Something in the world of floating have you stumped?
Show Highlights
While Ashkahn is off doing whatever it is Ashkahn does when not on the podcast, Graham sits down with Jake Marty the Float On construction guy (and co-owner of Float On), to talk about Quietrock.
Now before you rush to the Resources section to see which ones are best, this episode lays out the reason to use Quietrock, when (and how) to compromise for more affordable options, and where you may not want to use this when planning your build out.
Show Resources
Get your tickets for the Float Conference coming up this week!
Quietrock EZ-SNAP (Jake recommends the 525 mold and mildew resistant)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right. Hello, everybody. This is Graham over here.
Jake Marty: And this is Jake Marty over here. How are you doing?
Graham: The Construction Man himself.
Jake Marty: Among other things, but yeah.
Graham: We’re not joined by Ashkahn today, whose absence is sorely felt. He’s getting ready for the conference, which is right around the corner, coming up August 18th and 19th. If you don’t already have your tickets, definitely go and grab those. So he’ll be back and recording podcasts soon, but in the meantime, we’re going to take some episodes here, maybe a week or two, to go over some of your construction questions, as long as we have Jake Marty in town.
To kick things off, the first question we have is, “What type of QuietRock do you guys recommend for float rooms?”
Jake Marty: What type of QuietRock? Well, that’s kind of a loaded question. Well, because-
Graham: First of all, it assumes we know what we’re talking about.
Jake Marty: Yeah. Somebody thinks that we know what we’re talking about. Well, we do use, actually, a couple different types of soundproofing drywall. When we do use QuietRock, we use the 525 EZ-Snap.
Graham: Let’s back up a little bit first before we go too deep into it, which is a) what is QuietRock?
Jake Marty: Right. QuietRock is a soundproofing drywall. Basically, it’s really dense, really heavy gypsum, two layers of it sandwiched together with an acoustical compound in between, kind of like a little PB&J gypsum sandwich. It’s very delicious. Don’t eat it. Don’t eat that stuff.
But, basically, you’re just kind of creating a very heavy, very dense piece of drywall that has a much higher STC rating than your regular drywall. And since it’s on the interior float rooms and stuff like that, we actually use the mold-and-mildew-resistant sheets, as well, anytime within those spaces.
Graham: Yep, and it’s definitely not the only type of soundproofing that you can do as far as drywall goes. I mean, you can even just use regular five-eighths-inch drywall-
Jake Marty: Absolutely.
Graham: And layer it, maybe, with, again, an acoustical compound in between. Green Glue is kind of the most tested ones-
Jake Marty: Kind of the Kleenex of that world or whatever?
Graham: Yeah, yeah. Definitely the Kleenex of acoustical compounds. Yeah.
Jake Marty: And we’ve heard combinations, as well, because it all comes down to budget. We’re constantly talking about theory, and we’re constantly like, “What would be ideal?” But, at the end of the day, you have to match what your budget is. So we’ll see some people do one layer of soundproofing drywall and then another layer of just regular drywall on top of that, again, like Graham said, with the acoustical compound in between the two sheets.
Graham: A little pro tip there. What you’re actually doing is separating your materials and kind of changing densities in between when you add that acoustical compound-
Jake Marty: Yeah. It helps.
Graham: -in between, which is, it kind of really is like a butter. Green Glue, again, it’s like a-
Jake Marty: Yeah. It’s a-
Graham: You know, it’s like-
Jake Marty: It’s like a slime.
Graham: Yeah, it’s like a slime that you put in between.
Jake Marty: It just comes out of a giant tube, big caulk gun.
Graham: So the idea there is that when the sound waves hit your first sheet of drywall or your first sheet of QuietRock, rather than just pass through the exact same density into the next sheet behind them, they now have to go through this slime, which whenever sound waves change densities of material, they break up a little bit. And it kind of diffuses them.
So that’s sort of the idea behind putting that in between the sheets as opposed to just layering them directly when we’re referencing an acoustical compound separating sheets of wall.
Jake Marty: Yeah, absolutely. Also, it is worth noting, since we are kind of talking about QuietRock here, that we don’t use that on ceilings because it’s not actually rated in moist environments to be mounted on the ceiling. So we’ll end up using another brand of soundproofing drywall called SilentFX, kind of the QuietRock’s competitor.
Another thing to kind of keep in mind, this all depends on where you’re at not only in the country but in the world. Like in Australia, they’re not going to be shipping in QuietRock. That’s cost prohibitive. They’re going to be using their own type of soundproofing drywall as long as it hits the same STC ratings that we’re trying to shoot for.
Graham: Yep, and the cost one is really interesting, too, because QuietRock is pretty much the most expensive soundproofing drywall that I’ve seen out there.
Jake Marty: Yeah.
Graham: So deciding to just go with QuietRock right off the bat as opposed to another solution is saying, “We’re sort of skipping straight to the big boys or the heavy hitters here.” It might not actually perform better than other solutions, and correct me if I’m wrong, Jake, but I think the reason that QuietRock is so expensive is because they are the most robustly tested-
Jake Marty: Absolutely.
Graham: -drywall solution out there. The amount of actual just sound tests-
Jake Marty: Independent lab testing.
Graham: -they put all of their products through means they’re verified to give a certain level of soundproofing, whereas the others might do just as well, but we don’t know for sure. So when you-
Jake Marty: It might also just be marketing, right? People can put anything they want on the outside of their package if it hasn’t been independently verified. So that’s something that gets scary, whereas we know QuietRock is testing their stuff.
Graham: Yeah. You’re just sort of paying for peace of mind and for that certainty that it’s actually certified and verified. So that’s why when QuietRock gets brought up and it’s kind of maybe the de facto soundproofing for walls, that’s really why it’s getting brought up, is because of that rigorous testing they’ve gone through.
Jake Marty: Something to keep in mind when you’re thinking about that as well, when it went off to independent lab testing, that was their perfect form. There were no gaps between their drywall. Everything was built perfectly. What we take away from that is that’s what we need in our float center. We need contractors that will pay attention to detail because the weakest point in the system it destroys everything, really.
Any sloppy work, like if the installer does not do a good job, then you’ve just paid a lot of money for something that’s not doing what it’s designed to do. So going all the way back to your contractors, it’s not just the materials. It’s the people that use the materials.
Graham: Yeah, yeah. For sure. That’s a huge one that we see all the time. You can do your soundproofing 99 percent correctly, and that one percent can ruin the effectiveness of any soundproofing you did. It’s such a details game.
Jake Marty: It’s very, very similar to waterproofing. One small pinhole in your waterproofing system, and salt, that little bugger, gets in there and it just starts destroying things. Sound waves, very pervasive. Very similar to that beautiful magnesium sulfate we all love so much.
Graham: Okay. I guess we should answer their real question now that we’ve given a lot of background on this, which is, “What type of QuietRock do we recommend?” In general, the EZ-Snap is kind of the basic wall QuietRock. If you’re doing your lobby walls, anything that’s not in a wet or really moist area, probably the EZ-Snap is what you’re going with.
Jake Marty: Yeah, and then again, in those moist wet areas like the float rooms, we use the mold and mildew resistant or just the mold-resistant sheets.
Graham: Yep. Also EZ-Snap.
Jake Marty: Yeah. There’s actually a whole line of QuietRock. The 525 EZ-Snap is not insanely expensive, and it’s pretty effective. And it’s five-eighths of an inch thick, so it meets a lot of code requirements. You can spend a lot of money. They just go up: the 525, the 535, the 545.
Graham: Some of them just start getting up to, like, I don’t know-
Jake Marty: That one’s two inches thick.
Graham: Yeah. It’s crazy.
Jake Marty: $300 a sheet. The only people that buy those are, like, movie theaters, I guess. That’s the only thing I can really think of.
Graham: So yeah. There you go. A little background on QuietRock, some of what you should use, and again, it’s very hefty. So if you start actually quoting out your entire float center for double-layered QuietRock with the mold and mildew resistant on the inside, expect to be shocked at the price tag you get back, and probably realize that you can’t actually do that throughout your entire space. You might need to decide exactly where you want to double up on certain walls and where you want to skimp and save and stuff like that.
Know that if you do put that down, you’re just saying, “I’m willing to invest a huge amount of money in this soundproofing.” To me, I guess it’s a little scary, especially for first-time float centers, too, going that route, because it’s also saying, “I think I did my waterproofing perfectly, and I’m not going to mess up the soundproofing on the inside of my float rooms,” because it’s also terrifying. Once you’re installing these really expensive sheets of drywall on the interior of your float rooms, that’s also a lot of stuff that can get damaged by moisture and saltwater and stuff like that.
So yeah. It’s a very personal decision, I guess, deciding where you’re going to draw those lines and which side of the monetary fence you’re going to come in on?
Jake Marty: Yeah, for sure. Often, I’m getting calls and questions about how we can pare down a budget, how we can trim down a budget, because it’s coming in $120 a square foot or something like that, and they only budgeted $80 a square foot. Where we’ll see that taken away is maybe in those hallways that is shared with other float rooms or something like that, and then we’ll soundproof heavy on the lobby side because you have all that noise out front, all the interactions and everything like that, where it’s like you might not need soundproofing drywall in your bathroom, you know what I mean?
Graham: Yeah.
Jake Marty: So yeah.
Graham: Yeah, and of course, where you’re located has a lot to do with it, too.
Jake Marty: Yeah. For sure.
Graham: If you’re out in the middle of a forest versus off of a busy street in the middle of a city, you can cut down on a lot of soundproofing.
Jake Marty: If you’re out in the middle of the forest, you could probably put a float tank in a yurt. That might be nice.
Graham: All right. If you have questions of your own, especially for the next couple weeks, any construction questions, definitely head on over to floattanksolutions.com/podcast, and we will attempt to answer them.
Jake Marty: We’ll do our best.
Graham: All right. Thanks, everybody.
Jake Marty: Yeah. Thank you so much.
Recent Podcast Episodes
When should you call it quits? – DSP 94
Deciding when to close down is a challenge in any business, but it can hit especially hard for a float center. The upfront costs to build out are much higher than other industries, many of which simply cannot be recouped. When do you decide that it’s time to cut your losses and move on? What expenses can you recoup?
Graham and Ashkahn tackle this difficult question with laying out some sensible guidelines about what it means to run a business and how to go about it in a way that makes you comfortable.
Leaving a tank unattended for a week – DSP 93
Float tanks are like giant salty babies sometimes. Between water sanitation, temperature control, and filtration…they require a lot of attention and care, and even when you do things perfectly they can still make giant salty messes everywhere. So how do you leave your baby alone for a week? How do you prepare for that? Unlike a human baby, you can take your float tank with you (or at least it’s unlikely).
Choosing a Shower Disinfectant for your float center – DSP 92
A recommendation for a shower cleaner should be a fairly straightforward answer, right? Well… maybe not. Graham and Ashkahn are very particular about the definitions of things like “sanitation” “disinfectant” and other common cleaning terms. In this episode, they take the time to explain what product labels typically mean and what you want to look for when getting a surface cleaner for your float center.
Be ready to dive in and do some extra reading when getting into this episode. There’s a lot of terminology to parse and clarify. Fortunately, it’s Graham and Ashkahn so they have lots of really clear advice, like “don’t mix bleach and ammonia (or any homemade cleaning product, really)”.
When Does a Float Start? – DSP 91
Time management and maintaining your schedule is one of the most important quality controls in a float center. If you can’t get people out on time, it can throw off your schedule for the rest of the day. So, when does a float start? How do you measure that time? And what do you do if a floater starts late? Cut off their float? The next persons?
Graham and Ashkahn have been running Float On in a particular way for a long time now, and have particular insights into the challenges of how you manage your schedule.
Tips for filling an empty service schedule – DSP 90
There are fewer things more stress inducing for a float center than seeing their schedule for the week and having it just be completely empty (Maybe watching your pump start up and spray water over your entire float room, but it’s a close call). What do you do in that situation? And how do you prevent it from happening in the future?
Well, Graham and Ashkahn have tried everything, from doing shout outs and deals on social media, to literally walking down the street trying to convince people to come in and float while the tanks were empty. Some tactics are more effective than others, but what it really comes down, at least in Float On’s case, is being prepared to give out a ton of free floats.
The guys talk about the effectiveness of each strategy they’ve tried and how they’ve reached out to contacts to form mutually beneficial business relationships and really get the ball rolling with filling up their tanks.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
