Something in the world of floating have you stumped?
Show Highlights
You have to change out your float tank water eventually. Is it a good idea to give your float tank a vinegar cleanse when you do? is that effective? Is it too much work for the results? Are there better solutions to keep your tank clean and fresh?
Graham and Ashkahn discuss while providing assurances like “either you’re not crazy or we’re all crazy”, so that’s nice.
Listen to Just the Audio
Transcription of this episode… (in case you prefer reading)
Graham: All right. Hello everybody.
Ashkahn: Hey, everyone. This is Ashkahn.
Graham: Graham over here, and we got a question for you today.
Ashkahn: Nice, that’s good.
Graham: Just like every day, yeah.
Ashkahn: I’m impressed every time.
Graham: Which is, and I always say that. I should say we have an answer for you today, because really the questions are for us.
Ashkahn: We got both, we got both.
Graham: The question is, “we have a crazy idea of draining float tanks and then running 200 gallons of water mixed with vinegar for an amount of time. Do you think there would be some decent cleaning?”
Ashkahn: All right, so assumptions-
Graham: Decent. Let’s define decent.
Ashkahn: Let’s make some assumptions first. I’m assuming they’re talking about doing this at the point they’re draining their float tank, once-
Graham: Anyway, right? Not like they’re just draining it and they’re-
Ashkahn: They’re not doing this every night. Yeah. Dump the water, throw some tap water in there and get-
Graham: 200 gallons of vinegar.
Ashkahn: 200 gallons of vinegar. That’s not what they said, but assuming you’re like, “Okay, yeah. I’m draining my float tank,” on whatever kind of periodic schedule that I’ve decided, a year or whatever it is. At that point, should I be doing this crazy scheme? And-
Graham: Sort of.
Ashkahn: Yeah, sort of. I mean, so it’s not crazy.
Graham: Well, we came up with it, so it might be crazy as well. Not the vinegar part, but the … this is something that we’ve started doing to, when we drain our float tanks is to actually kind of run a full cleaning kind of cycle through them to deal with anything that might be collecting on the inside of the pipes. Biofilm, things like that. So certainly the desire to make sure that your entire system’s kinda of flushed out, as long as you’re doing a big drain and fill, is totally sane and reasonable.
Ashkahn: Yeah. I would probably say the main thing to think about is vinegar is probably not what you want to put in there.
Graham: Yeah.
Ashkahn: It’s just really not that strong of a cleaning agent. I mean, it can clean things. It’s good at killing things. It’s not as good as many, many other things you could probably use. As long as you’re just putting tap water in there and you’re putting some cleaning agent in, and you’re gonna dump all this afterwards, you might as well use something stronger than vinegar.
Graham: Super vinegar.
Ashkahn: Yeah, it’s like you let vinegar ferment a third time, and then it becomes super vinegar.
Graham: Super vinegar. Probably bleach is just the easiest thing to be able to toss in there, which is basically just chlorine.
Ashkahn: Yeah. Bleach is just kinda concentrated chlorine, and you can just put a decently high concentration.
Graham: 200 gallons of bleach.
Ashkahn: Then you’re not gonna expose anyone to being in this liquid, right? So you’re kind of hitting it probably with a different method than maybe you’re used to using with other things that you’re typically cleaning your float tanks with, whatever. Using peroxide or ozone, or relying on the UV or whatever it is. Even if you’re using chlorine. Getting to a really high, kind of super-chlorinated dose of it for a period of time can have kind of an extra sanitation boost.
Graham: Yeah, and it just seems to be the go-to for a lot of disinfecting, too, that you see from different health departments and recommendations. Bleach is just an easily available and easy to use disinfectant as long as you’re not worried about, again, people kind of getting in the water afterwards. Which you’re not. You’re just sort of doing a flush and fill. That’s what we decided, was pretty much this exact same protocol that you’re talking about, where you’re emptying your float tank, filling it back up, running cycles through with water. Only in our case, we’re using bleach rather than vinegar.
Ashkahn: And there are calculators online if you want to be a little bit more quantitative about what you’re doing. You can find online calculators that will tell you how much bleach you’re pouring in and what level of parts per million of chlorine that turns into. So you can actually kind of shoot for a certain number or do something other than just turning a bottle of bleach over and counting for three seconds.
Graham: The old glug and chug method, huh?
Ashkahn: I don’t know about chugging, but-
Graham: I meant chugging along, not like-
Ashkahn: I see, I see. Take a quick sip. Pour some in the float tank.
Graham: Half for the tank, half for me. Yeah, don’t do that.
Ashkahn: Yeah, this periodic sort of cleaning can be good. There’s kind of a conversation in the pool and spa world more recently than ever about these things called biofilms, and that’s where certain microorganisms can build up these protective shell layers outside of them that protects them from the exposure of different sanitizers that would usually be able to kill them. One of the methods of being able to deal with stuff like that is having these kind of periodic, long-term punches of super-sanitation that you do to your system. The best kind of analogy I heard was relating it to keeping your teeth clean. You want to brush your teeth every night, but also it’s good to go to the dentist once every six months and have them do kind of like a more intense cleaning of your teeth that you’re not gonna be able to do with your toothbrush. That same kind of logic, I think, makes sense in the world of sanitation. If you have these kind of longer cycles of more intense cleaning, it’s, I think, another step or another effective way of keeping things at bay.
Graham: There’s pretty much no harm to it, either. You know, as long as you’re not adding in enough bleach that you’re worried about staining your tubs or something like that-
Ashkahn: Your filter’s not filled with ammonia, or something?
Graham: There’s not really any concern to your float tank for doing it. Other than a little extra time spent in when you’re draining it out. Doing this intermediate step before immediately refilling with salt water. That’s really the only cost of adding in what I think is a really nice precaution to other things growing in there or anything that might be hanging out in your pipes.
Ashkahn: So, you’re not crazy. I guess that’s-
Graham: Or we’re all crazy. One of the two, yeah.
Ashkahn: Yeah. We’re in it together, if that’s the case.
Graham: And if you have any more questions you want to send over to us, go to floattanksolutions.com/podcast.
Recent Podcast Episodes
What’s a Reasonable Amount to Spend on Facebook Ads? – DSP 194
Welcome back to Social Media Week!
After talking so much about the fundamentals of social media and its impact on float center marketing, we’re finally able to answer some of the more complex questions that float centers ask. If you haven’t listened to the rest of the Social Media posts from this week, it is strongly recommended you check those out first.
In this episode, Derek provides practical advice for how much to spend on ads for your center, and while each location is going to be different, there are some tried and true tips to follow to help each center find their ideal advertising system.
Choosing Facebook Ad Options for Float Centers – DSP 193
Today on Social Media week, Derek educates Ashkahn and Graham on what exactly it’s like placing an ad on Facebook.
Facebook, as well as other social media sites, provide a cornucopia of options for targeting your ad based on employment, interests, age range, and lots of others. For float centers, this can become fairly confusing, especially since floating doesn’t have demographics in the traditional sense.
Derek clears things up and explains to Graham, Ashkahn, and the rest of the float community, exactly why these options exist and what might work for a specific center.
What the Hell is Facebook Pixel? – DSP 192
Welcome back to Social Media Week!
A Pixel is a tool used when creating an ad account that allows you to create target audiences for your ads. How you use it and what to use it on are more complicated answers though.
Fortunately, Graham and Ashkahn have Derek to use as a resource and they have him break down how best to utilize target audiences and how to get the best bang for your buck.
Can you Cross Post to Different Social Media Platforms? – DSP 191
Today on Social Media Week, Ashkahn and Graham pick Derek’s brain about how to get content for several different social media platforms.
Derek shares his tips for how best to broaden your reach with your social media and not fatigue your audience with the same content on multiple platforms. He also shares what type of content works well on different platforms.
How Often Should I Post on my Float Center’s Social Media? – DSP 190
On the second day of social media week, Ashkahn and Graham ask Derek how often float centers should post as well as what makes good content.
Derek lays out practical tips for how to schedule your social media (DON’T AUTOMATE), as well as what makes a good post. Facebook has several algorithms to limit your reach depending on the post so it’s important to avoid certain keywords and post topics to reach the broadest audience without paying for it.
Latest Blog Posts
Finding Funding for Your Float Tank Center
Starting a float center isn’t an inexpensive business opportunity. Depending on the type of float tanks you choose, size of your retail space among other factors, a center can cost between $65-100k per room to fully set up. While centers have started for less money up front, the cost of frequent repairs from salt damage and cutting corners during construction will cost more money in the long run.
Water Hardness in a Float Tank
What is water hardness? Water hardness is, at its most basic, the presence of certain minerals in water. Historically, water hardness was a measure of water’s ability to form lather during laundering. Harder water, due to it’s high calcium/magnesium content, would...
A Blogging Experiment Brought to You By…
At Float Tank Solutions, we're always playing around with different ways to provide benefits to everyone. We've gone a long time actively turning down sponsorship money, to ensure that we stay a source of (as much as is humanly possible) impartial information for...
How To Keep Empty Tanks Warm
The goal of any float center is to never have an empty tank. However, reality says that there will be slow times of the year, last minute cancelations, and unexplained openings in the schedule that will require you to maintain the temperature of an empty tank until...
