Something in the world of floating have you stumped?
Show Highlights
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Show Resources
The Thermoworks Reference Thermometer (Tommy 65,000)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “what type of thermometer do you use?”
Ashkahn: Thermometer.
Graham: Yup. To make the perfect turkey. No, no I assume they mean in your float tank. They didn’t specify.
Ashkahn: Well, we use a handheld thermometer. There’s thermometers in the float tanks, each one it comes with a little thing to tell you the temperature.
Graham: Yeah.
Ashkahn: But, we like having another external handheld thermometer that we use. Because one, we have a variety of models of float tank in our center. So it’s nice for us to have one device we can use from tank to tank, to tank to get a more consistent read out across all of them.
Graham: Yup. It ends up just being nice to also be able to have those around and double check things and just compare. We actually use ones that end up being really precise in their measurements too. So, reference thermometers are actually what they’re called.
We get one that goes down to +/- 0.08 degrees so under point one degrees of accuracy, which often next steps up there get to 0.8 degrees of accuracy is a really common one that you see. At that point it means when you measure you’re within 1.6 degrees of what you think you’re measuring. It’s not a good range, you know.
Ashkahn: What, do you remember? The company’s called ThermoWorks. Do you remember what the actual model of the one we use is?
Graham: Here, I can look it up. Keep … Stall, stall!
Ashkahn: All right. The other nice thing about thermometers is that, if you don’t know if it’s cold or hot, that’s how you figure it out. You use a thermometer. And …
I should say a few things about these thermometers because while we’re tell you the model of the one that we have. It certainly is not perfect. It helps us to be accurate. It breaks on us all the time. It is meant to be kind of water resistant, but it doesn’t seem to be actually able to hold up to the onslaught of water and salt that even when we try to be careful somehow makes its way up the probe into the electronics and eventually they die on us. So, we have two of these one hand at any given point in time because we’re used to one breaking down to the point where we need to send it in for repairs. We’re constantly sending one of these in for repairs.
Graham: Here’s a pro tip too. I recommend naming all of your fragile objects in your shop because it makes people care about them more. This is our theory at least.
Ashkahn: Yeah, we tried naming them. We even tried putting googly eyes on them. Really getting people to have a sentimental attachment to the thermometers so that they wouldn’t be as willing to treat them in a way that would break them, but it still didn’t … If anything it’s made us realize we kill a lot of thermometers. We’ve gone from Tommy to Tuppins to …
Graham: Back to Tommy again.
Ashkahn: Back to Tommy.
Graham: That’s where we are again.
I looked it up. I nailed it before. It’s just their reference thermometer.
Ashkahn: That’s it. It’s just called the ThermoWorks reference thermometer.
Graham: Their handheld reference thermometer, yup.
Ashkahn: Is there like a number? 6500.
Graham: Let’s see. I don’t see a number.
Ashkahn: Okay, well it should be called the 6500. It should have a cool name like that.
Graham: I’ll bring that up with … Here the SKU number’s THS222-555.
Ashkahn: Nice. That sounds way more slick.
Graham: Yeah, it just rolls off the tongue, you know. That’s what we use. We use the THS222-555.
Ashkahn: How much is it?
Graham: Three hundred bucks.
Ashkahn: Three hundred bucks.
Graham: But, the nice thing is when it breaks down, we don’t have to pay that for an entirely new thermometer. We actually just send it back to the company for repairs. Oftentimes it’s the probe that needs to be replaced or the battery pack got corroded. They can just replace those elements.
Ashkahn: For a small fee.
Graham: Like under a hundred bucks, I think.
Ashkahn: But, yeah it still adds up as an expense. It’s a recurring expense for us is keeping working thermometers.
Graham: Yeah. I mean it’s a good lesson I guess, beyond just thermometers too; is not much that’s electronic is long for this world in a float tank center.
Ashkahn: I guess the other thing to mention with thermometers is even if you have the most accurate thermometer in the world you still have to deal with the fact that the water in the float tank might not be uniform. You might be measuring in a spot that is slightly warmer than another spot and it’s not mixed up. Maybe the pump just was running and it heated the water up a little bit. It’s not necessarily the only thing to consider with temperature. There’s just kind of a lot of uncontrollable variables or variables that throw the numbers off a little bit even if you have an incredibly accurate thermometer.
Graham: Yeah, unless you get five of them and make sort of a little grid of probes that you put down across the water at different depths and then write a computer program to kind of take the averages.
Ashkahn: I should say too we have those laser gun thermometers, you know? You know, what I’m talking about?
Graham: Oh, I know what you’re talking about. The old laser therms.
Ashkahn: The laser guns. Those don’t seem to work very well.
Graham: Yeah, at all really.
Ashkahn: We got one and we tested it. They don’t really work at all.
Graham: We actually confirmed that with the ThermoWorks thermometer company as well. You know, they were pretty much saying getting readings off of the water with the refraction of the salt and just everything going on, you’re not going to be able to measure it and they’re not even that accurate.
Ashkahn: No, even for the things they’re meant to be used for, they’re not really like the most accurate of things.
Graham: They measuring ranges of hundreds of degrees for really … When you’re HVAC system heats up and different things like that, not 0.1 degrees.
Ashkahn: So, it’s tempting, once we started breaking these it’s like something that can take a temperature from a distance sounds really great. But, did not seem to actually be the solution.
Graham: Yup. And, definitely if you are choosing out your own thermometer, obviously there’s many companies that offer these, but definitely take a look at that precision amount. In my mind, again anything that’s above 0.1 degrees is a little too high.
All right.
Ashkahn: Done.
Graham: Sha-bam. Thanks for the question and if you have your own, send them to floattanksolutions.com/podcast.
Recent Podcast Episodes
How Many Managers Does it Take to Run a Float Center? – DSP 200
Not every float center owner wants to be tethered to working their shop for the rest of their lives. In fact, even some that enjoy that work immensely can be doing their business a disservice by focusing on day-to-day operations as opposed to dedicating their time to marketing or expansion.
So how do float center owners get out of the shop? How many managers (Or Taco Supremes as they’re called at Float On) does it take to effectively replace the shop owner at a business. Ashkahn and Graham have successfully implemented a system at Float On that allows them to be much more hands off on the business than when they first opened and they share how got to that point and how their business structure has evolved.
Float Centers in Hip Neighborhoods – DSP 199
Do float centers in the hip part of town do better than ones on the outskirts? Graham and Ashkahn are well versed on this in that Float On is in a fairly hip part of Portland.
The guys break down some of the benefits of being one of the “cool” businesses in town as well as some of the serious drawbacks. Naturally, things like foot traffic aren’t as important. Almost no one walks into a float center and hops in a tank off the street. So there are fringe benefits to it, like awareness, but if you decide on going to a different part of town, then you’re not automatically doing a disservice to your brand.
Can You Clean a Float Tank with Vinegar? – DSP 198
You have to change out your float tank water eventually. Is it a good idea to give your float tank a vinegar cleanse when you do? is that effective? Is it too much work for the results? Are there better solutions to keep your tank clean and fresh?
Graham and Ashkahn discuss while providing assurances like “either you’re not crazy or we’re all crazy”, so that’s nice.
Have you Experienced Challenging Floats? – DSP 197
Graham and Ashkahn share stories about their most challenging floats. Everything from extreme physical discomfort to literally staying in too long.
They also share stories of floats from friends and customers that they’ve accumulated over the years and discuss the value of experiencing these difficult moments in the tank and how you might approach them when one occurs at your center.
What’s the Best Representation of Float Tanks in TV or Movies? – DSP 196
It happens every once in a while, a tv show or a movie will feature a float tank and the entire industry gets a jolt as if to say “we made it to the big time!”
But not all float tank cameos are created equal, so which one does it the best? What is the best representation of floating in media? Graham and Ashkahn go through the list of everything from Altered States to Stranger Things to find out what it is.
Latest Blog Posts
Lessons for Float Centers from a Mainstream Marketing Conference
A couple of weeks ago, I had the opportunity to attend Copyblogger’s Authority Rainmaker Conference in Denver, Colorado. As a self proclaimed marketing nerd, this was an opportunity to mingle with my people. I believe no matter how much experience you have in...
A Quick Note on Insulation…
Insulating the roof/joists of your float center... Basically, what you're trying to do here to create an envelope around your space. You're trying to create a barrier between a conditioned environment (your float room) and an unconditioned environment (open air). This...
Encouraging Creativity After Floating
Most float tanks centers have customers. So as to have a place to put these customers where they will be able to sit, or stand, as they please and not be in the way, most float tank centers also have lobbies. So as to have something - some surface upon which these...
Float Center Education Through Internships
Why Have an Intern Program? I (Marshall) started my career in floating as an intern, coming in to the shop each Monday to learn about floating, sanitation, and better understand the intricacies of construction projects. For every four hours I worked, I was expected to...
