Something in the world of floating have you stumped?
Show Highlights
Time management and maintaining your schedule is one of the most important quality controls in a float center. If you can’t get people out on time, it can throw off your schedule for the rest of the day. So, when does a float start? How do you measure that time? And what do you do if a floater starts late? Cut off their float? The next persons?
Graham and Ashkahn have been running Float On in a particular way for a long time now, and have particular insights into the challenges of how you manage your schedule.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “when does a float start? When the shower starts? When they get out of the tank? Also, how to handle when people are late, or talking too much. I have a few chatty guests who throw the time off.”
Ashkahn: When does a float start? It’s one of those questions I hope our customers never ask.
Graham: You’re gonna say a Sophist kind of question, like “what’s the sound of one hand clapping?” When does a float start?
Ashkahn: Yeah, if the float starts and no one’s in the tank, is it really started?
Graham: Time is just an illusion, so … So, we … I guess it’s probably different for different centers, as well.
Ashkahn: It is different.
Graham: The way that we do it at Float On, is the timing for the floats just starts at whatever time the appointment starts at. And it ends a half an hour before the next client needs to come in.
Ashkahn: So, we’re kind of … yeah, we’re lying to people a little bit.
Graham: But, we also try to get people in early, so let’s back up from there. So, basically, if there’s a 9:00pm float, the 90 minutes for a 90-minute float starts at 9:00pm. Which means at 10:30, the music’s gonna come on. And for us, the reason that we do that is because, in order to keep our schedule, we just need to make sure that the music comes on at a certain time, so we have time to change over our rooms. And part of that’s because we stay busy, and another part of that is because we have all of our floats starting at the exact same time.
Ashkahn: Which is six tanks. So we’re doing a six-tank turnover in that 30 minutes.
Graham: Which means timing ends up being really important for us, so our decision starts at the fact we need that music to go on at, for a 9:00pm float, 10:30. Which means we kind of don’t have wiggle room for waiting for people to get in the tank, or measuring exactly when they shut the door to the float tank and lay down, or anything like that.
Ashkahn: So, unfortunately, for us, it’s really … if you go into your room at nine o’clock, you’re still showering and all that stuff, so your float’s probably actually only like 85 minutes, or something like that. And double unfortunately, especially if it’s your first time and we gotta go in and give you the whole walkthrough speech and everything, that cuts into that time, too. And, by the same token, if people come early, like you were saying … Especially our regulars, will show up five, ten minutes early. It depends on which room, some of our rooms get finished 10 minutes before the mark, some get finished right at the mark, stuff like that. But, if they’re early and the room’s ready, we’ll throw them in there, and they might get longer than 90 minutes.
Graham: Yeah. And some of our members are actually really smart about just trying to optimize their tank time, too. I know at least two of them that come in pre-showered. Like, they shower at their house before they come into Float On so they don’t have to waste early float time showering there.
Ashkahn: That’s funny.
Graham: Yeah.
Ashkahn: And this really might vary a lot from center to center, but at our center, unfortunately, there’s probably a chance a lot of people aren’t actually getting 90 minutes inside the float tank, because of that shower time and the way that our schedule runs and everything. But, even despite that, it’s very rarely brought up. It’s really not that often that a customer will even ask us what their time is based on, or when it counts as started.
Graham: And when we start to bring it up, too, I just kind of give them this stern, disapproving look and they usually just sort of drop it.
Ashkahn: Kick them out.
Graham: It’s what happens to floaters who ask questions.
Ashkahn: And it might be one of the benefits of having 90-minute sessions over 60-minute sessions. Like, I think people are kind of sweating the exact minutes a lot less at 90 minutes than they do for 60 minutes. Like, 55 minutes instead of 60 is kind of a bigger deal. And, I find the same thing for our two-and-a-half hour float, it’s almost nobody cares if they’re getting in five minutes late, or something like that.
Graham: Yeah, I was just gonna mention that our late night floats are definitely an extension of them.
Ashkahn: Yeah, no one’s counting the minutes on their clock to get in there for those two-and-a-half hours.
Graham: That’s a good point, actually. I hadn’t thought about the difference between the 60 and 90. It probably is a little more important to have your schedule really honed in on getting them that full 60 minutes when you’re doing them.
Ashkahn: Yeah. And, in terms of the second part of the question, what do you do if someone’s super chatty, or something like that? The nice thing is, if someone’s super chatty and they’re eating into their own time, they’re usually the type of person who doesn’t care. Or, they’re kind of doing it to themselves, and I think they recognize that a little bit.
Graham: Yep. And this is also assuming that you’re going with our model of just starting everything, and it’s over when that start time has reached its end.
Ashkahn: Which is true, there’s a lot of places that don’t do that, and a lot of float tanks come not set to operate like that, right? Like, a lot of float tanks come with this thing where you hit “start float session.” And from the moment you hit that button, times out whatever your thing is, 90 minutes, or 90 minutes and then music, or whatever your custom setup is.
Graham: Yeah. And again, if your schedule’s not really packed, then obviously, you have a little more leeway with how nice you can be with people. If there’s not someone coming in immediately afterwards, that loosens up some of the restrictions, but to a certain extent, your hands are kind of tied. Either you can increase the length of your transitions in order to allow for the full float time of what’s booked. You can just advertise 80-minute floats or something, if you want to be totally accurate, and when people do get 90- or 95-minute floats, it’s just kind of icing on the cake.
There’s some options, but yeah, just the realities of needing to get people in on time, and the fact that when you turn on music for the people who were in there previously, they don’t always get out on time. So, keeping everything on a fixed schedule. Again, at least in our center, we haven’t really found a way to get outside of that, so it’s sort of an unnecessary, or unfortunate, necessity.
Ashkahn: And same thing for if people are late, I think was maybe the other part of the question. Unfortunately, at our place, they just get a shorter float time. We can’t really leave them in there for longer and throw off our entire routine and everything else. And really, I think this is something that’s not super conventional at every float center doing it the same way. I think really, it is, the way you set up, and exactly how busy you are, and what your timing is, and if your schedule is on a very fixed schedule. So, what you’re hearing from us is an extremely rigid, fixed structure, like all our floats start at the same time, they start at very specific times. There’s very little flexibility in the way that our schedule runs. And because of that limited flexibility, it means things like this. If people are late, they get shorter floats. If people are chatty, they get shorter floats. If we get them in late, they get shorter floats. Which is unfortunate.
Graham: Although, that’s the case where we’ll actually try to accommodate them as well.
Ashkahn: Right.
Graham: As much as possible. It’s like, okay, well, we’ll try to add an extra five minutes on to the end of your float, or something like that. All right. Yeah, there you have it.
Ashkahn: All right, if you guys have more questions, you can hop over to floattanksolutions.com/podcast, and we’ll answer them.
Recent Podcast Episodes
How to get your Water Tested – DSP 359
Every once in a while during float industry events, during this podcast, or talks given by health department professionals and the like, they’ll say something like “if you get your water tested and…”. But how does a float center do that? Where should they look? Is there just a lab that they can send their float solution to? Are all labs the same? How much does it cost?
Ashkahn and Graham take on the difficult task of making sense of microbiology testing laboratories, regulatory institutions, and acronyms, all so you don’t have to.
A Few of Our Favorite Things – DSP 358
Graham and Ashkahn take a break from all the doom and gloom of the float world to talk about the amazing things that floating has brought them. What they love, the things that surprised them, and the many ways in which they’re inspired to stick with it and pioneer in this wild and crazy industry.
Learning to Trust Your Gut in Business – DSP 357
Sometimes, the hardest part of starting any project is to just take the leap of faith complete step one.
With some words of encouragement and caution, Graham & Ashkahn channel their inner Tony Robbins and encourage a highly knowledgeable aspiring float center owner, to trust their gut and start their float center.
How Long to Run a Filter Between Floats – DSP 356
How long should you run the filtration system for between floats? It’s an eternal question that has plagued float center owners since the dawn of time (Or at least until 1978 when the first float center opened up).
Ashkahn and Graham break down the science behind why you should filter for as long as you do and how to properly plan for it. This densely packed episode is filled to the brim with a summary of knowledge on water dilution, filtration, flow meters, and water sanitation brought over to float tanks from the pool and spa world. Take notes as you listen, there’s a lot to assess.
How to Reward your Employees – DSP 355
Recognizing that your employees rock is one of the most valuable traits an employer can have, but only as long as said employer is able to properly acknowledge that appreciation.
Graham and Ashkahn share their take on rewarding employees for their hard work and how to make it count when you want to give them a gift. The duo has no shortage of examples of how they’ve shown their appreciation at Float On, and this episode is dense with examples of nice gifts and rewards to provide staff, from the practical to the symbolic.
Latest Blog Posts
B-Gray’s School on Nothing
I Got Nothing to Say! Okay, so here’s the thing. Floating is often associated with meditation and ultimately achieving this state of void, commonly and perhaps glibly referred to as “Nothing” by salty tank proprietors everywhere. And listen, I’m totally on board with...
The Daily Solutions Podcast – Our Top 5 Episodes for October
October was a hell of a floaty month. Between the float conference non-profit, Float On’s birthday, Ashkahn’s birthday, and Halloween, let’s just be a little grateful that the ol’ Grashkahmn duo didn’t miss a day on here. Especially since these episodes are so killer....
When (and how) Salt Attacks!
This post was spurred on by work that I did illustrating hundreds of pages for our Construction Packet. As an illustrator, I spend extra time nailing down details, just to eliminate potential sources of confusion. While looking into salt weathering, I came across some...
The Daily Solutions Podcast – Our Top 5 Episodes from September
September came and went like a flash, while everyone was recovering from the whirlwind that was the Float Conference, Graham and Ashkahn were fielding questions about all things great and small in the industry. Here’s a handful of our favorites. When is the Best Time...
