Something in the world of floating have you stumped?
Show Highlights
Being able to measure the temperature of your float tank solution is incredibly important, especially since a small variable can make such a huge difference in the variability of the experience. But what kind of thermometer is going to be the most accurate that can still stand up to the demanding environment of a float center? Graham and Ashkahn weigh in.
Show Resources
The Thermoworks Reference Thermometer (Tommy 65,000)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question is, “what type of thermometer do you use?”
Ashkahn: Thermometer.
Graham: Yup. To make the perfect turkey. No, no I assume they mean in your float tank. They didn’t specify.
Ashkahn: Well, we use a handheld thermometer. There’s thermometers in the float tanks, each one it comes with a little thing to tell you the temperature.
Graham: Yeah.
Ashkahn: But, we like having another external handheld thermometer that we use. Because one, we have a variety of models of float tank in our center. So it’s nice for us to have one device we can use from tank to tank, to tank to get a more consistent read out across all of them.
Graham: Yup. It ends up just being nice to also be able to have those around and double check things and just compare. We actually use ones that end up being really precise in their measurements too. So, reference thermometers are actually what they’re called.
We get one that goes down to +/- 0.08 degrees so under point one degrees of accuracy, which often next steps up there get to 0.8 degrees of accuracy is a really common one that you see. At that point it means when you measure you’re within 1.6 degrees of what you think you’re measuring. It’s not a good range, you know.
Ashkahn: What, do you remember? The company’s called ThermoWorks. Do you remember what the actual model of the one we use is?
Graham: Here, I can look it up. Keep … Stall, stall!
Ashkahn: All right. The other nice thing about thermometers is that, if you don’t know if it’s cold or hot, that’s how you figure it out. You use a thermometer. And …
I should say a few things about these thermometers because while we’re tell you the model of the one that we have. It certainly is not perfect. It helps us to be accurate. It breaks on us all the time. It is meant to be kind of water resistant, but it doesn’t seem to be actually able to hold up to the onslaught of water and salt that even when we try to be careful somehow makes its way up the probe into the electronics and eventually they die on us. So, we have two of these one hand at any given point in time because we’re used to one breaking down to the point where we need to send it in for repairs. We’re constantly sending one of these in for repairs.
Graham: Here’s a pro tip too. I recommend naming all of your fragile objects in your shop because it makes people care about them more. This is our theory at least.
Ashkahn: Yeah, we tried naming them. We even tried putting googly eyes on them. Really getting people to have a sentimental attachment to the thermometers so that they wouldn’t be as willing to treat them in a way that would break them, but it still didn’t … If anything it’s made us realize we kill a lot of thermometers. We’ve gone from Tommy to Tuppins to …
Graham: Back to Tommy again.
Ashkahn: Back to Tommy.
Graham: That’s where we are again.
I looked it up. I nailed it before. It’s just their reference thermometer.
Ashkahn: That’s it. It’s just called the ThermoWorks reference thermometer.
Graham: Their handheld reference thermometer, yup.
Ashkahn: Is there like a number? 6500.
Graham: Let’s see. I don’t see a number.
Ashkahn: Okay, well it should be called the 6500. It should have a cool name like that.
Graham: I’ll bring that up with … Here the SKU number’s THS222-555.
Ashkahn: Nice. That sounds way more slick.
Graham: Yeah, it just rolls off the tongue, you know. That’s what we use. We use the THS222-555.
Ashkahn: How much is it?
Graham: Three hundred bucks.
Ashkahn: Three hundred bucks.
Graham: But, the nice thing is when it breaks down, we don’t have to pay that for an entirely new thermometer. We actually just send it back to the company for repairs. Oftentimes it’s the probe that needs to be replaced or the battery pack got corroded. They can just replace those elements.
Ashkahn: For a small fee.
Graham: Like under a hundred bucks, I think.
Ashkahn: But, yeah it still adds up as an expense. It’s a recurring expense for us is keeping working thermometers.
Graham: Yeah. I mean it’s a good lesson I guess, beyond just thermometers too; is not much that’s electronic is long for this world in a float tank center.
Ashkahn: I guess the other thing to mention with thermometers is even if you have the most accurate thermometer in the world you still have to deal with the fact that the water in the float tank might not be uniform. You might be measuring in a spot that is slightly warmer than another spot and it’s not mixed up. Maybe the pump just was running and it heated the water up a little bit. It’s not necessarily the only thing to consider with temperature. There’s just kind of a lot of uncontrollable variables or variables that throw the numbers off a little bit even if you have an incredibly accurate thermometer.
Graham: Yeah, unless you get five of them and make sort of a little grid of probes that you put down across the water at different depths and then write a computer program to kind of take the averages.
Ashkahn: I should say too we have those laser gun thermometers, you know? You know, what I’m talking about?
Graham: Oh, I know what you’re talking about. The old laser therms.
Ashkahn: The laser guns. Those don’t seem to work very well.
Graham: Yeah, at all really.
Ashkahn: We got one and we tested it. They don’t really work at all.
Graham: We actually confirmed that with the ThermoWorks thermometer company as well. You know, they were pretty much saying getting readings off of the water with the refraction of the salt and just everything going on, you’re not going to be able to measure it and they’re not even that accurate.
Ashkahn: No, even for the things they’re meant to be used for, they’re not really like the most accurate of things.
Graham: They measuring ranges of hundreds of degrees for really … When you’re HVAC system heats up and different things like that, not 0.1 degrees.
Ashkahn: So, it’s tempting, once we started breaking these it’s like something that can take a temperature from a distance sounds really great. But, did not seem to actually be the solution.
Graham: Yup. And, definitely if you are choosing out your own thermometer, obviously there’s many companies that offer these, but definitely take a look at that precision amount. In my mind, again anything that’s above 0.1 degrees is a little too high.
All right.
Ashkahn: Done.
Graham: Sha-bam. Thanks for the question and if you have your own, send them to floattanksolutions.com/podcast.
Recent Podcast Episodes
Should Float Centers Tone Down Their Personality in Rural Areas? (Rise) – DSP 150
Another great conversation that came out of Rise. Graham and Ashkahn sat down with Russ, a local float center owner who is just about to open his doors. He wanted to talk to the guys about how best to present floating to a more rural and conservative area. Graham and Ashkahn have seen float centers from across the world in rural and metropolitan areas alike and share their take on how best to present floating to people who aren’t as exposed to other alternative wellness practices.
Customers Who Overstay Their Welcome (Rise) – DSP 149
Graham and Ashkahn sat down with Mark and Jennifer Gurley at Rise to talk about an issue that can seem scary for float center owners, especially those who haven’t worked in customer service. What do you do about the customer who takes advantage of your generosity and overstays their welcome? How far is too far? And what are the appropriate steps to take when you have someone who won’t respect your boundaries?
Graham and Ashkahn share their experiences from the handful of times it has happened at Float On over the years and how it’s worked out and compare notes with the Gurleys and their float center.
Should I Filter Tap Water When Filling My Tanks (Rise) – DSP 148
Graham and Ashkahn got cornered at Rise with a question from one of the attendees, a float center owner named Gina. And even though the event is over, it’d be a shame to not share this episode. They answer all her questions and concerns about municipal water systems and the levels of filtration that should be done when using water straight from the tap (which probably almost everybody does), they also talk about what you really need to worry about in your tap water.
How do you do All the Things? (Rise) – DSP 147
This episode from Rise comes at you recorded live with another very special guest, Rick from Float St. Louis. Not only does he work in a float center, he’s also releasing a float themed quarterly magazine called Third Wave Magazine. While he was a bit tight lipped about the magazine, his choice of question may speak to just how demanding it has been on him lately.
Listen to him chat with Graham and Ashkahn about how to do all the things and when doing too many things is too much.
Live at Rise Float Gathering! – DSP 146
Graham and Ashkahn are coming at you LIVE (well, recorded live) from the Rise Float Gathering! They managed to wrangle Jake and Kevin, the organizers of Rise and the founders of Float STL in St. Louis. Check out this episode where they talk about bath robes, hosting events, and just how amazing this industry is.
Latest Blog Posts
Back to the Basics
I arrived in Paris a few days ago for a little workcation. Naturally the first thing I did was hunt down a float tank center and book an appointment. Surprisingly, floating seems to be almost entirely missing in France: noticeably more obscure than in Germany, Spain,...
The Profitability of a Float Tank Center
This post is kept for historical purposes, but our current knowledge of float center finances is best found in our Industry Reports. Download them free for real data on float center profits, or ask us about how our Business Plan can help you understand your own float...
Four Simple, but Important Lessons We’ve Learned About Float Room Construction
1 - Put your shower directly next to the float tank. Don't leave even an inch of room. Essentially you want an airlock but for salt- a saltlock. That way they go from their shower directly into the float tank and (more importantly) from the salty float tank straight...
Let’s Go Make a Better World at the Float Conference
For those of you who didn't make it out to the Float Conference this year, I'm posting up the introduction to our program. Although Iwrote this for the conference, I think it will be obvious that the sentiment is industry wide. -- Welcome to the 2nd annual Float...
