Something in the world of floating have you stumped?
Show Highlights
While Ashkahn is off doing whatever it is Ashkahn does when not on the podcast, Graham sits down with Jake Marty the Float On construction guy (and co-owner of Float On), to talk about Quietrock.
Now before you rush to the Resources section to see which ones are best, this episode lays out the reason to use Quietrock, when (and how) to compromise for more affordable options, and where you may not want to use this when planning your build out.
Show Resources
Get your tickets for the Float Conference coming up this week!
Quietrock EZ-SNAP (Jake recommends the 525 mold and mildew resistant)
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right. Hello, everybody. This is Graham over here.
Jake Marty: And this is Jake Marty over here. How are you doing?
Graham: The Construction Man himself.
Jake Marty: Among other things, but yeah.
Graham: We’re not joined by Ashkahn today, whose absence is sorely felt. He’s getting ready for the conference, which is right around the corner, coming up August 18th and 19th. If you don’t already have your tickets, definitely go and grab those. So he’ll be back and recording podcasts soon, but in the meantime, we’re going to take some episodes here, maybe a week or two, to go over some of your construction questions, as long as we have Jake Marty in town.
To kick things off, the first question we have is, “What type of QuietRock do you guys recommend for float rooms?”
Jake Marty: What type of QuietRock? Well, that’s kind of a loaded question. Well, because-
Graham: First of all, it assumes we know what we’re talking about.
Jake Marty: Yeah. Somebody thinks that we know what we’re talking about. Well, we do use, actually, a couple different types of soundproofing drywall. When we do use QuietRock, we use the 525 EZ-Snap.
Graham: Let’s back up a little bit first before we go too deep into it, which is a) what is QuietRock?
Jake Marty: Right. QuietRock is a soundproofing drywall. Basically, it’s really dense, really heavy gypsum, two layers of it sandwiched together with an acoustical compound in between, kind of like a little PB&J gypsum sandwich. It’s very delicious. Don’t eat it. Don’t eat that stuff.
But, basically, you’re just kind of creating a very heavy, very dense piece of drywall that has a much higher STC rating than your regular drywall. And since it’s on the interior float rooms and stuff like that, we actually use the mold-and-mildew-resistant sheets, as well, anytime within those spaces.
Graham: Yep, and it’s definitely not the only type of soundproofing that you can do as far as drywall goes. I mean, you can even just use regular five-eighths-inch drywall-
Jake Marty: Absolutely.
Graham: And layer it, maybe, with, again, an acoustical compound in between. Green Glue is kind of the most tested ones-
Jake Marty: Kind of the Kleenex of that world or whatever?
Graham: Yeah, yeah. Definitely the Kleenex of acoustical compounds. Yeah.
Jake Marty: And we’ve heard combinations, as well, because it all comes down to budget. We’re constantly talking about theory, and we’re constantly like, “What would be ideal?” But, at the end of the day, you have to match what your budget is. So we’ll see some people do one layer of soundproofing drywall and then another layer of just regular drywall on top of that, again, like Graham said, with the acoustical compound in between the two sheets.
Graham: A little pro tip there. What you’re actually doing is separating your materials and kind of changing densities in between when you add that acoustical compound-
Jake Marty: Yeah. It helps.
Graham: -in between, which is, it kind of really is like a butter. Green Glue, again, it’s like a-
Jake Marty: Yeah. It’s a-
Graham: You know, it’s like-
Jake Marty: It’s like a slime.
Graham: Yeah, it’s like a slime that you put in between.
Jake Marty: It just comes out of a giant tube, big caulk gun.
Graham: So the idea there is that when the sound waves hit your first sheet of drywall or your first sheet of QuietRock, rather than just pass through the exact same density into the next sheet behind them, they now have to go through this slime, which whenever sound waves change densities of material, they break up a little bit. And it kind of diffuses them.
So that’s sort of the idea behind putting that in between the sheets as opposed to just layering them directly when we’re referencing an acoustical compound separating sheets of wall.
Jake Marty: Yeah, absolutely. Also, it is worth noting, since we are kind of talking about QuietRock here, that we don’t use that on ceilings because it’s not actually rated in moist environments to be mounted on the ceiling. So we’ll end up using another brand of soundproofing drywall called SilentFX, kind of the QuietRock’s competitor.
Another thing to kind of keep in mind, this all depends on where you’re at not only in the country but in the world. Like in Australia, they’re not going to be shipping in QuietRock. That’s cost prohibitive. They’re going to be using their own type of soundproofing drywall as long as it hits the same STC ratings that we’re trying to shoot for.
Graham: Yep, and the cost one is really interesting, too, because QuietRock is pretty much the most expensive soundproofing drywall that I’ve seen out there.
Jake Marty: Yeah.
Graham: So deciding to just go with QuietRock right off the bat as opposed to another solution is saying, “We’re sort of skipping straight to the big boys or the heavy hitters here.” It might not actually perform better than other solutions, and correct me if I’m wrong, Jake, but I think the reason that QuietRock is so expensive is because they are the most robustly tested-
Jake Marty: Absolutely.
Graham: -drywall solution out there. The amount of actual just sound tests-
Jake Marty: Independent lab testing.
Graham: -they put all of their products through means they’re verified to give a certain level of soundproofing, whereas the others might do just as well, but we don’t know for sure. So when you-
Jake Marty: It might also just be marketing, right? People can put anything they want on the outside of their package if it hasn’t been independently verified. So that’s something that gets scary, whereas we know QuietRock is testing their stuff.
Graham: Yeah. You’re just sort of paying for peace of mind and for that certainty that it’s actually certified and verified. So that’s why when QuietRock gets brought up and it’s kind of maybe the de facto soundproofing for walls, that’s really why it’s getting brought up, is because of that rigorous testing they’ve gone through.
Jake Marty: Something to keep in mind when you’re thinking about that as well, when it went off to independent lab testing, that was their perfect form. There were no gaps between their drywall. Everything was built perfectly. What we take away from that is that’s what we need in our float center. We need contractors that will pay attention to detail because the weakest point in the system it destroys everything, really.
Any sloppy work, like if the installer does not do a good job, then you’ve just paid a lot of money for something that’s not doing what it’s designed to do. So going all the way back to your contractors, it’s not just the materials. It’s the people that use the materials.
Graham: Yeah, yeah. For sure. That’s a huge one that we see all the time. You can do your soundproofing 99 percent correctly, and that one percent can ruin the effectiveness of any soundproofing you did. It’s such a details game.
Jake Marty: It’s very, very similar to waterproofing. One small pinhole in your waterproofing system, and salt, that little bugger, gets in there and it just starts destroying things. Sound waves, very pervasive. Very similar to that beautiful magnesium sulfate we all love so much.
Graham: Okay. I guess we should answer their real question now that we’ve given a lot of background on this, which is, “What type of QuietRock do we recommend?” In general, the EZ-Snap is kind of the basic wall QuietRock. If you’re doing your lobby walls, anything that’s not in a wet or really moist area, probably the EZ-Snap is what you’re going with.
Jake Marty: Yeah, and then again, in those moist wet areas like the float rooms, we use the mold and mildew resistant or just the mold-resistant sheets.
Graham: Yep. Also EZ-Snap.
Jake Marty: Yeah. There’s actually a whole line of QuietRock. The 525 EZ-Snap is not insanely expensive, and it’s pretty effective. And it’s five-eighths of an inch thick, so it meets a lot of code requirements. You can spend a lot of money. They just go up: the 525, the 535, the 545.
Graham: Some of them just start getting up to, like, I don’t know-
Jake Marty: That one’s two inches thick.
Graham: Yeah. It’s crazy.
Jake Marty: $300 a sheet. The only people that buy those are, like, movie theaters, I guess. That’s the only thing I can really think of.
Graham: So yeah. There you go. A little background on QuietRock, some of what you should use, and again, it’s very hefty. So if you start actually quoting out your entire float center for double-layered QuietRock with the mold and mildew resistant on the inside, expect to be shocked at the price tag you get back, and probably realize that you can’t actually do that throughout your entire space. You might need to decide exactly where you want to double up on certain walls and where you want to skimp and save and stuff like that.
Know that if you do put that down, you’re just saying, “I’m willing to invest a huge amount of money in this soundproofing.” To me, I guess it’s a little scary, especially for first-time float centers, too, going that route, because it’s also saying, “I think I did my waterproofing perfectly, and I’m not going to mess up the soundproofing on the inside of my float rooms,” because it’s also terrifying. Once you’re installing these really expensive sheets of drywall on the interior of your float rooms, that’s also a lot of stuff that can get damaged by moisture and saltwater and stuff like that.
So yeah. It’s a very personal decision, I guess, deciding where you’re going to draw those lines and which side of the monetary fence you’re going to come in on?
Jake Marty: Yeah, for sure. Often, I’m getting calls and questions about how we can pare down a budget, how we can trim down a budget, because it’s coming in $120 a square foot or something like that, and they only budgeted $80 a square foot. Where we’ll see that taken away is maybe in those hallways that is shared with other float rooms or something like that, and then we’ll soundproof heavy on the lobby side because you have all that noise out front, all the interactions and everything like that, where it’s like you might not need soundproofing drywall in your bathroom, you know what I mean?
Graham: Yeah.
Jake Marty: So yeah.
Graham: Yeah, and of course, where you’re located has a lot to do with it, too.
Jake Marty: Yeah. For sure.
Graham: If you’re out in the middle of a forest versus off of a busy street in the middle of a city, you can cut down on a lot of soundproofing.
Jake Marty: If you’re out in the middle of the forest, you could probably put a float tank in a yurt. That might be nice.
Graham: All right. If you have questions of your own, especially for the next couple weeks, any construction questions, definitely head on over to floattanksolutions.com/podcast, and we will attempt to answer them.
Jake Marty: We’ll do our best.
Graham: All right. Thanks, everybody.
Jake Marty: Yeah. Thank you so much.
Recent Podcast Episodes
pH testing devices for float tank solution – DSP 89
There are lots of things you can measure when testing the quality of your water, for sanitation and comfort. Many of which aren’t specifically designed for float tanks. This is kind of an open secret in the industry, but most things simply aren’t accurate because of the incredibly high salinity of float tank solution. And pH seems to be one of them. This can cause float center owners major headaches as it’s often one of the first things that health departments/regulators will want to measure when they come and inspect your place (if they do at all).
Graham and Ashkahn try to break down this mystery of float water and try to break down some theories as to why it might be that float tank water might not have accurate pH readings, regardless of how you measure it.
Handling humidity to reduce water drops on tank ceilings – DSP 88
One of the biggest Float Mysteries in the industry is how to properly deal with condensation in a float tank. Your float tank is basically a giant humidity generating machine so clearly there’s going to be some condensation, but how much and why it forms can vary for seemingly no reason, making managing it difficult. The last thing any float center owner wants is for it to affect the floats they’re running (little water droplets falling on floaters is no fun).
Graham and Ashkahn commiserate with the industry about the difficulties in dealing with this particular hot topic, while also delving into the science of it and common solutions that should help any float center owner that’s facing this problem.
The purpose of a flow meters and the flow rate for a float tank – DSP 87
When navigating demands from health departments, it can be an absolute minefield of regulation, oftentimes with holdovers from the pool and spa industries. Many of these can be superfluous to float centers, but if you’re just starting a center, it’s difficult to know which ones to ignore, and which ones to incorporate.
Flow meters fall into this weird gray area where they’re not as important for float centers as for pools (and in some cases aren’t really needed at all), but can still be required by health departments or regulators. And to not throw the baby out with the salty bathwater, there are definitely some very practical uses for flow meters on float tanks.
Graham and Ashkahn tackle all these confusing elements and even provide specific product recommendations for flow meters for float tanks. Give it a listen!
When to contact health department – DSP 86
Contacting your health department/inspector/regulator/enforcer/supreme overlord can be stressful, to say the least. And given their general lack of understanding of floating as an industry, it makes sense why float centers may put this off. However, they have the authority to shut down your business if they feel that it’s a public safety issue, and that’s a situation no one should put themselves in.
Talking to your health department early and often can save yourself some headaches, but you don’t want to go to them unprepared. There’s a lot of nuance to regulation and existing codes that you should probably be familiar with beforehand. Fortunately, it may be something other float centers in your area have had to deal with, if there are any.
Ashkahn and Graham have a few tips for what to do to prepare and how to address common concerns they may have in this episode.
Thoughts on facilitating couples floats – DSP 85
First off, we’ll just say that Float On does not offer couples floats and never has. Graham and Ashkahn dive into their reasoning for that decision while simultaneously addressing some of the common concerns and benefits that go along with the practice. Some people say it helps get people into the tanks that wouldn’t try it otherwise. Some smaller centers rely on the added revenue per tank and increased exposure to the practice. It’s a complicated question and one that each center will likely have to consider on their own.
Latest Blog Posts
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
