Something in the world of floating have you stumped?
Show Highlights
You have to change out your float tank water eventually. Is it a good idea to give your float tank a vinegar cleanse when you do? is that effective? Is it too much work for the results? Are there better solutions to keep your tank clean and fresh?
Graham and Ashkahn discuss while providing assurances like “either you’re not crazy or we’re all crazy”, so that’s nice.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right. Hello everybody.
Ashkahn: Hey, everyone. This is Ashkahn.
Graham: Graham over here, and we got a question for you today.
Ashkahn: Nice, that’s good.
Graham: Just like every day, yeah.
Ashkahn: I’m impressed every time.
Graham: Which is, and I always say that. I should say we have an answer for you today, because really the questions are for us.
Ashkahn: We got both, we got both.
Graham: The question is, “we have a crazy idea of draining float tanks and then running 200 gallons of water mixed with vinegar for an amount of time. Do you think there would be some decent cleaning?”
Ashkahn: All right, so assumptions-
Graham: Decent. Let’s define decent.
Ashkahn: Let’s make some assumptions first. I’m assuming they’re talking about doing this at the point they’re draining their float tank, once-
Graham: Anyway, right? Not like they’re just draining it and they’re-
Ashkahn: They’re not doing this every night. Yeah. Dump the water, throw some tap water in there and get-
Graham: 200 gallons of vinegar.
Ashkahn: 200 gallons of vinegar. That’s not what they said, but assuming you’re like, “Okay, yeah. I’m draining my float tank,” on whatever kind of periodic schedule that I’ve decided, a year or whatever it is. At that point, should I be doing this crazy scheme? And-
Graham: Sort of.
Ashkahn: Yeah, sort of. I mean, so it’s not crazy.
Graham: Well, we came up with it, so it might be crazy as well. Not the vinegar part, but the … this is something that we’ve started doing to, when we drain our float tanks is to actually kind of run a full cleaning kind of cycle through them to deal with anything that might be collecting on the inside of the pipes. Biofilm, things like that. So certainly the desire to make sure that your entire system’s kinda of flushed out, as long as you’re doing a big drain and fill, is totally sane and reasonable.
Ashkahn: Yeah. I would probably say the main thing to think about is vinegar is probably not what you want to put in there.
Graham: Yeah.
Ashkahn: It’s just really not that strong of a cleaning agent. I mean, it can clean things. It’s good at killing things. It’s not as good as many, many other things you could probably use. As long as you’re just putting tap water in there and you’re putting some cleaning agent in, and you’re gonna dump all this afterwards, you might as well use something stronger than vinegar.
Graham: Super vinegar.
Ashkahn: Yeah, it’s like you let vinegar ferment a third time, and then it becomes super vinegar.
Graham: Super vinegar. Probably bleach is just the easiest thing to be able to toss in there, which is basically just chlorine.
Ashkahn: Yeah. Bleach is just kinda concentrated chlorine, and you can just put a decently high concentration.
Graham: 200 gallons of bleach.
Ashkahn: Then you’re not gonna expose anyone to being in this liquid, right? So you’re kind of hitting it probably with a different method than maybe you’re used to using with other things that you’re typically cleaning your float tanks with, whatever. Using peroxide or ozone, or relying on the UV or whatever it is. Even if you’re using chlorine. Getting to a really high, kind of super-chlorinated dose of it for a period of time can have kind of an extra sanitation boost.
Graham: Yeah, and it just seems to be the go-to for a lot of disinfecting, too, that you see from different health departments and recommendations. Bleach is just an easily available and easy to use disinfectant as long as you’re not worried about, again, people kind of getting in the water afterwards. Which you’re not. You’re just sort of doing a flush and fill. That’s what we decided, was pretty much this exact same protocol that you’re talking about, where you’re emptying your float tank, filling it back up, running cycles through with water. Only in our case, we’re using bleach rather than vinegar.
Ashkahn: And there are calculators online if you want to be a little bit more quantitative about what you’re doing. You can find online calculators that will tell you how much bleach you’re pouring in and what level of parts per million of chlorine that turns into. So you can actually kind of shoot for a certain number or do something other than just turning a bottle of bleach over and counting for three seconds.
Graham: The old glug and chug method, huh?
Ashkahn: I don’t know about chugging, but-
Graham: I meant chugging along, not like-
Ashkahn: I see, I see. Take a quick sip. Pour some in the float tank.
Graham: Half for the tank, half for me. Yeah, don’t do that.
Ashkahn: Yeah, this periodic sort of cleaning can be good. There’s kind of a conversation in the pool and spa world more recently than ever about these things called biofilms, and that’s where certain microorganisms can build up these protective shell layers outside of them that protects them from the exposure of different sanitizers that would usually be able to kill them. One of the methods of being able to deal with stuff like that is having these kind of periodic, long-term punches of super-sanitation that you do to your system. The best kind of analogy I heard was relating it to keeping your teeth clean. You want to brush your teeth every night, but also it’s good to go to the dentist once every six months and have them do kind of like a more intense cleaning of your teeth that you’re not gonna be able to do with your toothbrush. That same kind of logic, I think, makes sense in the world of sanitation. If you have these kind of longer cycles of more intense cleaning, it’s, I think, another step or another effective way of keeping things at bay.
Graham: There’s pretty much no harm to it, either. You know, as long as you’re not adding in enough bleach that you’re worried about staining your tubs or something like that-
Ashkahn: Your filter’s not filled with ammonia, or something?
Graham: There’s not really any concern to your float tank for doing it. Other than a little extra time spent in when you’re draining it out. Doing this intermediate step before immediately refilling with salt water. That’s really the only cost of adding in what I think is a really nice precaution to other things growing in there or anything that might be hanging out in your pipes.
Ashkahn: So, you’re not crazy. I guess that’s-
Graham: Or we’re all crazy. One of the two, yeah.
Ashkahn: Yeah. We’re in it together, if that’s the case.
Graham: And if you have any more questions you want to send over to us, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
HIPAA Compliance – DSP 330
The Health Insurance Portability and Accountability Act of 1996 (HIPAA) required the Secretary of the U.S. Department of Health and Human Services (HHS) to develop regulations protecting the privacy and security of certain health information. This means that most medical information recorded by healthcare providers has to be stored based on a certain standard of security.
This is only just now becoming an issue in the float industry as centers are starting to accept insurance and medical referrals. However, this is still extremely rare. If this is something that may affect you personally, definitely research additional resources to make sure you’re in compliance.
Getting High (on air) in Float Tanks – DSP 329
Graham and Ashkahn light one up to honestly answer what they think about people coming into float centers high.
The guys share their experiences having Float On share a wall with a dispensary and the number of problems (or lack thereof) that it has caused over the course of many years.
Sit back, grab some munchies, and enjoy the ride with these guys.
What you Need to Know about UV – DSP 328
Have you ever wondered why the UV light on a float tank needs to be replaced so often? If the light is glowing, doesn’t that mean it’s working?
Ashkahn and Graham tackle everything you need to know about UV light, how it works in a float tank, and most importantly, how it can go wrong. This episode is dense with information useful for anyone who uses UV in their float center.
What’s going on with the MAHC? – DSP 327
The Model Aquatic Health Code is a document released by the CDC and has made waves throughout the float industry as this year it included a section on the ideal health department code for float centers as well as pools and spas. Some folks are worried about this because it may mean more rigid and unruly regulations in certain areas.
It’s been a few months since its release, so Graham and Ashkahn give an update to how it has impacted the industry and what it means going forward. Also, Ashkahn learns to abuse the show notes.
Logo Copycats – DSP 326
If you’ve ever looked at a collection of logos from various float centers, they can start to look a little similar. How do you avoid this when designing your own float center logo? Is it a big deal?
Graham and Ashkahn dish on logo design, the importance of simplicity, and a not so subtle reminder that the “don’t be an asshole” rule exists for a reason.
Latest Blog Posts
Should I Have One or Multiple Styles of Float Tank?
If you had every model and type of float tank you’d be running the Burj Khalifa of float centers, with an estimated 38 unique float tanks, which include pods, custom open pools, cabins, vertical tanks, and inflatable or portable float devices currently on the market (not even counting old models).
This is all to say that there are a ton of options out there when considering tanks for your center.
Whether you’re opening a two-tank center, or a bajillion-tank center, do you want all the same model, or will you have some variety?
Why ROI Calculators Suck! (or at least why you should use caution)
“What is an ROI calculator?” I hear you asking. “ROI” simply stands for “Return on Investment”. An “ROI Calculator” is just a tool that outlines the cost of something and generates what your anticipated profit will be over a certain length of time. Usually annually.
We should make a distinction between a simple ROI calculator (i.e. a widget built into a website with limited inputs), and a financial plan (complete with P&L, cashflow, and balance sheets). Both are going to try and do the same thing, but one is going to be far more detailed and accurate.
Roughly what we’re going to be talking about is a return on investment for your whole business, but return on investment can (and should) be used for lots of different aspects to your business to help you determine how best to spend your company’s money. Usually, though, that’s going to require a lot of detail that a simple widget can’t provide.
How to compete on price without slashing prices
Let’s say you’re a float tank center and more centers are starting to show up in your town…
Or, maybe you are that other center starting up a town that already has float tanks…
As new centers enter the market, the typical response is to run promotions on daily deal sites, promote large specials, and/or run Facebook Ads selling floats for much less than the usual offerings.
The best case scenario is this price slashing behavior subsides shortly after the neighboring center opens.
But what if it doesn’t? What if an existing competitor decides their new price is even lower?
How do you compete with a price slashing neighbor without competing on price?
Learn a few ways to make price a non issue with your customers…
Float On’s Halloween Spooktacular!
‘Twas briny, and the epsom groves fluttered with salt-bats, a lurking fog floating atop the murky bog. From the dark maw of silence came a guttural groan, an eerie utterance akin to those of monsters. From the depths of darkness, that groan turned into what mortals...
