Something in the world of floating have you stumped?
Show Highlights
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Show Resources
The Thermoworks Reference Thermometer (Tommy 65,000)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “what type of thermometer do you use?”
Ashkahn: Thermometer.
Graham: Yup. To make the perfect turkey. No, no I assume they mean in your float tank. They didn’t specify.
Ashkahn: Well, we use a handheld thermometer. There’s thermometers in the float tanks, each one it comes with a little thing to tell you the temperature.
Graham: Yeah.
Ashkahn: But, we like having another external handheld thermometer that we use. Because one, we have a variety of models of float tank in our center. So it’s nice for us to have one device we can use from tank to tank, to tank to get a more consistent read out across all of them.
Graham: Yup. It ends up just being nice to also be able to have those around and double check things and just compare. We actually use ones that end up being really precise in their measurements too. So, reference thermometers are actually what they’re called.
We get one that goes down to +/- 0.08 degrees so under point one degrees of accuracy, which often next steps up there get to 0.8 degrees of accuracy is a really common one that you see. At that point it means when you measure you’re within 1.6 degrees of what you think you’re measuring. It’s not a good range, you know.
Ashkahn: What, do you remember? The company’s called ThermoWorks. Do you remember what the actual model of the one we use is?
Graham: Here, I can look it up. Keep … Stall, stall!
Ashkahn: All right. The other nice thing about thermometers is that, if you don’t know if it’s cold or hot, that’s how you figure it out. You use a thermometer. And …
I should say a few things about these thermometers because while we’re tell you the model of the one that we have. It certainly is not perfect. It helps us to be accurate. It breaks on us all the time. It is meant to be kind of water resistant, but it doesn’t seem to be actually able to hold up to the onslaught of water and salt that even when we try to be careful somehow makes its way up the probe into the electronics and eventually they die on us. So, we have two of these one hand at any given point in time because we’re used to one breaking down to the point where we need to send it in for repairs. We’re constantly sending one of these in for repairs.
Graham: Here’s a pro tip too. I recommend naming all of your fragile objects in your shop because it makes people care about them more. This is our theory at least.
Ashkahn: Yeah, we tried naming them. We even tried putting googly eyes on them. Really getting people to have a sentimental attachment to the thermometers so that they wouldn’t be as willing to treat them in a way that would break them, but it still didn’t … If anything it’s made us realize we kill a lot of thermometers. We’ve gone from Tommy to Tuppins to …
Graham: Back to Tommy again.
Ashkahn: Back to Tommy.
Graham: That’s where we are again.
I looked it up. I nailed it before. It’s just their reference thermometer.
Ashkahn: That’s it. It’s just called the ThermoWorks reference thermometer.
Graham: Their handheld reference thermometer, yup.
Ashkahn: Is there like a number? 6500.
Graham: Let’s see. I don’t see a number.
Ashkahn: Okay, well it should be called the 6500. It should have a cool name like that.
Graham: I’ll bring that up with … Here the SKU number’s THS222-555.
Ashkahn: Nice. That sounds way more slick.
Graham: Yeah, it just rolls off the tongue, you know. That’s what we use. We use the THS222-555.
Ashkahn: How much is it?
Graham: Three hundred bucks.
Ashkahn: Three hundred bucks.
Graham: But, the nice thing is when it breaks down, we don’t have to pay that for an entirely new thermometer. We actually just send it back to the company for repairs. Oftentimes it’s the probe that needs to be replaced or the battery pack got corroded. They can just replace those elements.
Ashkahn: For a small fee.
Graham: Like under a hundred bucks, I think.
Ashkahn: But, yeah it still adds up as an expense. It’s a recurring expense for us is keeping working thermometers.
Graham: Yeah. I mean it’s a good lesson I guess, beyond just thermometers too; is not much that’s electronic is long for this world in a float tank center.
Ashkahn: I guess the other thing to mention with thermometers is even if you have the most accurate thermometer in the world you still have to deal with the fact that the water in the float tank might not be uniform. You might be measuring in a spot that is slightly warmer than another spot and it’s not mixed up. Maybe the pump just was running and it heated the water up a little bit. It’s not necessarily the only thing to consider with temperature. There’s just kind of a lot of uncontrollable variables or variables that throw the numbers off a little bit even if you have an incredibly accurate thermometer.
Graham: Yeah, unless you get five of them and make sort of a little grid of probes that you put down across the water at different depths and then write a computer program to kind of take the averages.
Ashkahn: I should say too we have those laser gun thermometers, you know? You know, what I’m talking about?
Graham: Oh, I know what you’re talking about. The old laser therms.
Ashkahn: The laser guns. Those don’t seem to work very well.
Graham: Yeah, at all really.
Ashkahn: We got one and we tested it. They don’t really work at all.
Graham: We actually confirmed that with the ThermoWorks thermometer company as well. You know, they were pretty much saying getting readings off of the water with the refraction of the salt and just everything going on, you’re not going to be able to measure it and they’re not even that accurate.
Ashkahn: No, even for the things they’re meant to be used for, they’re not really like the most accurate of things.
Graham: They measuring ranges of hundreds of degrees for really … When you’re HVAC system heats up and different things like that, not 0.1 degrees.
Ashkahn: So, it’s tempting, once we started breaking these it’s like something that can take a temperature from a distance sounds really great. But, did not seem to actually be the solution.
Graham: Yup. And, definitely if you are choosing out your own thermometer, obviously there’s many companies that offer these, but definitely take a look at that precision amount. In my mind, again anything that’s above 0.1 degrees is a little too high.
All right.
Ashkahn: Done.
Graham: Sha-bam. Thanks for the question and if you have your own, send them to floattanksolutions.com/podcast.
Recent Podcast Episodes
Our Top 10 Marketing Book Suggestions! – DSP 255
Alright, this is a dense episode. Ashkahn is busy planning the Float Conference still, so Derek and Graham nerd out on marketing books (and blogs, and podcasts) to give the industry some of their top recommendations for marketing books that might be helpful for the float industry (or anyone, really).
Check the resource in this episode for links to all their recommendations!
What About Instagram? – DSP 254
Facebook gets a lot of attention on this podcast when it comes to talking about marketing on social media, but what about Instagram? It seems to be getting more and more popular, are Instagram ads just as good as Facebook then? Why or why not?
Derek tackles this question with Graham in tow and explains the nuances of the different platforms and why you’d post on one and not the other, despite that they are both owned by the same company.
Should I Change the Name of the Float Center I Bought? – DSP 253
Is it a good idea to change the name of a float center after buying it from someone else? As the industry gets older, more and more people are going to have to answer this question.
Branding is definitely part of the equity of a business and you purchase everything that comes with it. But can you put a price on being happy with your business and making it feel like your own?
Derek and Graham tackle these questions while Ashkahn is away for the Conference.
What’s a Marketing Funnel? – DSP 252
Graham and Derek break down the ins and outs of what, exactly, a marketing funnel is and how to develop one when speaking to banks and investors.
If this is something you don’t understand, you’re not alone! Graham consistently explains how a marketing funnel works in the Apprenticeship every year to a bewildered class. Don’t be afraid to take notes and ask questions.
How to Make Great Videos for Social Media – DSP 251
Derek and Graham talk about video content, and how to use it effectively on social media. There’s a lot of wisdom in keeping videos short and to the point, but they also recommend keeping them low tech (unless you can go really high tech).
Derek also issues a challenge for every float center listening, by September, everyone should go out and film a testimonial video and post it on social media. If you do, let Derek know by sharing it with the Float Tank Solutions facebook page.
Latest Blog Posts
2016 Float Conference Program Introduction
It’s been my pleasure to write the introduction to the conference program for five years in a row, and each year I enjoy posting it up on this blog for everyone who didn’t make it out. I hope to see you all in 2017! – Graham
The Float Tour Blog – Issue #16
We finally took this trip international! Explaining Float Tour to the border guards was a little bit of a challenge (especially through the language barrier), but – after some creative hand gestures and finding synonyms for “sensory” and “deprivation” – we made it through.
The Float Tour Blog – Issue #15
New York is where it’s at, and it’s arguably the busiest place on the planet. People here live fast-paced lives and rarely – if ever – have time to slow the fuck down and enjoy themselves.
Just like Jersey, people here also see skepticism as a point of pride, and take it to an even greater extreme. All of this makes New York a sort of “proving grounds” for floating: if it can make it in New York, it can make it anywhere.
The Float Tour Blog – Issue #14
The Garden State houses probably the highest concentration of float tanks on the East Coast. Jersey is a gateway to the major metropolitan areas nearby: New York City, Philadelphia, and Washington D.C.
This convenience has made Jersey the suburban hub for every major industry on the East Coast for generations, giving it the highest population density of any state in the U.S. This is fantastic for the float industry; if there’s one statistic that correlates with successful float centers, it’s population density.
