Something in the world of floating have you stumped?
Show Highlights
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Show Resources
The Thermoworks Reference Thermometer (Tommy 65,000)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “what type of thermometer do you use?”
Ashkahn: Thermometer.
Graham: Yup. To make the perfect turkey. No, no I assume they mean in your float tank. They didn’t specify.
Ashkahn: Well, we use a handheld thermometer. There’s thermometers in the float tanks, each one it comes with a little thing to tell you the temperature.
Graham: Yeah.
Ashkahn: But, we like having another external handheld thermometer that we use. Because one, we have a variety of models of float tank in our center. So it’s nice for us to have one device we can use from tank to tank, to tank to get a more consistent read out across all of them.
Graham: Yup. It ends up just being nice to also be able to have those around and double check things and just compare. We actually use ones that end up being really precise in their measurements too. So, reference thermometers are actually what they’re called.
We get one that goes down to +/- 0.08 degrees so under point one degrees of accuracy, which often next steps up there get to 0.8 degrees of accuracy is a really common one that you see. At that point it means when you measure you’re within 1.6 degrees of what you think you’re measuring. It’s not a good range, you know.
Ashkahn: What, do you remember? The company’s called ThermoWorks. Do you remember what the actual model of the one we use is?
Graham: Here, I can look it up. Keep … Stall, stall!
Ashkahn: All right. The other nice thing about thermometers is that, if you don’t know if it’s cold or hot, that’s how you figure it out. You use a thermometer. And …
I should say a few things about these thermometers because while we’re tell you the model of the one that we have. It certainly is not perfect. It helps us to be accurate. It breaks on us all the time. It is meant to be kind of water resistant, but it doesn’t seem to be actually able to hold up to the onslaught of water and salt that even when we try to be careful somehow makes its way up the probe into the electronics and eventually they die on us. So, we have two of these one hand at any given point in time because we’re used to one breaking down to the point where we need to send it in for repairs. We’re constantly sending one of these in for repairs.
Graham: Here’s a pro tip too. I recommend naming all of your fragile objects in your shop because it makes people care about them more. This is our theory at least.
Ashkahn: Yeah, we tried naming them. We even tried putting googly eyes on them. Really getting people to have a sentimental attachment to the thermometers so that they wouldn’t be as willing to treat them in a way that would break them, but it still didn’t … If anything it’s made us realize we kill a lot of thermometers. We’ve gone from Tommy to Tuppins to …
Graham: Back to Tommy again.
Ashkahn: Back to Tommy.
Graham: That’s where we are again.
I looked it up. I nailed it before. It’s just their reference thermometer.
Ashkahn: That’s it. It’s just called the ThermoWorks reference thermometer.
Graham: Their handheld reference thermometer, yup.
Ashkahn: Is there like a number? 6500.
Graham: Let’s see. I don’t see a number.
Ashkahn: Okay, well it should be called the 6500. It should have a cool name like that.
Graham: I’ll bring that up with … Here the SKU number’s THS222-555.
Ashkahn: Nice. That sounds way more slick.
Graham: Yeah, it just rolls off the tongue, you know. That’s what we use. We use the THS222-555.
Ashkahn: How much is it?
Graham: Three hundred bucks.
Ashkahn: Three hundred bucks.
Graham: But, the nice thing is when it breaks down, we don’t have to pay that for an entirely new thermometer. We actually just send it back to the company for repairs. Oftentimes it’s the probe that needs to be replaced or the battery pack got corroded. They can just replace those elements.
Ashkahn: For a small fee.
Graham: Like under a hundred bucks, I think.
Ashkahn: But, yeah it still adds up as an expense. It’s a recurring expense for us is keeping working thermometers.
Graham: Yeah. I mean it’s a good lesson I guess, beyond just thermometers too; is not much that’s electronic is long for this world in a float tank center.
Ashkahn: I guess the other thing to mention with thermometers is even if you have the most accurate thermometer in the world you still have to deal with the fact that the water in the float tank might not be uniform. You might be measuring in a spot that is slightly warmer than another spot and it’s not mixed up. Maybe the pump just was running and it heated the water up a little bit. It’s not necessarily the only thing to consider with temperature. There’s just kind of a lot of uncontrollable variables or variables that throw the numbers off a little bit even if you have an incredibly accurate thermometer.
Graham: Yeah, unless you get five of them and make sort of a little grid of probes that you put down across the water at different depths and then write a computer program to kind of take the averages.
Ashkahn: I should say too we have those laser gun thermometers, you know? You know, what I’m talking about?
Graham: Oh, I know what you’re talking about. The old laser therms.
Ashkahn: The laser guns. Those don’t seem to work very well.
Graham: Yeah, at all really.
Ashkahn: We got one and we tested it. They don’t really work at all.
Graham: We actually confirmed that with the ThermoWorks thermometer company as well. You know, they were pretty much saying getting readings off of the water with the refraction of the salt and just everything going on, you’re not going to be able to measure it and they’re not even that accurate.
Ashkahn: No, even for the things they’re meant to be used for, they’re not really like the most accurate of things.
Graham: They measuring ranges of hundreds of degrees for really … When you’re HVAC system heats up and different things like that, not 0.1 degrees.
Ashkahn: So, it’s tempting, once we started breaking these it’s like something that can take a temperature from a distance sounds really great. But, did not seem to actually be the solution.
Graham: Yup. And, definitely if you are choosing out your own thermometer, obviously there’s many companies that offer these, but definitely take a look at that precision amount. In my mind, again anything that’s above 0.1 degrees is a little too high.
All right.
Ashkahn: Done.
Graham: Sha-bam. Thanks for the question and if you have your own, send them to floattanksolutions.com/podcast.
Recent Podcast Episodes
Benefits of a Free Float Giveaway – DSP 315
Float On has been known throughout the years for pulling off outlandish marketing stunts with mixed success. For example, we ran a giveaway on social media back in 2014 for a full year of free floats to our lucky winner.
Derek and Ashkahn provide a follow up on the success of that campaign and talk about the primary, secondary, and tertiary benefits that came from doing such a major giveaway.
The Importance of Social Media – DSP 314
Social media seems to be the only marketing platform that anyone talks about anymore. How to do facebook ads, when to post on Instagram, how to improve Google SEO… it’s a broad topic that seems to dominate the conversation in marketing.
Ashkahn and Derek explain not only why it seems this way, but the misconception of relying too heavily on social media in marketing strategies, as well as a defense of social media as a platform.
How to not be salesy selling memberships – DSP 313
Derek and Ashkahn give the low down on pitching memberships to customers. A lot of float center owners don’t want to come off as pushy sales people after people get out of their floats.
Ashkahn sympathizes with this a lot, since that’s exactly how he felt when he first started selling memberships for Float On. He and Derek suggest a perspective shift on the idea of memberships, as lots of customers end up being appreciative of the opportunity, and don’t feel like they’re being overly pitched to.
Why is Water Treatment Important? – DSP 312
If float tank water is safe, in part because of all the salt, then why is there such a huge emphasis in the industry for water treatment? After all, there haven’t been any reports of anyone getting sick because of floating.
Ashkahn and Graham tackle this question and challenge the idea on its face, because, well, just because something hasn’t been reported doesn’t mean it doesn’t happen, and given how little is known about water treatment in float tanks, it’s a good idea, as an industry, to minimize the risk of infections and illness as much as possible. Really, there’s a lot of reasons, from peace of mind, complying with health regulation standards, and even marketing, to maintain your float tank solution to as high a standard that you can.
Soundproofing Windows of Your Float Center – DSP 311
Graham and Ashkahn discuss soundproofing windows of a float center, but first they talk about which situations may even warrant soundproofing in the first place. It may be that soundproofing is better prioritized elsewhere.
If you do decide to soundproof your window, the guys give you some tips on how best to do it and what to look for when picking out which type of glaze you may want along with a few other options.
Latest Blog Posts
What? Another Product Announcement? The New and Improved About Float Tanks Guide!
We’ve learned a lot since then, so has the industry and the rest of the world. Floating is no longer considered some obscure practice. The industry has become very well established the world over and is continuing to grow. As such, the About Float Tanks Guide in particular desperately needed updating.
There has been new research, new standards in manufacturing, and as an industry, we have a much better understanding of all things float tank.
Download the latest version today!
Announcing: The 2017 Float Tank Industry Report
In 2014 we started gathering answers to a survey that would eventually become the very first State of the Float Industry Report. We've released one every year since, and this year we (once again) have the most contributions that we've ever had. In total, 193 existing...
Working with a Landlord
If you’re planning on opening up a float center, it’s likely that you’ll end up renting and, therefore, working closely with a landlord. Like any business relationship, it takes communication, discernment, and openness to make a renter-landlord relationship feel truly comfortable.
Everyone involved is taking a risk and the reality is that, when it comes to floating, it’s probably more risk than your average small business – craft shop, bar, hair salon, law office, what-have-you.
This piece also includes a free download – a compilation of support letters from float center landlords!
Employees vs. Independent Contractors. Which is better when offering additional services?
Part of what makes all of this so confusing is there isn’t a one-size-fits-all set of actions that differentiates a standard employee from an independent contractor. Your State regulators, the federal Department of Labor, and the IRS all have their own criteria for what constitutes an “independent contractor”. Here, we’ll just be using the IRS definitions as a sort of jumping off point to the issue. If the status of employees is ever challenged, the IRS determines the status on a case-by-case basis over several criteria by a panel of judges, very similar to American Idol.
Basically it comes down to who is in control of the work. How much control does the company have over the type of job being done vs. how much control does the person providing the service. This manifests in different ways, but to fit the definition of an independent contractor, a service provider really does have to be independent. Beyond just using this guide, you should always consult an HR lawyer if you feel like there’s any confusion or ambiguity.
Basically, the rules fall into three main categories…
