Something in the world of floating have you stumped?
Show Highlights
One of the biggest Float Mysteries in the industry is how to properly deal with condensation in a float tank. Your float tank is basically a giant humidity generating machine so clearly there’s going to be some condensation, but how much and why it forms can vary for seemingly no reason, making managing it difficult. The last thing any float center owner wants is for it to affect the floats they’re running (little water droplets falling on floaters is no fun).
Graham and Ashkahn commiserate with the industry about the difficulties in dealing with this particular hot topic, while also delving into the science of it and common solutions that should help any float center owner that’s facing this problem.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “I have a bunch of water drops that keep forming on the top of my float tank. What should I do to stop that?”
Ashkahn: Bummer.
Graham: So, first of all, this is really common. These things are giant humidity generating machines. So, it’s not the most surprising thing in the world that it’s forming on the ceiling there.
Ashkahn: Yeah. It happens.
Graham: The problem with this too, we should say, is not that it’s on the ceiling, it’s that mid-float you’ll get these water droplets that come down. It’s like this weird water torture where you don’t know how often or what body part it will hit.
Ashkahn: It’s pitch black.
Graham: Once every 20 minutes come down and disrupt your float.
Ashkahn: It’s pretty horrible. Once it happens, you just can’t relax anymore.
Graham: Yup.
Ashkahn: So, what causes it? What causes this condensation? What’s the condensation cause?
Graham: It’s giant humidity…? It’s a pool of water that’s kept at 94 and a half degrees.
Ashkahn: Here’s what I’m getting at: usually the condensation is either existent or especially pronounced when there’s a big temperature difference between the inside of the float tank and the outside of the float tank.
Graham: Like a soda can.
Ashkahn: Like a soda can, or like anything that holds condensation.
Graham: Like any object in the world.
Ashkahn: Various float tanks have things to try to prevent those too. From the way the ceilings are sloped to radiant heaters inside the ceilings like the Samadhi tanks have. I think some other float tanks might have that too. A lot of float tanks if they don’t have that will put a lot of insulation up at the top, things like that to all cut down on the problem. Still, if you do have a pretty serious temperature difference between the outside and the inside, which usually means colder on the outside, warmer on the inside. You’re going to get that condensation. I mean it always means that, otherwise the condensation would be on the reverse.
Graham: On the other side.
Ashkahn: When you have this situation that’s when it comes. There’s I think two big things to help deal with it. One, is humidity control. That’s part of it, is making sure that you’re trying to keep the area not extremely humid.
Graham: Even a little bit of airflow getting into the tank, hopefully not enough to disrupt the float or even be felt by the person on the inside, but just any kind of circulating air towards the top will also work to eliminate some of that condensation, which is nice.
Ashkahn: Probably the biggest thing that’s going help is keeping the room that your float tank is in warmer. Actually whatever heating system you have to heat the room, you might want to consider bumping it up a little bit and trying to equal out that temperature.
Graham: It also sometimes depends on time of year.
Ashkahn: Yeah, that’s what we find at our place.
Graham: Again with the temperature differential, winter tends to be the worse time for condensation gathering on the float tanks and causing issues. Even with kind of getting this ideal – at least with floater comfort, plus stopping condensation – interior air temperature down. We still have issues with that forming in some of our rooms and the solution we have right now is actually just checking the ceiling between every person and having basically a …
Ashkahn: Stick with a …
Graham: Rag on it. We just clean our tanks with a rag on a stick.
Ashkahn: One of those almost like a Swiffer-shaped thing.
Graham: We do that. We use a telescoping pole and go in there and get the humidity off the ceilings of the cabins just in between people. I was just talking to one of our staff yesterday and they were saying they found they have to do that in between every single float right now for one of our rooms.
Ashkahn: There’s definitely a certain mystery to it too.
Graham: Even when we have identical tanks and one room has a bunch of water forming and one doesn’t.
Ashkahn: They’re the same temperature. Sometimes I’m just like, okay there’s something going on here.
Graham: We call those … in the business we call those “float mysteries”. Get used to them – is my best advice for those.
Ashkahn: This whole conversation has sounded very logical up to this point, but in reality sometimes you’re still scratching your head. Wiping it off, I haven’t found it to be, even at worst case scenario if you’re wiping it between every float. It usually seems to do the job for the course of that float.
Graham: I love having it so the drops aren’t falling on people.
Ashkahn: Which is nice.
Graham: A couple other things to keep in mind. One is this idea of using like bubble wrap type cover for your float tanks. Oftentimes we’ll find the most condensation seems to gather when people aren’t using the float tank. Especially if you’re leaving the door closed to keep in the temperature. You want to keep the water temperature warm so you close the door to the float tank, you didn’t have a floater in there in that session, next person goes in and opens it up and it’s just drip city.
Ashkahn: Yeah, why? Why?
Graham: Because you’ve creating this contained environment. Something about humans and …
Ashkahn: Where’s the person in there? Why would the person change?
Graham: Float mystery. Don’t even try to worry about it, my friend.
Ashkahn: It matches with experience, but I don’t understand.
Graham: One thing is to leave the door to the tank opened so that doesn’t happen. You get the airflow going in, but then the water in the tank will get cool, which is where you have this combo of door opened perhaps, some kind of a bubble wrapped cover in the tank to stop heat from going up.
Ashkahn: It’s kind of like a light pool cover, I guess. We call it bubble wrap because it has a lot of bubbles on it. We’re not just like saving the bubble wrap scraps from our packaging.
Graham: Right, don’t actually just throw bubble wrap in there. Much more official than that. I promise you.
Ashkahn: They’re usually blue, kind of thick plastic. I mean you’re looking up a pool cover.
Graham: Very serious. It’s very commercial, professional.
Ashkahn: Professional business.
Graham: So, anyway, that’s one of the tricks at least when you have an empty tank in between some clients. Both keeping the water warm and stopping that massive amount of humidity from gathering on the ceiling.
Ashkahn: Yeah, you know it’s just rag-stick.
Graham: You can on some tanks, depending on the construction of the fiberglass, you could also retrofit it with a heater on the ceiling, if it didn’t come with a radiant heater.
Ashkahn: Yeah, that’s true.
Graham: Not possible on all tanks. You know, if it’s double shelled fiberglass, it’s going to be really hard to do any kind of retrofitting or anything like that. In a lot of the units it is actually possible to go back and put a radiant heater on top of the float tank – which like Ashkahn mentioned before – is how Samadhi and a few other tanks control the drips on the inside there, is actually having a heater that’ll heat the ceiling enough that it just kind of evaporates that water or stops it forming, which kind of is like the most surefire way to stop this from forming. Other than stick-rag, which obviously is without saying the best solution.
Ashkahn: Or, more insulation is a nice easy step. See if that works.
Graham: So, good luck. Good luck with the drops out there on your ceiling. Again even if you have to wipe it in between every person, the most important thing is just even if there’s humidity forming try to make sure it’s not falling on your customers. That’s where it starts to cause trouble.
Ashkahn: Okay. If you guys have more questions for us go over to floattanksolutions.com/podcast and just type them right into there.
Graham: Yup, those will go straight into our trash folder and we’ll make up our own questions from there. All right talk to you all tomorrow.
Recent Podcast Episodes
Benefits of a Free Float Giveaway – DSP 315
Float On has been known throughout the years for pulling off outlandish marketing stunts with mixed success. For example, we ran a giveaway on social media back in 2014 for a full year of free floats to our lucky winner.
Derek and Ashkahn provide a follow up on the success of that campaign and talk about the primary, secondary, and tertiary benefits that came from doing such a major giveaway.
The Importance of Social Media – DSP 314
Social media seems to be the only marketing platform that anyone talks about anymore. How to do facebook ads, when to post on Instagram, how to improve Google SEO… it’s a broad topic that seems to dominate the conversation in marketing.
Ashkahn and Derek explain not only why it seems this way, but the misconception of relying too heavily on social media in marketing strategies, as well as a defense of social media as a platform.
How to not be salesy selling memberships – DSP 313
Derek and Ashkahn give the low down on pitching memberships to customers. A lot of float center owners don’t want to come off as pushy sales people after people get out of their floats.
Ashkahn sympathizes with this a lot, since that’s exactly how he felt when he first started selling memberships for Float On. He and Derek suggest a perspective shift on the idea of memberships, as lots of customers end up being appreciative of the opportunity, and don’t feel like they’re being overly pitched to.
Why is Water Treatment Important? – DSP 312
If float tank water is safe, in part because of all the salt, then why is there such a huge emphasis in the industry for water treatment? After all, there haven’t been any reports of anyone getting sick because of floating.
Ashkahn and Graham tackle this question and challenge the idea on its face, because, well, just because something hasn’t been reported doesn’t mean it doesn’t happen, and given how little is known about water treatment in float tanks, it’s a good idea, as an industry, to minimize the risk of infections and illness as much as possible. Really, there’s a lot of reasons, from peace of mind, complying with health regulation standards, and even marketing, to maintain your float tank solution to as high a standard that you can.
Soundproofing Windows of Your Float Center – DSP 311
Graham and Ashkahn discuss soundproofing windows of a float center, but first they talk about which situations may even warrant soundproofing in the first place. It may be that soundproofing is better prioritized elsewhere.
If you do decide to soundproof your window, the guys give you some tips on how best to do it and what to look for when picking out which type of glaze you may want along with a few other options.
Latest Blog Posts
What? Another Product Announcement? The New and Improved About Float Tanks Guide!
We’ve learned a lot since then, so has the industry and the rest of the world. Floating is no longer considered some obscure practice. The industry has become very well established the world over and is continuing to grow. As such, the About Float Tanks Guide in particular desperately needed updating.
There has been new research, new standards in manufacturing, and as an industry, we have a much better understanding of all things float tank.
Download the latest version today!
Announcing: The 2017 Float Tank Industry Report
In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We've released one every year since, and this year we (once again) have the most contributions that we've ever had. In total, 193 existing...
Working with a Landlord
If you’re planning on opening up a float center, it’s likely that you’ll end up renting and, therefore, working closely with a landlord. Like any business relationship, it takes communication, discernment, and openness to make a renter-landlord relationship feel truly comfortable.
Everyone involved is taking a risk and the reality is that, when it comes to floating, it’s probably more risk than your average small business – craft shop, bar, hair salon, law office, what-have-you.
This piece also includes a free download – a compilation of support letters from float center landlords!
Employees vs. Independent Contractors. Which is better when offering additional services?
Part of what makes all of this so confusing is there isn’t a one-size-fits-all set of actions that differentiates a standard employee from an independent contractor. Your State regulators, the federal Department of Labor, and the IRS all have their own criteria for what constitutes an “independent contractor”. Here, we’ll just be using the IRS definitions as a sort of jumping off point to the issue. If the status of employees is ever challenged, the IRS determines the status on a case-by-case basis over several criteria by a panel of judges, very similar to American Idol.
Basically it comes down to who is in control of the work. How much control does the company have over the type of job being done vs. how much control does the person providing the service. This manifests in different ways, but to fit the definition of an independent contractor, a service provider really does have to be independent. Beyond just using this guide, you should always consult an HR lawyer if you feel like there’s any confusion or ambiguity.
Basically, the rules fall into three main categories…
