Something in the world of floating have you stumped?
Show Highlights
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Show Resources
The Thermoworks Reference Thermometer (Tommy 65,000)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “what type of thermometer do you use?”
Ashkahn: Thermometer.
Graham: Yup. To make the perfect turkey. No, no I assume they mean in your float tank. They didn’t specify.
Ashkahn: Well, we use a handheld thermometer. There’s thermometers in the float tanks, each one it comes with a little thing to tell you the temperature.
Graham: Yeah.
Ashkahn: But, we like having another external handheld thermometer that we use. Because one, we have a variety of models of float tank in our center. So it’s nice for us to have one device we can use from tank to tank, to tank to get a more consistent read out across all of them.
Graham: Yup. It ends up just being nice to also be able to have those around and double check things and just compare. We actually use ones that end up being really precise in their measurements too. So, reference thermometers are actually what they’re called.
We get one that goes down to +/- 0.08 degrees so under point one degrees of accuracy, which often next steps up there get to 0.8 degrees of accuracy is a really common one that you see. At that point it means when you measure you’re within 1.6 degrees of what you think you’re measuring. It’s not a good range, you know.
Ashkahn: What, do you remember? The company’s called ThermoWorks. Do you remember what the actual model of the one we use is?
Graham: Here, I can look it up. Keep … Stall, stall!
Ashkahn: All right. The other nice thing about thermometers is that, if you don’t know if it’s cold or hot, that’s how you figure it out. You use a thermometer. And …
I should say a few things about these thermometers because while we’re tell you the model of the one that we have. It certainly is not perfect. It helps us to be accurate. It breaks on us all the time. It is meant to be kind of water resistant, but it doesn’t seem to be actually able to hold up to the onslaught of water and salt that even when we try to be careful somehow makes its way up the probe into the electronics and eventually they die on us. So, we have two of these one hand at any given point in time because we’re used to one breaking down to the point where we need to send it in for repairs. We’re constantly sending one of these in for repairs.
Graham: Here’s a pro tip too. I recommend naming all of your fragile objects in your shop because it makes people care about them more. This is our theory at least.
Ashkahn: Yeah, we tried naming them. We even tried putting googly eyes on them. Really getting people to have a sentimental attachment to the thermometers so that they wouldn’t be as willing to treat them in a way that would break them, but it still didn’t … If anything it’s made us realize we kill a lot of thermometers. We’ve gone from Tommy to Tuppins to …
Graham: Back to Tommy again.
Ashkahn: Back to Tommy.
Graham: That’s where we are again.
I looked it up. I nailed it before. It’s just their reference thermometer.
Ashkahn: That’s it. It’s just called the ThermoWorks reference thermometer.
Graham: Their handheld reference thermometer, yup.
Ashkahn: Is there like a number? 6500.
Graham: Let’s see. I don’t see a number.
Ashkahn: Okay, well it should be called the 6500. It should have a cool name like that.
Graham: I’ll bring that up with … Here the SKU number’s THS222-555.
Ashkahn: Nice. That sounds way more slick.
Graham: Yeah, it just rolls off the tongue, you know. That’s what we use. We use the THS222-555.
Ashkahn: How much is it?
Graham: Three hundred bucks.
Ashkahn: Three hundred bucks.
Graham: But, the nice thing is when it breaks down, we don’t have to pay that for an entirely new thermometer. We actually just send it back to the company for repairs. Oftentimes it’s the probe that needs to be replaced or the battery pack got corroded. They can just replace those elements.
Ashkahn: For a small fee.
Graham: Like under a hundred bucks, I think.
Ashkahn: But, yeah it still adds up as an expense. It’s a recurring expense for us is keeping working thermometers.
Graham: Yeah. I mean it’s a good lesson I guess, beyond just thermometers too; is not much that’s electronic is long for this world in a float tank center.
Ashkahn: I guess the other thing to mention with thermometers is even if you have the most accurate thermometer in the world you still have to deal with the fact that the water in the float tank might not be uniform. You might be measuring in a spot that is slightly warmer than another spot and it’s not mixed up. Maybe the pump just was running and it heated the water up a little bit. It’s not necessarily the only thing to consider with temperature. There’s just kind of a lot of uncontrollable variables or variables that throw the numbers off a little bit even if you have an incredibly accurate thermometer.
Graham: Yeah, unless you get five of them and make sort of a little grid of probes that you put down across the water at different depths and then write a computer program to kind of take the averages.
Ashkahn: I should say too we have those laser gun thermometers, you know? You know, what I’m talking about?
Graham: Oh, I know what you’re talking about. The old laser therms.
Ashkahn: The laser guns. Those don’t seem to work very well.
Graham: Yeah, at all really.
Ashkahn: We got one and we tested it. They don’t really work at all.
Graham: We actually confirmed that with the ThermoWorks thermometer company as well. You know, they were pretty much saying getting readings off of the water with the refraction of the salt and just everything going on, you’re not going to be able to measure it and they’re not even that accurate.
Ashkahn: No, even for the things they’re meant to be used for, they’re not really like the most accurate of things.
Graham: They measuring ranges of hundreds of degrees for really … When you’re HVAC system heats up and different things like that, not 0.1 degrees.
Ashkahn: So, it’s tempting, once we started breaking these it’s like something that can take a temperature from a distance sounds really great. But, did not seem to actually be the solution.
Graham: Yup. And, definitely if you are choosing out your own thermometer, obviously there’s many companies that offer these, but definitely take a look at that precision amount. In my mind, again anything that’s above 0.1 degrees is a little too high.
All right.
Ashkahn: Done.
Graham: Sha-bam. Thanks for the question and if you have your own, send them to floattanksolutions.com/podcast.
Recent Podcast Episodes
Is it Possible to Float and not get your Hair Wet? – DSP 175
Customers who color or perm their hair might not want to let it get wet while floating. While Graham and Ashkahn are sympathetic to those issues, as far as they know, there isn’t really a great solution for them.
Understanding Chlorine Use in a Float Tank – DSP 174
This is another one of those questions that seems simple but as soon as Graham and Ashkahn start explaining a few things, you realize that there’s a lot of complicated information in the background. A “SSBASAGAASEAFTYRTTALOCIITB”, if you will.
The guys take this opportunity to deep dive on the complex conversation of chlorine and why it’s problematic for the float industry, along with several caveats of the benefits and usefulness of it as a disinfectant.
Should I Offer a Three Float Intro Pack? – DSP 173
Every float center has their own tricks to pricing, appealing to first time customers, and encouraging repeat business. One of the most common is using a three float intro pack that usually offers three floats at a 3 for the price of 2 package. Given how prevalent these are, do they work really well? Is this something that will soon become industry standard? What else needs to be considered before offering a package like this?
Graham and Ashkahn provide their thoughts on this pricing trend and how Float On does pricing (admittedly very differently than a three float intro pack) and what to consider for each float center that looks at this option.
What do You Love About Running a Float Center? – DSP 172
It’s easy to listen to this podcast, day in and day out, and think to yourself “why would ANYONE put up with all these issues?” Graham and Ashkahn describe what keeps them, and probably everybody in the industry, in the difficult business of putting strangers in salty boxes and the wonderful life changing experiences that come with it.
How is the Float Industry Different? – DSP 171
It’s possible that everyone in the float industry intuitively knows that it’s a different sort of business, but what are the tangible ways in which it’s different? As Ashkahn says at the start of the episode, every question in this podcast is kind of a long form answer to this question.
Graham and Ashkahn tackle this problem together, and answer everything from the practical to the philosophical, ranging from lack of expertise in the industry, to the sense of camaraderie that doesn’t seem to exist anywhere else.
Latest Blog Posts
The Creation of the Beginner’s Guide to Floating
Our Beginner's Guide to Floating was first created four years ago, and we've gone through over 40,000 of them just out of our own center in Portland. Since making it publicly available, our Beginner's Guide has been downloaded over 1,400 times. Dozens of float centers...
Transducers: Turning Your Float Tank into a Giant Speaker
All good floats must come to an end... As a float center owner, you’ll have the ability to offer periods of intense isolation and quiet to your customers. That being said, we’ve received many questions about the best (and least disruptive) way of bringing your...
Programming and Metaprogramming in the Human Biocomputer
“In the realm of the mind, there are no limits” - Dr. John C. Lilly As some of you may know, we’ve been working closely with the estate of Dr. Lilly, to ensure that his writings and ideas become more accessible to the public. We’ve started by reprinting his...
Alternative Wellness and Floatation Therapy
Over the past few decades people have come to practice many alternative wellness regimens from outside of the realm of standard Western medicine. Instead of medication and surgery, people have turned to regular bodily maintenance and more natural remedies for their...
