Something in the world of floating have you stumped?
Show Highlights
One of the biggest Float Mysteries in the industry is how to properly deal with condensation in a float tank. Your float tank is basically a giant humidity generating machine so clearly there’s going to be some condensation, but how much and why it forms can vary for seemingly no reason, making managing it difficult. The last thing any float center owner wants is for it to affect the floats they’re running (little water droplets falling on floaters is no fun).
Graham and Ashkahn commiserate with the industry about the difficulties in dealing with this particular hot topic, while also delving into the science of it and common solutions that should help any float center owner that’s facing this problem.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “I have a bunch of water drops that keep forming on the top of my float tank. What should I do to stop that?”
Ashkahn: Bummer.
Graham: So, first of all, this is really common. These things are giant humidity generating machines. So, it’s not the most surprising thing in the world that it’s forming on the ceiling there.
Ashkahn: Yeah. It happens.
Graham: The problem with this too, we should say, is not that it’s on the ceiling, it’s that mid-float you’ll get these water droplets that come down. It’s like this weird water torture where you don’t know how often or what body part it will hit.
Ashkahn: It’s pitch black.
Graham: Once every 20 minutes come down and disrupt your float.
Ashkahn: It’s pretty horrible. Once it happens, you just can’t relax anymore.
Graham: Yup.
Ashkahn: So, what causes it? What causes this condensation? What’s the condensation cause?
Graham: It’s giant humidity…? It’s a pool of water that’s kept at 94 and a half degrees.
Ashkahn: Here’s what I’m getting at: usually the condensation is either existent or especially pronounced when there’s a big temperature difference between the inside of the float tank and the outside of the float tank.
Graham: Like a soda can.
Ashkahn: Like a soda can, or like anything that holds condensation.
Graham: Like any object in the world.
Ashkahn: Various float tanks have things to try to prevent those too. From the way the ceilings are sloped to radiant heaters inside the ceilings like the Samadhi tanks have. I think some other float tanks might have that too. A lot of float tanks if they don’t have that will put a lot of insulation up at the top, things like that to all cut down on the problem. Still, if you do have a pretty serious temperature difference between the outside and the inside, which usually means colder on the outside, warmer on the inside. You’re going to get that condensation. I mean it always means that, otherwise the condensation would be on the reverse.
Graham: On the other side.
Ashkahn: When you have this situation that’s when it comes. There’s I think two big things to help deal with it. One, is humidity control. That’s part of it, is making sure that you’re trying to keep the area not extremely humid.
Graham: Even a little bit of airflow getting into the tank, hopefully not enough to disrupt the float or even be felt by the person on the inside, but just any kind of circulating air towards the top will also work to eliminate some of that condensation, which is nice.
Ashkahn: Probably the biggest thing that’s going help is keeping the room that your float tank is in warmer. Actually whatever heating system you have to heat the room, you might want to consider bumping it up a little bit and trying to equal out that temperature.
Graham: It also sometimes depends on time of year.
Ashkahn: Yeah, that’s what we find at our place.
Graham: Again with the temperature differential, winter tends to be the worse time for condensation gathering on the float tanks and causing issues. Even with kind of getting this ideal – at least with floater comfort, plus stopping condensation – interior air temperature down. We still have issues with that forming in some of our rooms and the solution we have right now is actually just checking the ceiling between every person and having basically a …
Ashkahn: Stick with a …
Graham: Rag on it. We just clean our tanks with a rag on a stick.
Ashkahn: One of those almost like a Swiffer-shaped thing.
Graham: We do that. We use a telescoping pole and go in there and get the humidity off the ceilings of the cabins just in between people. I was just talking to one of our staff yesterday and they were saying they found they have to do that in between every single float right now for one of our rooms.
Ashkahn: There’s definitely a certain mystery to it too.
Graham: Even when we have identical tanks and one room has a bunch of water forming and one doesn’t.
Ashkahn: They’re the same temperature. Sometimes I’m just like, okay there’s something going on here.
Graham: We call those … in the business we call those “float mysteries”. Get used to them – is my best advice for those.
Ashkahn: This whole conversation has sounded very logical up to this point, but in reality sometimes you’re still scratching your head. Wiping it off, I haven’t found it to be, even at worst case scenario if you’re wiping it between every float. It usually seems to do the job for the course of that float.
Graham: I love having it so the drops aren’t falling on people.
Ashkahn: Which is nice.
Graham: A couple other things to keep in mind. One is this idea of using like bubble wrap type cover for your float tanks. Oftentimes we’ll find the most condensation seems to gather when people aren’t using the float tank. Especially if you’re leaving the door closed to keep in the temperature. You want to keep the water temperature warm so you close the door to the float tank, you didn’t have a floater in there in that session, next person goes in and opens it up and it’s just drip city.
Ashkahn: Yeah, why? Why?
Graham: Because you’ve creating this contained environment. Something about humans and …
Ashkahn: Where’s the person in there? Why would the person change?
Graham: Float mystery. Don’t even try to worry about it, my friend.
Ashkahn: It matches with experience, but I don’t understand.
Graham: One thing is to leave the door to the tank opened so that doesn’t happen. You get the airflow going in, but then the water in the tank will get cool, which is where you have this combo of door opened perhaps, some kind of a bubble wrapped cover in the tank to stop heat from going up.
Ashkahn: It’s kind of like a light pool cover, I guess. We call it bubble wrap because it has a lot of bubbles on it. We’re not just like saving the bubble wrap scraps from our packaging.
Graham: Right, don’t actually just throw bubble wrap in there. Much more official than that. I promise you.
Ashkahn: They’re usually blue, kind of thick plastic. I mean you’re looking up a pool cover.
Graham: Very serious. It’s very commercial, professional.
Ashkahn: Professional business.
Graham: So, anyway, that’s one of the tricks at least when you have an empty tank in between some clients. Both keeping the water warm and stopping that massive amount of humidity from gathering on the ceiling.
Ashkahn: Yeah, you know it’s just rag-stick.
Graham: You can on some tanks, depending on the construction of the fiberglass, you could also retrofit it with a heater on the ceiling, if it didn’t come with a radiant heater.
Ashkahn: Yeah, that’s true.
Graham: Not possible on all tanks. You know, if it’s double shelled fiberglass, it’s going to be really hard to do any kind of retrofitting or anything like that. In a lot of the units it is actually possible to go back and put a radiant heater on top of the float tank – which like Ashkahn mentioned before – is how Samadhi and a few other tanks control the drips on the inside there, is actually having a heater that’ll heat the ceiling enough that it just kind of evaporates that water or stops it forming, which kind of is like the most surefire way to stop this from forming. Other than stick-rag, which obviously is without saying the best solution.
Ashkahn: Or, more insulation is a nice easy step. See if that works.
Graham: So, good luck. Good luck with the drops out there on your ceiling. Again even if you have to wipe it in between every person, the most important thing is just even if there’s humidity forming try to make sure it’s not falling on your customers. That’s where it starts to cause trouble.
Ashkahn: Okay. If you guys have more questions for us go over to floattanksolutions.com/podcast and just type them right into there.
Graham: Yup, those will go straight into our trash folder and we’ll make up our own questions from there. All right talk to you all tomorrow.
Recent Podcast Episodes
Monthly Budget for Float Centers – DSP 305
Graham and Ashkahn break down the real truth about how closely they watch their budget for Float On on a monthly basis.
The truth is… not much. As it turns out, monthly expenses for float centers don’t have huge variations unlike businesses that rely on retail, for example. Graham and Ashkahn explain they developed a sense for what’s within reason.
How to Sign on Float Ambassadors – DSP 304
Float Ambassadors have been with the industry since the beginning, but gained popularity sometime in the last few years. What are ambassadors and how to float centers find them? When they do find them, how do they get them to represent floating?
Graham and Ashkahn share their experiences with the practice of finding float mavens out in the world and the impact they’ve had on Float On.
How do you Talk about Psychedelics? – DSP 303
It’s no secret that the inventor of the float tank, John Lilly, was also an early psychonaut and used the tank for mental exploration in conjunction with LSD. Not everyone in the float community appreciates this shared history and some actively try to distance themselves from it given the taboo nature of psychedelics.
Graham and Ashkahn share their thoughts on psychedelics and floating and how, as a business, they can be completely separated while still being important, as well as explaining why some people might reasonably decide to disassociate from them.
What About 75 Minute Floats? – DSP 302
Most float centers divide on floats offered between 60 or 90 minute floats, but some split the difference right down the middle and offer 75 minutes. Graham and Ashkahn share their thoughts on this tactic, what they see as the pros, cons, and things to consider when implementing it.
Free Floats for Teachers – DSP 301
Graham and Ashkahn give their perspective on the pros and cons of giving free floats away for teachers. Giving out free floats is the Float On way and giving them to a specific group of people who could really use them sounds like a good idea.
The guys break it down and address some of the concerns any float center may have about running a program like this.
Latest Blog Posts
The Basics of Float Tank Sanitation
Some of the most common questions you’ll get as a float center operator involve the cleanliness of the tanks. This post will be an introduction to some of the most commonplace sanitation methods used in float tanks. These are generally either chemicals that go in the water or devices that attach to your filtration system. We’ll be discussing chlorine, bromine, ozone, UV, and hydrogen peroxide, which accounts for the sanitation methods used on nearly every float tank on the market.
Testing and Maintaining Float Tank Water Quality
Editors Note: This is a revision of a past blog post, updated to reflect the most current sanitation methods and standards
In a perfect world, you could just pour water and salt into a float tank and it would stay pure and clean and fresh and salty forever. In the real world, conditions in the water are constantly changing, so keeping your water safe and clean takes a fair amount of vigilance.
This post covers how we maintain basic water quality in the float tank, except for sanitization methods, which will be covered in their own beastly sanitation blog post. Stay tuned for that coming out next week!
Floating, mental health, and wellness
This post will explore the intersection of floating with the concepts, beliefs, and experiences related to mental health and wellness, with a focus on anxiety and depression. I’ll explore my own story as it relates to floating before diving into the current intersections of floating and mental health, with a look at past, current, and potential opportunities for research and personal growth.
Massage, Acupuncture, and Float Tanks… A Chat with Sandra Calm
We’ve seen lots of float centers that aren’t just float centers.
Many have massage, some offer counseling, some have yoga classes next door. Lots of people start out either by incorporating float tanks into a larger business, or with float tanks only being one of many modalities at their center. Being specialists in floating, Float On has not mastered anything else.
So, to help gain insight into this growing aspect of the industry, we contacted our old friend, Sandra Calm. She started up The Float Shoppe here in Portland with her husband and podcast sensation, Dylan Calm, back in 2011. When they first opened, they had just two float tanks, and slowly added acupuncture, massage, counseling, along with two more tanks. Talk about expansion!
She was more than happy to take some time for the industry to help us understand just what it’s like to run a center with multiple services by answering some questions.
