Something in the world of floating have you stumped?
Show Highlights
If you don’t know the specific gravity of your float tank solution, it makes it really difficult to make sure you’re providing an accurate float experience to every customer. Hydrometers are tools built specifically for this, but not all hydrometers are created equal. What types of hydrometers should you use and what do you need to look out for? Fortunately, Graham and Ashkahn have a lot of experience shopping for hydrometers (they break fairly easily, unfortunately) and are more than happy to share what they look for in these little measuring devices that help us make the magic happen.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question for us from you, for us to answer to you. Is “what kind of hydrometer do you use?” “You” being “us” in this case.
Ashkahn: I don’t know the actual name of the place we get our hydrometer’s from.
Graham: Isn’t it Scientific …
Ashkahn: Scientific American. It used to be, I don’t know if we still are exactly getting them from there. We might get them online from somewhere. Here is what you are looking for, when you’re looking for a hydrometer. First of all, you’re looking for a specific gravity hydrometer. So there’s nothing in there that’s specifically about the salt water or anything like that. You’re not looking for like an Epsom Salt hydrometer or anything. You’re just looking for something that measures specific gravity.
Graham: And within a certain range. Specific gravity can be pretty broad. You know even lead has like a specific gravity of ten or something like that right?
Ashkahn: And there’s hydrometers for different applications like brewing beer and things like that.
Graham: Battery acid is another common one.
Ashkahn: But most of those are not actually in the right ranges for what you’re looking for. So, typically you’re looking on some sort of company or website that does make scientific equipment. That’s the most common place you’re going to be able to find these on websites or somewhere in town or somewhere like that. Is that scientific equipment company. Basically you’re looking for something that is the range of your float tank. People have their float tank sitting anywhere from maybe 1.24 specific gravity to like 1.29 or something. So, it’s not always easy finding exactly the right range on the hydrometer. Sometimes they go from 1.2 to 1.3 which is okay except that if you ever go above 1.3 then it’s kind of nice to have something that shows you the higher numbers but you never really want to be above there anyway and you kind of want to be balancing down.
Graham: If you could just magically produce a hydrometer at the right range, what do you think is the ideal range to be able to show on it?
Ashkahn: Basically there’s two different ways that I think are both pretty nice. One is just the single hydrometer that would show you your full range. Like if you had like a 1.2 to 1.33 hydrometer would be pretty great. The other one is like the smaller the range is, the easier it is to use because all the numbers and lines and everything are bigger. So the other option and we’ve been done this sometimes when they’ve been out of other types of hydrometer is you can get one that’s like a 1.25 to 1.3 and that’s going to serve your normal use. Every time that you’re checking levels and filling up. But then, you’re going to need another hydrometer with a bigger range when you’re actually filling a float tank up from scratch or something like that.
Graham: Uh huh.
Ashkahn: And another really common range I see all the time is 1.2 to 1.42. So, we’ve done that before too. But I think now we have one … I’ll have to check what we have. We break them so often that it’s hard to keep up sometimes.
Graham: Yeah, we recommend getting fragile glass hydrometers.
Ashkahn: So, a couple more things to know about hydrometers. There is one other application that I know of so far that does conveniently happen to be in the same range as float tanks. Which is what Graham was mentioning: battery acid.
Graham: Yep.
Ashkahn: They keep the specific gravity of battery acid at, actually like shockingly the right range. If you buy a little battery acid hydrometer it even usually has a little green range on it. Which happens to line up with what the good range in a float tank is. Which is really funny.
Graham: So the weird thing with those, despite specific gravity being something that should stay constant is when we’ve gotten the battery acid ones to try out, because a lot of them are you know, you don’t want to be touching battery acid with your bare hand, so they’re kind of made for caustic solutions even. Which is, which is cool.
Ashkahn: Yep.
Graham: But they haven’t given us the accuracy of the other hydrometer and in fact seem, like not, not even close to being able to kind of produce that same level of trustworthy results. When I’ve used just a little again like plastic, handheld, generic battery acid tester.
Ashkahn: Right. So they’re nice in the sense that they’re usually like a dollar. And they’re made of plastic and they have like a turkey baster type mechanism.
Graham: Yeah.
Ashkahn: Which is convenient but we’ve found some that, I don’t know why, but weren’t working at all. And the ones that even do work well is just the specificity you’re getting out of them is not anywhere like where you’re getting out of these scientific glass hydrometers. So we haven’t personally really found them to be useful enough to actually use in our float center. So we go with the, you know, $35/$40 glass ones that you get.
A couple other things to know about hydrometers. One is, you know, you’re taking a sample of the water in your tank into some sort of graduated or non-graduated cylinder and then putting the hydrometer in there to see the levels. The other thing to know is that if that cylinder is too tight that can actually cause the hydrometer reading to be inaccurate. You need to actually have a graduated cylinder that provides a little bit of space around your hydrometer otherwise I think the surface tension of the water kind of like creates a false level that you see there. If the size is too close together. So getting a nice well sized one is going to make your levels more accurate.
Graham: And a note on that too. Because we’re using glass precision hydrometers, we don’t want to put those inside the float tank. So, that’s the reason that we’re pulling out the water to test in the first place. Rather than just letting the hydrometer float in the float tank because the idea of breaking glass inside your float tank just sounds like such a potentially awful, expensive mistake. That there is no way we would even hold a glass object over the body of a float tank. That sounds just too risky so that’s why we’re pulling it out and putting it into a smaller container and floating it there.
Ashkahn: And it’s easier to read, otherwise you have to like lean your face to the water level.
Graham: That’s what all the cool kids are doing.
Ashkahn: The other thing to know about hydrometers and this is more just like a useless piece of information.
Graham: They were invented by Mr. Hydrometer. Back in the late 1700’s.
Ashkahn: All the ones that I’ve ever seen just on these websites are usually calibrated for I think it’s 65 degrees Fahrenheit so they are based off of a temperature. And I’ve never attempted to do anything other than just buy those ones and think it’s probably fine. I’m pretty sure everybody in the industry and all these numbers are basing all these conversations off of, is using hydrometers that are calibrated for a lower temperature than our float tanks actually are. My guess is it’s just probably small enough of a difference and the actual amount of salt in a float tank is not as exact of a science necessary to care about that.
Graham: Probably like the error in us reading the hydrometer is more than the difference in that small amount of temperature.
Ashkahn: Or maybe it’s more and we just don’t know because we’ve never had anyone use an accurate one to see what the difference is.
Graham: Along those lines too, will actually be affected by your altitude and the air pressure on it so your readings will be slightly different at sea level in California than they will in Colorado too.
Ashkahn: But at the end of the day it doesn’t really matter like the levels you’re trying to get your float tanks to have enough wiggle room in them that I don’t think you really care too much about little margins of error and stuff like that. And buy multiple.
Graham: And name them and put googly eyes on them.
Ashkahn: Because you’re going to break them. You can’t put googly eyes on the hydrometer. I think that would probably mess with it’s calibration.
Graham: I guess that’s another thing. We do have nice padded cases.
Ashkahn: Yeah.
Graham: For them, that are essentially like PVC tubes that have foam in them.
Ashkahn: And they sell those, that’s like a product you can buy usually from the same website you’ll find a hydrometer.
Graham: You’ll have to attach your own googly eyes but it doesn’t take very long and they’re pretty inexpensive.
Ashkahn: So yeah, that sums that up.
Graham: Alright, thanks everyone! And especially the person who sent us that question. And if you want to send us your own, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
Should I Wire my Float Tanks into the Wall? – DSP 265
Ashkahn is currently recovering from his talk and the after-party last night, but Jake and Graham have gracefully taken the time to answer a construction question again today.
On the docket today is a question about wiring a float tank directly into the wall. Graham and Jake provide an overview of why some people may prefer this (it’s much easier to keep waterproof, e.g.), and why at Float On they use the twist lock for their outlets and how to properly utilize them.
Can I Keep My Old Ceiling With My Buildout? – DSP 264
Hopefully everyone had a lovely time at the Friday Activities and the after-party.
Ashkahn is still busy running the conference, but Graham and Jake have stepped in to talk about construction!
Today the guys talk about keeping a drop ceiling or T-bar ceiling in an existing space that you’re converting to a float center. The short answer is don’t keep it, as it can cause problems, but the guys do have some workarounds if your landlord is opposed to changing the ceiling.
What to Expect When Expanding from 1 to 3 Tanks? – DSP 263
Ashkahn is busy preparing for everything that happens tonight and tomorrow for the Conference, but that doesn’t mean Daily Solutions will stop being daily.
Graham and Jake talk construction and what to expect when you’re expecting… a giant expansion for your float center. What’s it look like when you go from one tank to three? How do the demands change? What needs to be put in place to make sure that you’re not hitting snags?
Fortunately, these guys know the score and are happy to share.
All About Floor Drains – DSP 262
As Ashkahn gets everything ready for the Start a Center Workshop (happening today) and the Float Conference this weekend, Graham and Jake tackle answering construction questions on the podcast.
Today they’re talking about floor drains. What to consider for drains and how they might pair with different types of flooring. Given the hefty price tag for these more advanced drains, having as much research before making a decision on these is essential. Luckily, the guys have done the hard part already and identified a lot of things to consider.
How to Deal with Float Room Humidity – DSP 261
Graham and Jake are at the helm again while Ashkahn puts the finishing touches on the Float Conference.
Today, the guys are talking all about humidity and how to deal with it when constructing your float rooms. They talk about all the little nuances that you (or your contractor) might not think about when it comes to humidity and how soundproofing and regular airflow may not always go hand in hand.
Latest Blog Posts
The Float Tour Blog – Issue #24
Alberta is often called the Texas of Canada. Part large oil industry, part cattle country.
Don’t Mess With Alberta!
At the base of the Rocky Mountains, replete with an Olympic Stadium, Calgary is a world-class destination for winter sports. The float community developed here similarly to Edmonton – there wasn’t anything nearby except for one or two residential float tanks, and then, in a short period of time, several centers opened all at once. Instead of competing, they’ve decided to work together and have developed one of the tightest knit float communities we’ve seen. They even have monthly Float Dinners, much like we do with the float centers in Portland. They don’t keep meeting minutes, so it’s hard to determine what they talk about at these dinners; my guess would be salt, the effects of salt on various substances, and how salty salt damage can make someone salty.
The Float Tour Blog – Issue #23
After Montana, we blazed our way back into Canada. The drive was long, but the scenery was beautiful. We followed the Rockies north, driving up to Edmonton. It’s a bit of a detour but, there are so many float centers in Edmonton, it seemed crazy not to stop by.
The city itself is primarily made up of workers from the oil fields – high risk, high income jobs that fuel the economy. At least until recently. Our visit was right in the middle of the Fort McMurray wildfire which has displaced a lot of the workforce, forcing 100,000 people to leave their homes. Many came to Edmonton, being the nearest metropolitan area to Fort McMurray. Some already split their time between the two cities, living in Edmonton and traveling to Fort McMurray for weeks or months at a time for work.
It’s understood that, in economic hardship, luxury commodities are typically the first thing people cut back on. Surprisingly, this doesn’t seem to be the case for floating. In fact, more people seem to be trying it to help alleviate the stress, many centers even offering free or discounted services to those displaced in an effort to help in a small way.
The Float Tour Blog – Issue #22
We’ve got two more stops in Colorado Springs before heading west. It’s a town known for its military base and long history of weapons testing. With such a large military presence, it comes as no surprise that the float center owners here are veterans, themselves.
After that, we shoot across to Salt Lake City. Utah is filled with gorgeous sights, from breathtaking lakes to stunning painted hills. With an international landmark famous for its effects on buoyancy, Salt Lake City should be pretty familiar with the concept of floating. With five different float centers, and the manufacturer of the Zen Tent out there, there could be some cause and effect.
After that, we head up into Idaho and Montana to close out the Central United States portion of our Tour. We’ll follow the Rocky Mountains north, taking in the scenery along the way.
The Float Tour Blog – Issue #21
Denver has been home to a vibrant float community for a long time. Some of the earliest commercial centers that started up in the ‘70s and ‘80s were out here. 30 years is a long time, and most of the old centers aren’t around anymore, but there’s a conscious community that has been floating since the old days and they love how much the industry has evolved and grown.
