Something in the world of floating have you stumped?
Show Highlights
If you don’t know the specific gravity of your float tank solution, it makes it really difficult to make sure you’re providing an accurate float experience to every customer. Hydrometers are tools built specifically for this, but not all hydrometers are created equal. What types of hydrometers should you use and what do you need to look out for? Fortunately, Graham and Ashkahn have a lot of experience shopping for hydrometers (they break fairly easily, unfortunately) and are more than happy to share what they look for in these little measuring devices that help us make the magic happen.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: Today’s question for us from you, for us to answer to you. Is “what kind of hydrometer do you use?” “You” being “us” in this case.
Ashkahn: I don’t know the actual name of the place we get our hydrometer’s from.
Graham: Isn’t it Scientific …
Ashkahn: Scientific American. It used to be, I don’t know if we still are exactly getting them from there. We might get them online from somewhere. Here is what you are looking for, when you’re looking for a hydrometer. First of all, you’re looking for a specific gravity hydrometer. So there’s nothing in there that’s specifically about the salt water or anything like that. You’re not looking for like an Epsom Salt hydrometer or anything. You’re just looking for something that measures specific gravity.
Graham: And within a certain range. Specific gravity can be pretty broad. You know even lead has like a specific gravity of ten or something like that right?
Ashkahn: And there’s hydrometers for different applications like brewing beer and things like that.
Graham: Battery acid is another common one.
Ashkahn: But most of those are not actually in the right ranges for what you’re looking for. So, typically you’re looking on some sort of company or website that does make scientific equipment. That’s the most common place you’re going to be able to find these on websites or somewhere in town or somewhere like that. Is that scientific equipment company. Basically you’re looking for something that is the range of your float tank. People have their float tank sitting anywhere from maybe 1.24 specific gravity to like 1.29 or something. So, it’s not always easy finding exactly the right range on the hydrometer. Sometimes they go from 1.2 to 1.3 which is okay except that if you ever go above 1.3 then it’s kind of nice to have something that shows you the higher numbers but you never really want to be above there anyway and you kind of want to be balancing down.
Graham: If you could just magically produce a hydrometer at the right range, what do you think is the ideal range to be able to show on it?
Ashkahn: Basically there’s two different ways that I think are both pretty nice. One is just the single hydrometer that would show you your full range. Like if you had like a 1.2 to 1.33 hydrometer would be pretty great. The other one is like the smaller the range is, the easier it is to use because all the numbers and lines and everything are bigger. So the other option and we’ve been done this sometimes when they’ve been out of other types of hydrometer is you can get one that’s like a 1.25 to 1.3 and that’s going to serve your normal use. Every time that you’re checking levels and filling up. But then, you’re going to need another hydrometer with a bigger range when you’re actually filling a float tank up from scratch or something like that.
Graham: Uh huh.
Ashkahn: And another really common range I see all the time is 1.2 to 1.42. So, we’ve done that before too. But I think now we have one … I’ll have to check what we have. We break them so often that it’s hard to keep up sometimes.
Graham: Yeah, we recommend getting fragile glass hydrometers.
Ashkahn: So, a couple more things to know about hydrometers. There is one other application that I know of so far that does conveniently happen to be in the same range as float tanks. Which is what Graham was mentioning: battery acid.
Graham: Yep.
Ashkahn: They keep the specific gravity of battery acid at, actually like shockingly the right range. If you buy a little battery acid hydrometer it even usually has a little green range on it. Which happens to line up with what the good range in a float tank is. Which is really funny.
Graham: So the weird thing with those, despite specific gravity being something that should stay constant is when we’ve gotten the battery acid ones to try out, because a lot of them are you know, you don’t want to be touching battery acid with your bare hand, so they’re kind of made for caustic solutions even. Which is, which is cool.
Ashkahn: Yep.
Graham: But they haven’t given us the accuracy of the other hydrometer and in fact seem, like not, not even close to being able to kind of produce that same level of trustworthy results. When I’ve used just a little again like plastic, handheld, generic battery acid tester.
Ashkahn: Right. So they’re nice in the sense that they’re usually like a dollar. And they’re made of plastic and they have like a turkey baster type mechanism.
Graham: Yeah.
Ashkahn: Which is convenient but we’ve found some that, I don’t know why, but weren’t working at all. And the ones that even do work well is just the specificity you’re getting out of them is not anywhere like where you’re getting out of these scientific glass hydrometers. So we haven’t personally really found them to be useful enough to actually use in our float center. So we go with the, you know, $35/$40 glass ones that you get.
A couple other things to know about hydrometers. One is, you know, you’re taking a sample of the water in your tank into some sort of graduated or non-graduated cylinder and then putting the hydrometer in there to see the levels. The other thing to know is that if that cylinder is too tight that can actually cause the hydrometer reading to be inaccurate. You need to actually have a graduated cylinder that provides a little bit of space around your hydrometer otherwise I think the surface tension of the water kind of like creates a false level that you see there. If the size is too close together. So getting a nice well sized one is going to make your levels more accurate.
Graham: And a note on that too. Because we’re using glass precision hydrometers, we don’t want to put those inside the float tank. So, that’s the reason that we’re pulling out the water to test in the first place. Rather than just letting the hydrometer float in the float tank because the idea of breaking glass inside your float tank just sounds like such a potentially awful, expensive mistake. That there is no way we would even hold a glass object over the body of a float tank. That sounds just too risky so that’s why we’re pulling it out and putting it into a smaller container and floating it there.
Ashkahn: And it’s easier to read, otherwise you have to like lean your face to the water level.
Graham: That’s what all the cool kids are doing.
Ashkahn: The other thing to know about hydrometers and this is more just like a useless piece of information.
Graham: They were invented by Mr. Hydrometer. Back in the late 1700’s.
Ashkahn: All the ones that I’ve ever seen just on these websites are usually calibrated for I think it’s 65 degrees Fahrenheit so they are based off of a temperature. And I’ve never attempted to do anything other than just buy those ones and think it’s probably fine. I’m pretty sure everybody in the industry and all these numbers are basing all these conversations off of, is using hydrometers that are calibrated for a lower temperature than our float tanks actually are. My guess is it’s just probably small enough of a difference and the actual amount of salt in a float tank is not as exact of a science necessary to care about that.
Graham: Probably like the error in us reading the hydrometer is more than the difference in that small amount of temperature.
Ashkahn: Or maybe it’s more and we just don’t know because we’ve never had anyone use an accurate one to see what the difference is.
Graham: Along those lines too, will actually be affected by your altitude and the air pressure on it so your readings will be slightly different at sea level in California than they will in Colorado too.
Ashkahn: But at the end of the day it doesn’t really matter like the levels you’re trying to get your float tanks to have enough wiggle room in them that I don’t think you really care too much about little margins of error and stuff like that. And buy multiple.
Graham: And name them and put googly eyes on them.
Ashkahn: Because you’re going to break them. You can’t put googly eyes on the hydrometer. I think that would probably mess with it’s calibration.
Graham: I guess that’s another thing. We do have nice padded cases.
Ashkahn: Yeah.
Graham: For them, that are essentially like PVC tubes that have foam in them.
Ashkahn: And they sell those, that’s like a product you can buy usually from the same website you’ll find a hydrometer.
Graham: You’ll have to attach your own googly eyes but it doesn’t take very long and they’re pretty inexpensive.
Ashkahn: So yeah, that sums that up.
Graham: Alright, thanks everyone! And especially the person who sent us that question. And if you want to send us your own, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
When it’s Time to Fire Your Customers – DSP 120
This is one of those situations that’s never fun to be in, but it’s something that’s gotta be dealt with. A customer is rude, unpleasant, or makes the staff or other customers uncomfortable. It can start small and turn into a repeated and difficult problem. As the business owner, oftentimes, the buck stops with you and you have to figure out how to handle that situation.
Graham and Ashkahn share their experiences at Float On with their problematic customers and how they handled it while offering tidbits of advice.
Funding your center through Kickstarter – DSP 119
Crowdfunding has made so many projects possible that would otherwise not exist. It seems perfect for niche ideas, concepts that would otherwise never see the light of day, and passion projects that just need to happen. This sounds perfect for float centers, but there are some caveats.
Crowdfunding is time intensive and there’s not guarantee of success. Aside from that, there are some issues with it that complicate things for float centers that other crowdfunded projects likely won’t face. Graham and Ashkahn talk about the successes of float center crowdfunding and the not-so-successes as well.
Don’t Build Your Own Float Tank! – DSP 118
For anyone considering a DIY float tank, give this episode a listen first. This isn’t a discussion on the merits of doing things one way versus another or expressing an opinion on one side and playing devil’s advocate for the other. Graham and Ashkahn know painfully well from personal experience the pitfalls of falling into the hubris trap of thinking you can build your own float tanks. They built two large open tanks in Float On and even years later they still cause headaches.
What’s more, they’ve spoken with dozens of people who’ve also gone through this themselves and heard their horror stories after they didn’t listen to the advice of not doing it.
The perception that it can be a cost-cutting measure or a more reliable way to get an operating float tank in your center by going DIY is generally pretty flawed. There’s so much to it that you just can’t consider before the fact.
Should Your Float Center have a Blog? – DSP 117
This seems like a good idea on paper. It helps with SEO stuff for Google. It gives you an outlet to write about floating and share information about the industry. And it seems to fall in line with something that other businesses do, right?
So what are the downsides? How much time and effort does a blog really take? What sort of impact does it have for a float center? Graham and Ashkahn lay out the pros and cons as well as things you may not initially consider about the responsibility of having a blog.
Thoughts on Buying Yelp Ads – DSP 116
There are lots of businesses that experience the dogged persistence of Yelp sales people calling them. Float On has done both buying Yelp ad space and living without it and Graham and Ashkahn break down exactly what that experience was like.
They also go into exactly what Yelp ads mean and how it impacts your float center (or doesn’t, as the case may be) as well as how well Yelp stacks up in comparison to other ad sources.
Latest Blog Posts
Much Ado About Nothing
Today, I’d like to talk to you about nothing. But first I suppose I should introduce myself. My name is Ashkahn, and I’m one of the co-founders of Float On. I’ve spent the last 2 years of my life entirely devoted to these magical boxes we’ve all discovered, and...
Past & Present of Oasis & Future of Floating
My focus here/now will be on the past [portion of this 'assignment'] that set me up to be involved in floatation work... It was probably inevitable that I would end up involved with float tanks .... When your last name is Wasserman, which means 'waterman' in german*,...
Past, Present, Future
My life is focused around balance. This is the key to everything I do; A balance between cosmic vows of spirituality, family, and the business with the scales constantly being tipped back and forth on the scale.To understand why I am involved in the Flotation Industry...
The Art of Managing Expectations
When considering opening a floatation center, I came across the following story that helped me understand the process that I was going to be going through as the owner of Float Matrix. There once was a plumber who was excellent at what he did. He knew everything...
