Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

Construction and buildout are likely  going to be some of the largest expenses for any float center. Possibly even more than the float tanks themselves in some situations. Most float center owners aren’t millionaires, and when faced with these large expenditures, it can be difficult to decide what to cut to keep your costs down. Doing your own construction can be an effective way to go about that, but with so much technical work needed to go into building a float center, is that really the right thing to do?

Graham and Ashkahn lay down some knowledge on this, having both worked on a lot of their buildout themselves initially, as well as hired out workers for repairs and upgrades.

Show Resources

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: And today’s question is, “I’m pretty handy and have worked as a general contractor in the past. What parts of building a float center do I need to hire professionals for?” This is a little bit tricky.

Ashkahn: Probably a lot of it still.

Graham: Yeah, it’s a little bit of a tricky question and it’s another one of those, “the more work you decide to do yourself, certainly the more at risk you’re putting everything.”

Ashkahn: And the work’s not easy work, you know.  It’s not like very simple construction that you’re trying to do to get a float center up and running. I mean, of course, there’s certain legal things. Like, you probably can’t unless you have a plumber’s license and electrician’s license and things like that.

Graham: Certified HVAC installer for any kind of mechanical permitting work you need to pull.

Ashkahn: So, I mean, you probably can act as a general contractor. Like if you think you have the general knowledge and stuff like that. And just having an eye for construction is a huge help in and of itself.

Graham: Yeah, I would almost say the best thing about you being a contractor in the past, is you probably have some good connections in your area if you’re a contractor in your city. You know, if your license is still valid, then that gives you some nice access to contractor supply rates, without needing to go through your contractors. There’s certain benefits to it, even if you’re doing none of the labor yourself. And again, the biggest one in my mind is being able to vet out other people and their work is an awesome resource to have at your disposal as a result of previous work and training.

Ashkahn: I mean the main stuff that you would be able to do yourself, in a construction site, would be the framing and the drywall and all that sort of stuff. The stuff that doesn’t require a certification for and even that gets a little bit tricky. I mean even just slapping up drywall is not quite as easy in a float center. Like, you’re dealing with a lot more expensive pieces of sheetrock than you would be otherwise, if you’re dealing with the soundproof sheetrock and so you just want to be wiser about how you’re cutting it and not screwing things up is one part of it.

Graham: Yeah, I guess there’s a good lesson here in that even if you’re going with … if you personally don’t have contracting experience, if you’re hiring contractors anything like that, just know that the work going into a float tank center is probably really different than work that contractor has done in the past. Again, whether it’s you or someone else. You probably haven’t gone and installed totally soundproof assemblies with waterproofing or anything like that. And if you have worked on home theaters, if you’ve worked on professionals studios, if you’ve worked on pools or even on boats or something like that, all of that’s really good experience. It’s a little more relevant, just than your basic residential contracting experience.

Ashkahn: But, yeah, you know, it becomes important. You want someone who can put up sheetrock with very, very small gaps between the pieces. That’s going to pay off, in terms of your sound proofing as opposed to, maybe you’re not quite as good as that and you’re leaving bigger gaps. The nice thing is if it’s you, you care a lot.

Graham: Yeah.

Ashkahn: Which is definitely a big help. It’s very important to you that it gets done right, so if you’re doing it yourself, you have that going for you. But even in something that you might think is a very common thing to be able to do yourself, like sheetrock, there are some benefits that come from paying someone who can actually do a good job of getting pieces like really well and nicely cut and tight together.

Graham: And there’s another part of this too, which is warranties. Right? The more of the work that’s being done by other people. Especially even things like putting up your waterproofing and stuff like that, which maybe you could do yourself, but now if your waterproofing fails, do you want that all to be on you and you can’t really claim a warranty for the installation or anything like that. Just having someone else who’s on the line to be the one to come in and fix something or pay the money if something goes wrong can be a reason in itself to – even if you possess the qualifications – to not just do things yourself.

Ashkahn: Yep. So I guess I’d say you’re in a good position to be your own general contractor. ‘Cause it’s one of the things that there’s not really a general contractor specializing in float tank centers.

Graham: Right.

Ashkahn: There’s not like that kind of expertise that you’re missing out on. So hopefully if you have good connections from being a contractor before, that’d be the real main benefit you’d get from having another person be your general contractor is those connections.

Graham: And I should just put in a little aside, that in order to be a general contractor, you either need to be in a state where, as the owner of your business, that just allows you to serve as general contractor, which some places do, or you need to still have your contractor license active, of course. But if you were a contractor, you already know that. Hopefully.

Ashkahn: So that seems fine to me and probably a benefit to you, that you can act as your own general contractor and then beyond that, I’d probably, if you can, find good people to do the specific parts of the work.

Graham: Yeah, to do the water proofing. To do the … well, again, any licensed work, your hands are kind of tied. Concrete sloping, things like that, you want consumate professionals.

Ashkahn: Yeah.

Graham: Unless you personally have tons of experience in concrete work, especially interior concrete work. That’s probably not one of the things you want to do yourself.

Ashkahn: Yeah, that’s real hard. Getting the slopes right from multiple drains from a single room, all that sort of stuff.

Graham: All of this too is coming from us having done a ton of construction ourselves and knowing how hard it is and how hard it is to get things right. And when you’re opening too, there’s so much to do that’s not construction. From the marketing to starting to figure out who you’re going to bring on for early employees and training them and everything. If you’re being called in all these different directions, at some point you’re probably going to drop the ball on one of them. So, a realistic assessment of your time and how many business partners you have is definitely necessary as well.

Ashkahn: I will say, having this kind of construction knowledge will be super handy after the point that you’re opening and when there’s little stuff that needs to be fixed and upkeep and ongoing maintenance and all that sort of stuff, all this is going to come in super, super handy.

Graham: Yeah, again, I said it earlier, but I would view it almost as a superpower for being able to vet other things and all the benefits you get from being experienced in this realm and consider, not necessarily doing the bulk of the work yourself. Maybe a lot of the benefits you get from your past experience are more fringe benefits and come from that side of things.

Ashkahn: Cool. I think that’s good.

Graham: I feel good.

Ashkahn: If you guys have more questions for us, you can go to floattanksolutions.com/podcast and use your fingers to type them on in there.

Recent Podcast Episodes

Floating with Intention – DSP 205

Not every float is going to be pure bliss. Sometimes the anxiety doesn’t go away. Sometimes that back pain is still there. Are there ways to float with intention to help control the outcome of a float? 

Graham and Ashkahn share their thoughts on techniques intended on getting the most out of your float and things that may work, as well as the perils of trying to control how your float goes. 

Different Reasons for Writing a Float Center Business Plan – DSP 204

Writing a business plan can often feel like you’re throwing hard work into the void. If you’re not getting a bank loan, who’s going to see it? What’s the point of it if all the numbers are going to be different?

Graham and Ashkahn break down their experiences of starting Float On without a business plan and how useful it was writing one later, as well as how they’ve used that business plan to help dozens of other centers get funding and open their doors. 

How Many Times Should A Float Center E-mail about Deals? – DSP 202

Let’s say you’ve got a discount going on and you’re counting on your email mailing list to get some traction. How many times should you email? A lot? A little? Well, the answer depends on who you ask and your own business philosophy.

Ashkahn and Graham share Float On’s philosophy on reaching out to mailing lists and how they reached those conclusions.

Should my Float Center Have Dynamic Pricing? – DSP 201

Dynamic pricing AKA changing prices based on demand or availability, is a pretty common tactic in certain industries. Airlines do it with tickets. Restaurants and bars do it with “happy hour” to get people to come in during slow times.

Graham and Ashkahn weigh in on this practice as it pertains to the float industry and, if you are going to do it, how to do it right so you get the most bang for your buck without confusing your customers. 

Latest Blog Posts

The Many Floaty Things We Are Looking Forward To…

The Many Floaty Things We Are Looking Forward To…

Although we encourage people to live in the current moment, the team here at Float Tank Solutions is anxiously looking forward to what’s coming up at the 2015 Float Conference on August 13-17th. Admittedly, we’re a little spoiled being allowed behind the scenes access...

The 2015 State of the Float Industry Survey

The 2015 State of the Float Industry Survey

Prior to the 2014 Float Conference we set out to get a snapshot of the floatation industry while we had the majority of the community in one place. From that survey we gathered the only statistics we have on floatation and publicly released those findings in our 2014...

Finding the Right Temperature for Your Floaters

Finding the Right Temperature for Your Floaters

What is the Perfect Float Temperature? I am sure we have all heard of the skin receptor neutral temperature that float centers preach. The sacred 93.5 degrees Fahrenheit. It seems to be the temperature that most centers set their tanks’ water to. We even do it at...

How to Properly Wake a Floater

How to Properly Wake a Floater

aka What to Do when You’ve Got a “Sinker” There are multiple ways to let your floaters know that it is time to get out of the tank. According to float lore, the first centers to open back in the 70’s used to wake people up by popping open the hatch and giving the...