Learn best practices for starting and running a float center:
  • This field is for validation purposes and should be left unchanged.

Something in the world of floating have you stumped?

  • This field is for validation purposes and should be left unchanged.

Show Highlights

You have to change out your float tank water eventually. Is it a good idea to give your float tank a vinegar cleanse when you do? is that effective? Is it too much work for the results? Are there better solutions to keep your tank clean and fresh?

Graham and Ashkahn discuss while providing assurances like “either you’re not crazy or we’re all crazy”, so that’s nice.

Listen to Just the Audio

Transcription of this episode… (in case you prefer reading)

Graham: All right. Hello everybody.

Ashkahn: Hey, everyone. This is Ashkahn.

Graham: Graham over here, and we got a question for you today.

Ashkahn: Nice, that’s good.

Graham: Just like every day, yeah.

Ashkahn: I’m impressed every time.

Graham: Which is, and I always say that. I should say we have an answer for you today, because really the questions are for us.

Ashkahn: We got both, we got both.

Graham: The question is, “we have a crazy idea of draining float tanks and then running 200 gallons of water mixed with vinegar for an amount of time. Do you think there would be some decent cleaning?”

Ashkahn: All right, so assumptions-

Graham: Decent. Let’s define decent.

Ashkahn: Let’s make some assumptions first. I’m assuming they’re talking about doing this at the point they’re draining their float tank, once-

Graham: Anyway, right? Not like they’re just draining it and they’re-

Ashkahn: They’re not doing this every night. Yeah. Dump the water, throw some tap water in there and get-

Graham: 200 gallons of vinegar.

Ashkahn: 200 gallons of vinegar. That’s not what they said, but assuming you’re like, “Okay, yeah. I’m draining my float tank,” on whatever kind of periodic schedule that I’ve decided, a year or whatever it is. At that point, should I be doing this crazy scheme? And-

Graham: Sort of.

Ashkahn: Yeah, sort of. I mean, so it’s not crazy.

Graham: Well, we came up with it, so it might be crazy as well. Not the vinegar part, but the … this is something that we’ve started doing to, when we drain our float tanks is to actually kind of run a full cleaning kind of cycle through them to deal with anything that might be collecting on the inside of the pipes. Biofilm, things like that. So certainly the desire to make sure that your entire system’s kinda of flushed out, as long as you’re doing a big drain and fill, is totally sane and reasonable.

Ashkahn: Yeah. I would probably say the main thing to think about is vinegar is probably not what you want to put in there.

Graham: Yeah.

Ashkahn: It’s just really not that strong of a cleaning agent. I mean, it can clean things. It’s good at killing things. It’s not as good as many, many other things you could probably use. As long as you’re just putting tap water in there and you’re putting some cleaning agent in, and you’re gonna dump all this afterwards, you might as well use something stronger than vinegar.

Graham: Super vinegar.

Ashkahn: Yeah, it’s like you let vinegar ferment a third time, and then it becomes super vinegar.

Graham: Super vinegar. Probably bleach is just the easiest thing to be able to toss in there, which is basically just chlorine.

Ashkahn: Yeah. Bleach is just kinda concentrated chlorine, and you can just put a decently high concentration.

Graham: 200 gallons of bleach.

Ashkahn: Then you’re not gonna expose anyone to being in this liquid, right? So you’re kind of hitting it probably with a different method than maybe you’re used to using with other things that you’re typically cleaning your float tanks with, whatever. Using peroxide or ozone, or relying on the UV or whatever it is. Even if you’re using chlorine. Getting to a really high, kind of super-chlorinated dose of it for a period of time can have kind of an extra sanitation boost.

Graham: Yeah, and it just seems to be the go-to for a lot of disinfecting, too, that you see from different health departments and recommendations. Bleach is just an easily available and easy to use disinfectant as long as you’re not worried about, again, people kind of getting in the water afterwards. Which you’re not. You’re just sort of doing a flush and fill. That’s what we decided, was pretty much this exact same protocol that you’re talking about, where you’re emptying your float tank, filling it back up, running cycles through with water. Only in our case, we’re using bleach rather than vinegar.

Ashkahn: And there are calculators online if you want to be a little bit more quantitative about what you’re doing. You can find online calculators that will tell you how much bleach you’re pouring in and what level of parts per million of chlorine that turns into. So you can actually kind of shoot for a certain number or do something other than just turning a bottle of bleach over and counting for three seconds.

Graham: The old glug and chug method, huh?

Ashkahn: I don’t know about chugging, but-

Graham: I meant chugging along, not like-

Ashkahn: I see, I see. Take a quick sip. Pour some in the float tank.

Graham: Half for the tank, half for me. Yeah, don’t do that.

Ashkahn: Yeah, this periodic sort of cleaning can be good. There’s kind of a conversation in the pool and spa world more recently than ever about these things called biofilms, and that’s where certain microorganisms can build up these protective shell layers outside of them that protects them from the exposure of different sanitizers that would usually be able to kill them. One of the methods of being able to deal with stuff like that is having these kind of periodic, long-term punches of super-sanitation that you do to your system. The best kind of analogy I heard was relating it to keeping your teeth clean. You want to brush your teeth every night, but also it’s good to go to the dentist once every six months and have them do kind of like a more intense cleaning of your teeth that you’re not gonna be able to do with your toothbrush. That same kind of logic, I think, makes sense in the world of sanitation. If you have these kind of longer cycles of more intense cleaning, it’s, I think, another step or another effective way of keeping things at bay.

Graham: There’s pretty much no harm to it, either. You know, as long as you’re not adding in enough bleach that you’re worried about staining your tubs or something like that-

Ashkahn: Your filter’s not filled with ammonia, or something?

Graham: There’s not really any concern to your float tank for doing it. Other than a little extra time spent in when you’re draining it out. Doing this intermediate step before immediately refilling with salt water. That’s really the only cost of adding in what I think is a really nice precaution to other things growing in there or anything that might be hanging out in your pipes.

Ashkahn: So, you’re not crazy. I guess that’s-

Graham: Or we’re all crazy. One of the two, yeah.

Ashkahn: Yeah. We’re in it together, if that’s the case.

Graham: And if you have any more questions you want to send over to us, go to floattanksolutions.com/podcast.

Recent Podcast Episodes

How to Help Float Research – DSP 300

With the push from Justin Feinstein at LIBR to get more float centers involved in research, many float center owners are chomping at the bit to push studies forward on the benefits of floating. But where do you start and how do you make it happen? 

Graham and Ashkahn discuss this idea and how to do research right, as well as some of the things that might be helpful OR harmful to the world of floating in the eyes of the scientific community. There’s a lot of nuanced things to know about proper research and if you go in overzealous without considering how established science is done, it can harm the reputation of the practice. 

Tips on Running Power to Float Rooms – DSP 299

Graham and Ashkahn offer some helpful tips to keep in mind when planning out the electrical framework for your float rooms. How many circuits you should plan for, where to place outlets, GFCI compliance, just to name a few. 

Definitely an essential episode for anyone to listen to before going into their build-out phase. 

Floating in National Media – DSP 298

Seeing float tanks in the national news and culture has increased in regularity within the last few years. Graham and Ashkahn discuss how these things get on such a large platform. The guys briefly go over some of the major stories that have been all over the media and how those stories happened. Mostly it comes down to luck, but there are a few things that can increases the chances of your float center getting on national TV. 

The Real Tips on Building Your Own Float Tank – DSP 297

Someone wrote in and asked, again, despite the repeated warnings of the previous episode covering this topic, how to build a float tank properly. 

Graham and Ashkahn try their best to restrain themselves and offer some practical advice about how to build your own tanks while also repeatedly warning about things to look out for when going forward with the process.

How to Handle Other Float Centers Spying on You – DSP 296

Graham and Ashkahn talk about how they deal with other float centers spying on Float On. 

Basically… they don’t. The float industry is a really open community and a lot of information is generally freely available. If someone is spying on a float center, that could be a result of poor communication skills or a lack of awareness of what information is actually out there. The guys share their advice on how to talk to someone who might be in that situation and how to move forward, hopefully as friends instead of rivals. 

Latest Blog Posts

Reflections from the Rise Float Gathering

Reflections from the Rise Float Gathering

Over this past weekend, a good chunk of the Float Tank Solutions and Float Conference crew ventured to St. Louis, MO for the first ever Rise Community Float Gathering. Beyond our excitement to see old friends and meet new ones, we were thrilled to be able to attend a float event that we didn’t have to plan.

When it comes to float tanks, we often deal with a lot of the “what” and the “how” of things – what do I need to do to open a float center and how to I make everything work? We write blogs and put out content. We spend our days thinking about conference flowcharts, water chemistry, detailed business plans, soundproof insulation, etc.

Rise, on the other hand, focused on the “why?”

The Story Behind the Float Marketing Forum

The Story Behind the Float Marketing Forum

Over the past few years, primarily through feedback received from conference attendees and through industry survey responses, float center owners struggled with and wanted a solution to one thing… marketing. It makes sense – if there’s one thing every center needs (besides salt), it’s a solid flow of customers in tanks.

After some brainstorming with Ashkahn, we’ve decided the best solution for this year was to host a series panels covering key marketing topics that will provide the biggest impact in growing your float center business.

Introducing: The Float Conference Marketing Forum.

Announcing the 2nd Ever Start-a-Center Giveaway WINNER!

Announcing the 2nd Ever Start-a-Center Giveaway WINNER!

In what was one of the most difficult decisions that we had to make as a team… and after sorting through nearly 200 entries… we’ve decided upon a winner in our second ever Start-a-Center Giveaway.

Read more to learn who we’ll be guiding through the process in starting a float tank center in their community.

Gut your space before construction!

Gut your space before construction!

One line we don’t think you should cross is this: as much as possible, when building out your float center, gut it completely. Start from scratch.

At least then the mistakes you make are your own and your building will hold fewer surprises down the line. There are many benefits that you may not think of immediately. In this post, we’ll guide you through some of them.