Something in the world of floating have you stumped?
Show Highlights
Should you allow people with fresh tattoos to float? How fresh is “fresh”, anyway? Graham and Ashkahn share their experiences.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: And welcome. Our question for today is “if someone comes in with a relatively fresh tattoo, what do you do?”
Ashkahn: What do you do about the tattoo, huh?
Graham: What to do about the tattoo?
Ashkahn: Well, I mean, this one seems pretty straightforward. Well, relatively fresh, I’m assuming, is within a few weeks of them getting it?
Graham: Right. Yeah, yeah.
Ashkahn: What you do is don’t let them float.
Graham: All right. We’ll see you next week for …
Ashkahn: That’s pretty much it.
Graham: So, it gets confusing, though, when it does get up to that three, four, five weeks point.
Ashkahn: Yeah.
Graham: It can depend not only on the size of tattoo, but even how deep it went and how much concrete line work you had versus shading, stuff like that. So, once again, telling them to consult the expert in their field, which in this case is the tattoo artist who gave them the tattoo, is totally what you should do. They shouldn’t be floating until their tattoo artist says that it’s all right to.
Ashkahn: Yeah. Our general, like anything less than about six weeks is where I would still have some amount of concern. Around that four to six week mark is where things seem kind of to be on the safer side, but then the problem’s not for you. Nothing’s gonna happen to your float tank if someone gets in there with a tattoo that’s not properly healed.
Graham: Yeah. You’re not worried about the ink getting into the tank or some bloodborne bacteria getting in-
Ashkahn: The tattoo rubbing off.
Graham: Yeah.
Ashkahn: Now there’s a tattoo on the bottom of the tank, just stuck there.
Graham: So, yeah, you are very much just worried about the person’s experience and their tattoo, and not causing any damage to it. It can happen. I’ve definitely heard at least one really terrible horror story of someone who had a relatively new center, and they left one of their staff in charge of it, and the staff didn’t know to turn the person away who had come in with the tattoo, and it was several weeks old, and they were like, “Oh, it’ll probably be fine.”
So, the floater went in and comes out really soon, after 10 or 15 minutes or something, and it was way too painful to actually stay in the tank. But the worst of that is was that even that small amount of time in the float tank, the saltwater had already kind of irreparably damaged the tattoo, to the point where the center owner had to pay to have an actual coverup expert, tattoo expert, come in and fix the tattoo. So, even more expensive than the initial regular tattoo work.
I’m sure it also sucked for the person with the tattoo, because now they’ve had to get it twice, and it didn’t end up exactly how they wanted it in the first place, so just a terrible, terrible situation all around. So, it’s one of those things where you just don’t want to take chances on it.
Ashkahn: Yeah. Yeah, that sounds, that does not sound like a great situation.
Graham: No. It was an unfortunate call to get one day, yeah.
So, just say no.
Ashkahn: To tattoos. Yeah.
Graham: Just say no to the tattoo. All right. Short episode for today, but no worries, because we’ll be back tomorrow. And if you have any questions in the meantime that you want answered, just go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
How to Keep Your Float Center at 100% Capacity – DSP 125 (April Fool’s)
Tired of running gimmicky marketing with steep discounts because your float center has an empty schedule?
Do you want that easy lifestyle business where customers just flock to you instead of you having to hunt them down? Want to be able to raise your prices without worrying about losing revenue?
Graham and Ashkahn share a secret they recently discovered while on their trip to Australia about how you can keep your float center 110% full at all times (that extra 10% isn’t cliche, it’s a waitlist)!
What are UL Field Evaluations? – DSP 124
A UL Field evaluation is something that can be requested from your Health Department or regulator, often prior to opening. It’s designed to ensure a certain standard for electrical equipment in commercial businesses. Graham and Ashkahn break down the process of getting a UL Field evaluation, how much it’s likely to cost, and even some tips when discussing this with your health department.
What is HDPE? – DSP 123
So HDPE stands for High Density Polyethylene. It’s a type of plastic and it’s incredibly handy for float centers. Float On switched to using this any place they previously would’ve used wood in their building materials.
Graham and Ashkahn break down exactly what this miracle product is, where you can buy it, all the different uses it has in a float center, and some special tips and tricks of getting it just the way you need it.
Causes of Float Related Neck Tension – DSP 122
The good news is that it doesn’t seem to happen after the first float, the bad news is we’re not really sure why it happens, but we have some theories. This even happened to Ashkahn the first time he floated, so this is an issue very personal to his heart.
Thoughts on Attending Trade Shows – DSP 121
When you’re just starting out, you’ll try anything to get the word out. Trade shows are a fairly common way to generate interest in a new technology or practice, so why not floating?
Graham and Ashkahn have a few trade shows under their belt and they’ve had modest almost success at them. They lay out their experiences and challenges that float tanks face at a venue like this and what you should be prepared for if you decide to attend one.
Latest Blog Posts
Start-a-Center Giveaway 2013
While we wait for the next month of blog posts to roll in, I wanted to announce a thank you promotion we're putting out. We've had over 500 items downloaded from our site since we started just a couple months ago, which means the industry is growing. The feedback...
An Autobiography of Floataway
I was always interested in making things and taking things apart. So after A levels in Physics, Chemistry and Maths, I chose Mechanical Engineering at Bristol University, UK, My first floating experience was in an inflatable toy boat before I could swim, and it was...
An Introduction from Sweden
Anu Enok Looking back, I realize that I’ve been a ”seeker” most of my life. I have always ”wanted to know what to find around the next corner”, which means I have tried a lot of things. I have been mixing jobs and studies. I have studied different stuff like market...
A Little Past
In the late 1960's, I was a systems computer programmer. At one point, I was in a department with just two other people. If I went down to the cafeteria with one of them, I would talk. But if I went down with both of them, I was too shy, and I would be silent. In...
