The Float Tour Blog – Issue #23

The Float Tour Blog – Issue #23

After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.

The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.

It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.

The Float Tour Blog – Issue #22

The Float Tour Blog – Issue #22

We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.

After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.

After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.

The Float Tour Blog – Issue #21

The Float Tour Blog – Issue #21

Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.