Something in the world of floating have you stumped?
Show Highlights
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Show Resources
The Thermoworks Reference Thermometer (Tommy 65,000)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “what type of thermometer do you use?”
Ashkahn: Thermometer.
Graham: Yup. To make the perfect turkey. No, no I assume they mean in your float tank. They didn’t specify.
Ashkahn: Well, we use a handheld thermometer. There’s thermometers in the float tanks, each one it comes with a little thing to tell you the temperature.
Graham: Yeah.
Ashkahn: But, we like having another external handheld thermometer that we use. Because one, we have a variety of models of float tank in our center. So it’s nice for us to have one device we can use from tank to tank, to tank to get a more consistent read out across all of them.
Graham: Yup. It ends up just being nice to also be able to have those around and double check things and just compare. We actually use ones that end up being really precise in their measurements too. So, reference thermometers are actually what they’re called.
We get one that goes down to +/- 0.08 degrees so under point one degrees of accuracy, which often next steps up there get to 0.8 degrees of accuracy is a really common one that you see. At that point it means when you measure you’re within 1.6 degrees of what you think you’re measuring. It’s not a good range, you know.
Ashkahn: What, do you remember? The company’s called ThermoWorks. Do you remember what the actual model of the one we use is?
Graham: Here, I can look it up. Keep … Stall, stall!
Ashkahn: All right. The other nice thing about thermometers is that, if you don’t know if it’s cold or hot, that’s how you figure it out. You use a thermometer. And …
I should say a few things about these thermometers because while we’re tell you the model of the one that we have. It certainly is not perfect. It helps us to be accurate. It breaks on us all the time. It is meant to be kind of water resistant, but it doesn’t seem to be actually able to hold up to the onslaught of water and salt that even when we try to be careful somehow makes its way up the probe into the electronics and eventually they die on us. So, we have two of these one hand at any given point in time because we’re used to one breaking down to the point where we need to send it in for repairs. We’re constantly sending one of these in for repairs.
Graham: Here’s a pro tip too. I recommend naming all of your fragile objects in your shop because it makes people care about them more. This is our theory at least.
Ashkahn: Yeah, we tried naming them. We even tried putting googly eyes on them. Really getting people to have a sentimental attachment to the thermometers so that they wouldn’t be as willing to treat them in a way that would break them, but it still didn’t … If anything it’s made us realize we kill a lot of thermometers. We’ve gone from Tommy to Tuppins to …
Graham: Back to Tommy again.
Ashkahn: Back to Tommy.
Graham: That’s where we are again.
I looked it up. I nailed it before. It’s just their reference thermometer.
Ashkahn: That’s it. It’s just called the ThermoWorks reference thermometer.
Graham: Their handheld reference thermometer, yup.
Ashkahn: Is there like a number? 6500.
Graham: Let’s see. I don’t see a number.
Ashkahn: Okay, well it should be called the 6500. It should have a cool name like that.
Graham: I’ll bring that up with … Here the SKU number’s THS222-555.
Ashkahn: Nice. That sounds way more slick.
Graham: Yeah, it just rolls off the tongue, you know. That’s what we use. We use the THS222-555.
Ashkahn: How much is it?
Graham: Three hundred bucks.
Ashkahn: Three hundred bucks.
Graham: But, the nice thing is when it breaks down, we don’t have to pay that for an entirely new thermometer. We actually just send it back to the company for repairs. Oftentimes it’s the probe that needs to be replaced or the battery pack got corroded. They can just replace those elements.
Ashkahn: For a small fee.
Graham: Like under a hundred bucks, I think.
Ashkahn: But, yeah it still adds up as an expense. It’s a recurring expense for us is keeping working thermometers.
Graham: Yeah. I mean it’s a good lesson I guess, beyond just thermometers too; is not much that’s electronic is long for this world in a float tank center.
Ashkahn: I guess the other thing to mention with thermometers is even if you have the most accurate thermometer in the world you still have to deal with the fact that the water in the float tank might not be uniform. You might be measuring in a spot that is slightly warmer than another spot and it’s not mixed up. Maybe the pump just was running and it heated the water up a little bit. It’s not necessarily the only thing to consider with temperature. There’s just kind of a lot of uncontrollable variables or variables that throw the numbers off a little bit even if you have an incredibly accurate thermometer.
Graham: Yeah, unless you get five of them and make sort of a little grid of probes that you put down across the water at different depths and then write a computer program to kind of take the averages.
Ashkahn: I should say too we have those laser gun thermometers, you know? You know, what I’m talking about?
Graham: Oh, I know what you’re talking about. The old laser therms.
Ashkahn: The laser guns. Those don’t seem to work very well.
Graham: Yeah, at all really.
Ashkahn: We got one and we tested it. They don’t really work at all.
Graham: We actually confirmed that with the ThermoWorks thermometer company as well. You know, they were pretty much saying getting readings off of the water with the refraction of the salt and just everything going on, you’re not going to be able to measure it and they’re not even that accurate.
Ashkahn: No, even for the things they’re meant to be used for, they’re not really like the most accurate of things.
Graham: They measuring ranges of hundreds of degrees for really … When you’re HVAC system heats up and different things like that, not 0.1 degrees.
Ashkahn: So, it’s tempting, once we started breaking these it’s like something that can take a temperature from a distance sounds really great. But, did not seem to actually be the solution.
Graham: Yup. And, definitely if you are choosing out your own thermometer, obviously there’s many companies that offer these, but definitely take a look at that precision amount. In my mind, again anything that’s above 0.1 degrees is a little too high.
All right.
Ashkahn: Done.
Graham: Sha-bam. Thanks for the question and if you have your own, send them to floattanksolutions.com/podcast.
Recent Podcast Episodes
How to Deal with Humidity in Float Rooms – DSP 185
Humidity can be a subtle, difficult, and persistent challenge for a lot of float centers. Aside from just the massive amount of humidity that a float tank can create, showers also generate a lot of humidity. This can be a challenge for your construction, your soundproofing, and your floater’s comfort.
Fortunately, everyone has to deal with this issue, so there’s a lot of tips out there. Unfortunately, there isn’t an exact science on the best humidity for float rooms as of yet. Graham and Ashkahn unmuddle this quandary a bit before muddling it back up again.
What to do if your Float Center Loses Power – DSP 184
What do you do with your float center if an emergency happens? What if your center loses power for several days and there’s nothing you can do about it? Float tanks rely on having a well regulated system to stay functional and we know that if it gets out of whack, everything can get pretty messy. So if you know this is happening, how do you prevent the worst of it?
Graham and Ashkahn work through this problem and come up with some solutions to prevent things like salt crystallization and upsetting your tank chemistry too much.
How to Handle Business Partner Disputes – DSP 183
It’s often said that having business partners is a lot like having a marriage, and just like a successful marriage, having a successful relationship with your business partner (or partners, we’re not here to judge) requires effective communication, patience, and compromise.
Float On has 5 owners, and they haven’t always agreed on the best course of action. So naturally disagreements happen, but how you handle them is the worthier part. Graham and Ashkahn share their experiences and what’s helped make Float On a success 7 years and counting.
Float Center Name Suggestions – DSP 182
There’s enough float centers out there now to have some established naming conventions for centers. It can feel like all the good names are already taken. Fortunately, Graham and Ashkahn have taken the time come up with a list of a few floaty sounding names that are so far not taken but totally awesome.
What Benefits of Floating have been Proven Scientifically? – DSP 181
Most float centers have to deal with the difficult problem of describing the benefits of floating to those who haven’t tried it yet or are just starting their float journeys. What is safe and accurate to say? Obviously, you don’t want to be advertising false claims if you can help it, but it can be difficult to find accurate information that tells a full story about floating.
Graham and Ashkahn dive into the resources available and clear up some of the confusion surrounding our salty practice. Check out the show notes for a list of great resources!
Latest Blog Posts
How to Reduce Ground Vibrations for Float Tanks
While sound and light proofing are the most salient examples of sensory deprivation involved with float tanks, we receive questions regarding the elimination of low-rumbling noises caused by vibrations from the surrounding environment. Since it’s important that float...
Presenting the 2014 State of the Float Industry
A Word on Our Data Where it Comes from & What it all Means Just before the 2014 Float Conference, we sent out two questionnaires to members of the float community. One targeting existing centers to see how they got started, what they’re doing now, and what...
How to Run Useful Tests With Your Construction
“Negative results are just what I want. They’re just as valuable to me as positive results. I can never find the thing that does the job best until I find the ones that don’t.” ― Thomas A. Edison Test Early, Test Often There are few things as terrifying as spending a...
Before Your Float Center has a Location, Get Online
So… You want to start a float center? One of the first thing people do is they begin researching. They scour the internet for float tank information in preparation for holding educated conversations with future customers. After all, you will be seen as the expert, so...
