Something in the world of floating have you stumped?
Show Highlights
Should you allow people with fresh tattoos to float? How fresh is “fresh”, anyway? Graham and Ashkahn share their experiences.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: And welcome. Our question for today is “if someone comes in with a relatively fresh tattoo, what do you do?”
Ashkahn: What do you do about the tattoo, huh?
Graham: What to do about the tattoo?
Ashkahn: Well, I mean, this one seems pretty straightforward. Well, relatively fresh, I’m assuming, is within a few weeks of them getting it?
Graham: Right. Yeah, yeah.
Ashkahn: What you do is don’t let them float.
Graham: All right. We’ll see you next week for …
Ashkahn: That’s pretty much it.
Graham: So, it gets confusing, though, when it does get up to that three, four, five weeks point.
Ashkahn: Yeah.
Graham: It can depend not only on the size of tattoo, but even how deep it went and how much concrete line work you had versus shading, stuff like that. So, once again, telling them to consult the expert in their field, which in this case is the tattoo artist who gave them the tattoo, is totally what you should do. They shouldn’t be floating until their tattoo artist says that it’s all right to.
Ashkahn: Yeah. Our general, like anything less than about six weeks is where I would still have some amount of concern. Around that four to six week mark is where things seem kind of to be on the safer side, but then the problem’s not for you. Nothing’s gonna happen to your float tank if someone gets in there with a tattoo that’s not properly healed.
Graham: Yeah. You’re not worried about the ink getting into the tank or some bloodborne bacteria getting in-
Ashkahn: The tattoo rubbing off.
Graham: Yeah.
Ashkahn: Now there’s a tattoo on the bottom of the tank, just stuck there.
Graham: So, yeah, you are very much just worried about the person’s experience and their tattoo, and not causing any damage to it. It can happen. I’ve definitely heard at least one really terrible horror story of someone who had a relatively new center, and they left one of their staff in charge of it, and the staff didn’t know to turn the person away who had come in with the tattoo, and it was several weeks old, and they were like, “Oh, it’ll probably be fine.”
So, the floater went in and comes out really soon, after 10 or 15 minutes or something, and it was way too painful to actually stay in the tank. But the worst of that is was that even that small amount of time in the float tank, the saltwater had already kind of irreparably damaged the tattoo, to the point where the center owner had to pay to have an actual coverup expert, tattoo expert, come in and fix the tattoo. So, even more expensive than the initial regular tattoo work.
I’m sure it also sucked for the person with the tattoo, because now they’ve had to get it twice, and it didn’t end up exactly how they wanted it in the first place, so just a terrible, terrible situation all around. So, it’s one of those things where you just don’t want to take chances on it.
Ashkahn: Yeah. Yeah, that sounds, that does not sound like a great situation.
Graham: No. It was an unfortunate call to get one day, yeah.
So, just say no.
Ashkahn: To tattoos. Yeah.
Graham: Just say no to the tattoo. All right. Short episode for today, but no worries, because we’ll be back tomorrow. And if you have any questions in the meantime that you want answered, just go to floattanksolutions.com/podcast and we will answer them.
Recent Podcast Episodes
Tips for filling an empty service schedule – DSP 90
There are fewer things more stress inducing for a float center than seeing their schedule for the week and having it just be completely empty (Maybe watching your pump start up and spray water over your entire float room, but it’s a close call). What do you do in that situation? And how do you prevent it from happening in the future?
Well, Graham and Ashkahn have tried everything, from doing shout outs and deals on social media, to literally walking down the street trying to convince people to come in and float while the tanks were empty. Some tactics are more effective than others, but what it really comes down, at least in Float On’s case, is being prepared to give out a ton of free floats.
The guys talk about the effectiveness of each strategy they’ve tried and how they’ve reached out to contacts to form mutually beneficial business relationships and really get the ball rolling with filling up their tanks.
pH testing devices for float tank solution – DSP 89
There are lots of things you can measure when testing the quality of your water, for sanitation and comfort. Many of which aren’t specifically designed for float tanks. This is kind of an open secret in the industry, but most things simply aren’t accurate because of the incredibly high salinity of float tank solution. And pH seems to be one of them. This can cause float center owners major headaches as it’s often one of the first things that health departments/regulators will want to measure when they come and inspect your place (if they do at all).
Graham and Ashkahn try to break down this mystery of float water and try to break down some theories as to why it might be that float tank water might not have accurate pH readings, regardless of how you measure it.
Handling humidity to reduce water drops on tank ceilings – DSP 88
One of the biggest Float Mysteries in the industry is how to properly deal with condensation in a float tank. Your float tank is basically a giant humidity generating machine so clearly there’s going to be some condensation, but how much and why it forms can vary for seemingly no reason, making managing it difficult. The last thing any float center owner wants is for it to affect the floats they’re running (little water droplets falling on floaters is no fun).
Graham and Ashkahn commiserate with the industry about the difficulties in dealing with this particular hot topic, while also delving into the science of it and common solutions that should help any float center owner that’s facing this problem.
The purpose of a flow meters and the flow rate for a float tank – DSP 87
When navigating demands from health departments, it can be an absolute minefield of regulation, oftentimes with holdovers from the pool and spa industries. Many of these can be superfluous to float centers, but if you’re just starting a center, it’s difficult to know which ones to ignore, and which ones to incorporate.
Flow meters fall into this weird gray area where they’re not as important for float centers as for pools (and in some cases aren’t really needed at all), but can still be required by health departments or regulators. And to not throw the baby out with the salty bathwater, there are definitely some very practical uses for flow meters on float tanks.
Graham and Ashkahn tackle all these confusing elements and even provide specific product recommendations for flow meters for float tanks. Give it a listen!
When to contact health department – DSP 86
Contacting your health department/inspector/regulator/enforcer/supreme overlord can be stressful, to say the least. And given their general lack of understanding of floating as an industry, it makes sense why float centers may put this off. However, they have the authority to shut down your business if they feel that it’s a public safety issue, and that’s a situation no one should put themselves in.
Talking to your health department early and often can save yourself some headaches, but you don’t want to go to them unprepared. There’s a lot of nuance to regulation and existing codes that you should probably be familiar with beforehand. Fortunately, it may be something other float centers in your area have had to deal with, if there are any.
Ashkahn and Graham have a few tips for what to do to prepare and how to address common concerns they may have in this episode.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
